A Better(?) (Hyper)Link Control

• Download source files - 9 Kb
• Download demo project - 45 Kb

Introduction

This is my implementation of a (hyper)link control.  I have been sitting on it for a while, and finally decided to release it.  While there are may other implementations of link controls out there, none of the ones that I have found really act like the ones used in Internet Explorer^�.  For example, many of them are based on the Static control, and as such are unable to be focused using the keyboard, which means that they are useless without a mouse (accessibility issue), and have incorrect click behavior.

My implementation of the link control offers some features not commonly found in other implementations:

• It is based on (subclasses) the Button control, so it can be focused and navigated just like any other control
• It can be activated by the keyboard (using the <ENTER> key)
• It correctly activates on the Button-Up, not the Button-Down
• It contains a built-in ToolTip
• It draws and behaves correctly when disabled
• Its colors and fonts are completely customizable
• It supports the ability to launch both URLs and the contents of a SHELLEXECUTEINFO structure (see below)
• It can be dragged and dropped just like a link in Internet Explorer (try dragging it from the demo application to an instance of IE or the Desktop)
• It uses WM_NOTIFY-based notification messages (the Win32 way) to notify the parent of mouse activity, and gives the parent the ability to deny an activation request, or cancel a Drag-n-Drop operation, etc.

Background

To fully understand the benefits this implementation of the hyperlink control has to offer, experiment with the links on this page using your browser.  Can you navigate them using the mouse and keyboard?  How do you activate the control with the mouse; on the Button-Down or the Button-Up?  What happens when you Button-Down over the control, but move the mouse off of it and then Button-Up?  What happens when you Button-Down somewhere else, but then Button-Up over the control?  Etc.

Using The Control

The code for the CJRTSLinkCtrl class is wrapped up in the JRTSLinkCtrl.cpp and JRTSLinkCtrl.h files.  The CJRTSLinkCtrl class is used to subclass an existing Button control, just as you would normally use the CButton class.  For best ease of use, rebuild your ClassWizard database and include the code for this class when you do.  That way, you will be able to bind a CJRTSLinkCtrl class from within ClassWizard.

Now, let us explore the class by going through its header file from top to bottom.  We will start with the WM_NOTIFY-based Notification Messages and the NMHDR-Based Notification Structure.

const  UINT  NMLC_DBLCLICK    =  NM_DBLCLK;         // Double-Click Notification Message

const  UINT  NMLC_SETFOCUS    =  NM_SETFOCUS;       // Control Has Gained The Input Focus

const  UINT  NMLC_KILLFOCUS   =  NM_KILLFOCUS;      // Control Has Lost The Input Focus

const  UINT  NMLC_RCLICK      =  NM_RCLICK;         // Right-Click In Control

const  UINT  NMLC_RDBLCLICK   =  NM_RDBLCLICK;      // Double-Right-Click In Control

const  UINT  NMLC_ACTIVATE    =  ( NM_FIRST - 90 ); // Link Activate Notification Message

const  UINT  NMLC_MOUSEENTER  =  ( NM_FIRST - 89 ); // Mouse Enter Link Notification

const  UINT  NMLC_MOUSEHOVER  =  ( NM_FIRST - 88 ); // Mouse Hover Notification

const  UINT  NMLC_MOUSELEAVE  =  ( NM_FIRST - 87 ); // Mouse Leave Notification

const  UINT  NMLC_BEGINDRAG   =  ( NM_FIRST - 86 ); // Begin Drag Operation Notification

const  UINT  NMLC_ENDDRAG     =  ( NM_FIRST - 85 ); // End Drag Operation Notification

const  UINT  NMLC_BEGINRDRAG  =  ( NM_FIRST - 84 ); // Begin RDrag Operation Notification

const  UINT  NMLC_ENDRDRAG    =  ( NM_FIRST - 83 ); // End RDrag Operation Notification

const  UINT  NMLC_MCLICK      =  ( NM_FIRST - 82 ); // MButton Click

const  UINT  NMLC_MDBLCLICK   =  ( NM_FIRST - 81 ); // MButton Double-Click



struct NMLINKCTRL                                   // Link Control's Notification Object

{
    NMHDR m_hdr;                                    // Base NMHDR Object

    DWORD m_dwRetVal;                               // Return Value (Used by NMLC_ACTIVATE)

    DWORD m_dwFlags;                                // Message Flags

    POINT m_ptWhere;                                // Cursor Position (Screen)

};

All of these notification messages are handled using CWnd::OnNotify(...) or by using the ON_NOTIFY(...) message map macros.  The NMLINKCTRL structure is the NMHDR-based structure that is passed in the NMHDR pointer argument to the handler functions.

