|
I don
Anyway, to be really sure the control is visible you should obviously write
<pre>If (myControl.Visible = True) = True Then...
> so it doesn't effect performance
You mean "affect" (I hope)
|
|
|
|
|
And I ran this test once with "if mybool" and once with "if mybool = True".
No difference in speed. 1st one showed 33 seconds, 2nd one showed 32 seconds.
Module Module1
Sub Main()
Dim mytime As Date
Dim mybool As Boolean
Dim mydiff As TimeSpan
Dim j As Double
mytime = TimeOfDay()
While mytime = TimeOfDay()
End While
mybool = True
j = 0
For i = 1 To 100000
For j = 1 To 100000
If mybool = True Then
j = j + 1
End If
Next
Next
mydiff = TimeOfDay() - mytime
Console.WriteLine(mydiff)
Console.ReadKey()
End Sub
End Module
|
|
|
|
|
Had you taken a look at the disassembly, you would have discovered that the compiler generates exactly the same code in both cases. There is no real need for a test program.
"Dark the dark side is. Very dark..." - Yoda
--- "Shut up, Yoda, and just make yourself another toast." - Obi Wan Kenobi
|
|
|
|
|
Ummm...if you dissassemble something isn't there a program to disassemble? Ergo a test program?
I was simply providing an example that proves that this is not redundant code at all. The disassembly does confirm it though so thanks for that observation.
|
|
|
|
|
What I meant is, that when such a question arises, I simply write both lines in the application I'm working on and then look what I find in the disassembly. Why try to measure something that you can examine directly? As to the topic: I see that just as you do. It's not redundant and has no impact (in all languages I commonly use). A difference which makes no difference is no difference.
"Dark the dark side is. Very dark..." - Yoda
--- "Shut up, Yoda, and just make yourself another toast." - Obi Wan Kenobi
|
|
|
|
|
mdblack98 wrote:
Dim j As Double
...
j = 0
For j = 1 To 100000
...
j = j + 1
...
Next Ouch!
* Declaring a control variable as a Double
* Redundant initialisation of a variable immediately before using it as a control variable
* Doing integer arithmetic on a Double (in the For and in the assignment statements)
* Changing the control variable inside the loop
* Writing a Hall Of Shame contender in response to a Hall Of Shame entry. Priceless!
|
|
|
|
|
|
I actually sometimes check is some condition is not fulfilled even when there is else branch.
This I do in cases when one case of if/else block is expected behavior and in other one i do simple logging/recovery or similar thing.
Specifically, I do this when one block is short (less than 5 lines), and put that block in front. In that case, code is more clean to my eye because else block is very near to if block. This is very helpful to me when i have several nested if/else structures.
Would that make sense to anyone but me?
|
|
|
|
|
makes sense to me to have the preferred condition as the first block of code
if not WingsFallenOff then
FlyNormally
else
Panic
End if
|
|
|
|
|
How about:
try{
if (wingsFallenOff) {
throw new OutOfLiftError("Ahhhhhhhhhhh!!!!!");
}
flyNormally();
} catch (OutOfLiftError ex) {
panic(ex);
}
To be honest, rather then checking the boolean value, a method call, say checkAirworthy() , could be used that, if the plane is in the air, will throw an exception rather than returning false . Thta means that you can later upgrade it to check for engines, air-con and lemon-scented hand sanitisers. The same method would then be used before pushing back.
Panic, Chaos, Destruction. My work here is done.
Drink. Get drunk. Fall over - P O'H
OK, I will win to day or my name isn't Ethel Crudacre! - DD Ethel Crudacre
I cannot live by bread alone. Bacon and ketchup are needed as well. - Trollslayer
Have a bit more patience with newbies. Of course some of them act dumb - they're often *students*, for heaven's sake - Terry Pratchett
|
|
|
|
|
It may seem structurally sound, but it's a mistake to use exception handling for control flow.
First, exceptions are exactly that. Cases which you do not expect should happen in normal workflow, exceptional situations which are caused by a failure in the system. They should not be used to control business logic. However, I am also tempted to use them in this way when I have more than 2 layers of abstraction between business logic decision, and handling of that decision.
Second, it's big hit to performance. If this is not client side code, or a single occurrence during request processing, this can be real PITA when you come to a stage you need to optimize performance.
|
|
|
|
|
Nikola Radosavljevic wrote: exceptions are [...] Cases which you do not expect
So, you expect the wings to fall of the plane? Unless they're upgrading the TU-154[^] to fly-by-wire, I don't think it is /normal/ behaviour.
Panic, Chaos, Destruction. My work here is done.