All of the Notification Messages support the following Flags.  The Flags are used to indicate which usual keyboard modifiers are down at the time that the message was sent.  The Right and Left-specific flags are only supported on platforms that can distinguish between them.  The last three Flags are Left/Right neutral, so when it doubt, use them:

const DWORD LCF_RCTRL        = 0x00000001;  // Right-CTRL Key Flag

const DWORD LCF_LCTRL        = 0x00000002;  // Left-CTRL Key Flag

const DWORD LCF_RSHIFT       = 0x00000004;  // Right-SHIFT Key Flag

const DWORD LCF_LSHIFT       = 0x00000008;  // Left-SHIFT Key Flag

const DWORD LCF_RALT         = 0x00000010;  // Right-ALT Key Flag

const DWORD LCF_LALT         = 0x00000020;  // Left-ALT Key Flag

const DWORD LCF_CTRL         = 0x00000040;  // The/A CTRL Key Flag

const DWORD LCF_SHIFT        = 0x00000080;  // The/A SHIFT Key Flag

const DWORD LCF_ALT          = 0x00000100;  // The/A ALT Key Flag

Next, let us look at the styles supported by the control:

const  DWORD  LCS_HOTTRACK   = 0x00000001;  // HotTracking Style

const  DWORD  LCS_DRAGDROP   = 0x00000002;  // Drag-N-Drop Style

const  DWORD  LCS_VISITED    = 0x00000004;  // Visited Style

const  DWORD  LCS_TOOLTIPS   = 0x00000010;  // ToolTips Style	

All of the style bits can be turned on or off at any time and will have a more-or-less immediate effect.

There are also other style bits in the header file that are prefixed with LCS_I_.  These are internally used style bits, and cannot be set/reset externally.

Now we come to the fun stuff... The public class members:

// Attributes

public:
void  SetTarget( LPCTSTR cpTarget );                // Set Target As A URL

void  SetTarget( const SHELLEXECUTEINFO &seiSEI );  // Set Target As SEI Information

void  SetDisplay( LPCTSTR cpDisplay );              // Set Display Text

void  SetToolTip( LPCTSTR cpToolTip );              // Set ToolTip Text, If Any

void  SetNormalFont( const LOGFONT &lfNormalFont ); // Set "Normal" Font

void  SetULFont( const LOGFONT &lfULFont );         // Set "Underline"/"HotTracked" Font

DWORD GetLastActivateError( void );                 // Return/Error Code From Last Activate



// Operations

public:
void  Activate( void );                             // Externally Activate The Link

DWORD ModifyLCStyle( DWORD dwRemove, DWORD dwAdd ); // Modify Control's Styles

void SetTarget( LPCTSTR cpTarget )
void SetTarget( const SHELLEXECUTEINFO &seiSEI )

These functions set the Target of the link or the "action to be taken place when the link is Activated".  The first version of the function takes a string in a URL format.  No validation is done on the string (this allows you to have your own internal format/actions).  The second version of the function takes a SHELLEXECUTEINFO object.  When the second version is used, the contents of the passed SHELLEXECUTEINFO object are passed the to ShellExecuteEx(...) function.  This allows you to have the link do just about anything you want when it is Activated.

void SetDisplay( LPCTSTR cpDisplay )

This function sets the Display string of the link.  This is the string that is shown to the user.

void SetToolTip( LPCTSTR cpDisplay )

This function sets the ToolTip for the link.

void SetNormalFont( const LOGFONT &lfNormalFont )

This function sets the "normal" font for the control.  The font can be changed at any time.

void SetULFont( const LOGFONT &lfULFont )

This function sets the "underline" font for the control.  The font can be changed at any time.

DWORD GetLastActivateError( void )

This function returns the error code (if any) from the last time the control was Activated.

void Activate( void )

This function gives the developer a way to externally Activate the link.

DWORD ModifyLCStyle( DWORD dwRemove, DWORD dwAdd )

This function allows the developer to modify the style bits of the control.  It is obviously modeled after a CWnd function of a similar name.

History

    Version 1.0    Initial public release to The Code Project. (~12/30/02)
    Version 1.1    Double-click bug fix and additional features. (~1/13/03)