Drink. Get drunk. Fall over - P O'H
OK, I will win to day or my name isn't Ethel Crudacre! - DD Ethel Crudacre
I cannot live by bread alone. Bacon and ketchup are needed as well. - Trollslayer
Have a bit more patience with newbies. Of course some of them act dumb - they're often *students*, for heaven's sake - Terry Pratchett
|
|
|
|
|
True. I didn't expect myself properly, but still. If user enters invalid PIN code, would you use exception to handle this situation? I'd argue you shouldn't.
|
|
|
|
|
The PIN case is different.
When a PIN is entered, it has to be authorised or declined. There is no exception in this.
If the software has used an invalid key for the encryption then THAT could be an exception, in general in is treated as decline.
Panic, Chaos, Destruction. My work here is done.
Drink. Get drunk. Fall over - P O'H
OK, I will win to day or my name isn't Ethel Crudacre! - DD Ethel Crudacre
I cannot live by bread alone. Bacon and ketchup are needed as well. - Trollslayer
Have a bit more patience with newbies. Of course some of them act dumb - they're often *students*, for heaven's sake - Terry Pratchett
|
|
|
|
|
PIN is more similar to usual business cases than wings falling off a plane
Anyhow, maybe I could make up a rule that would say:
Do not use exception handling if result of failed operation is displayed to end user, and end user is expected to understand it (there can be exceptions to this )
|
|
|
|
|
Completely agree with you there!
If the wings fall of an airplane in flight then that would certainly raise an exception.
However, the function Nagy made is a function that checks if the wings have fallen off. If someone would check something like that they are probably expecting that it could somehow have happened. The person checking it would probably want a true or false
"Co-pilot to first pilot, the wings have fallen off!"
"First pilot here, no sweat, we'll just use another plane for the coming flight"
It's an OO world.
|
|
|
|
|
Actually that does make sense to me.
I just don't usually have a lot of code in If blocks. If there is a lot of code I try to put it in different Methods so the If blocks always fit on my screen completely
Nested If's are a pain... If there are to many I once again make seperate Methods. If there are three, maybe four (absolute max) I try to keep the If's seperated by some comments that explain why there are so many if's and an empty line. Keeps code quite readable to my eyes
It's an OO world.
|
|
|
|
|
It's not redundant at all...it's explicit. And there's also a difference between "= True" and not leaving it empty. Any non-zero value is "True" but "True" is not any non-zero value.
There's no extra code generated as this is what is actually done when you leave off the "= True" part.
Given there's no difference in the generated code I fail to see your problem. Personally, I prefer explicit coding as you're much less likely to make a mistake.
How's this for redundant?
if (a==1) {
cout << "a=1" << endl;
}
Braces are completely redundant...but you'll never bite yourself by forgetting to put them in when you have to expand the clause in the future.
|
|
|
|
|
In C++, it's explicit. a bool variable can be zero or non-zero, making the check at least desirable.
In VB, or C#, or Java, it's unnecessary most of the time, since a bool can only have two values - and defaults to false instead of null.
|
|
|
|
|
Yes, but how will we know it's True unless we check?
It could be a half truth.
Psychosis at 10
Film at 11
Those who do not remember the past, are doomed to repeat it.
Those who do not remember the past, cannot build upon it.
|
|
|
|
|
Well, I use to resolve this kind of problem with a Ctrl+H, replacing '= True Then' by 'Then', simply.
I hate a dirty code....
Ygor Lazaro
|
|
|
|
|
Don't know about VB, but in C++ a boolean can sometimes have other values then true / false that would go through if you did something like this:
if(boolvalue){
}
but would do it correctly when doing this:
if(boolvalue == true){
}
V.
|
|
|
|
|
Agreed.
Anyway, writing
if(boolvalue == true){
}
is like saying "if boolvalue is true is true"
|
|
|
|
|
I confess that I tend to do this, but I do have a reason.
I program in multiple languages. Not explicitly calling out an equality in a dynamic and loosely typed language like Ruby can give you unexpected results. A variable will evaluate to true if it is true or has an assigned value (even if it's an empty string). It will evaluate to false if it is false or nil.
In the interest of clarity I tend to make logical tests explicit and let the compiler take care of things. Turbo C 1.5 optimized this way back when, so I'm sure VS2010 can handle it.
There's no harm in being explicit in one's source code. It's like using "extra" parentheses. It doesn't matter to the tools, but it sure does make reading the code easier for us humans. Not to say i don't appreciate obfuscated C, it's just I do't want to have to modify it and make it work.
|
|
|
|
|
In c# I prefer
if (((boolVar == true) == true) == true) {
I find that three levels is optimum
|
|
|
|