|
Some of them are pretty good - one of them does track well, and will send you an email / SMS estimating arrival time (to within an hour).
Others ... you'd thank that a company whose raison d'etre is logistics would be able to track stuff in real time, rather than calendar time1.
1 This was originally autocorrected to "Colander time" which seems strangely appropriate as well.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
OriginalGriff wrote: think "Son of Zeus" and you'll get it
I can thing 91...
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
|
OriginalGriff wrote: think "Son of Zeus" and you'll get it
Could be worse; at least you're not using "form of alpine singing that's deadly to Martians[^]"!
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I've not had any problem with them, as it happens: they're pretty good round here - if run rather ragged to get the deliveries done in time...
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
The issue is the process flow... The tracking number is generated at the point the package is packed and the encoded shipping label is created.... That triggers the notification (in the name of prompt notification to the customer)... The problem is that the new tracking number is NOT technically in the system until the package is scanned at the receiving shipping depot.
The reason apparently is that that they don't want their system cluttered with labels that go unused. To avoid this glut they only actually begin tracking at the point that the package enters the depot. While this assures that they are actually tracking live packages, the lag time between label creation and scanning at the depot creates a frustrating customer service situation.
Solution 1: Add a columns to the database tracking the label information that indicates the date/time stamp of when the label was created and when the label was scanned coming into the depot. Pair with this a method of truncating labels that don't show after a period of time as well as notify the customer of the failure of the package to arrive at a depot for scanning. Pair with a process to collect complete shipping label data from a package that shows up after the label had been truncated by the prior step.
There would be other possible ways to deal with this as well. One might be to modify the tracking system that you input your new label to track so that if the label isn't found in the database it would allow you to input it just the same and perhaps notify you of it being removed from tracking if the package wasn't scanned at the depot within a prescribed amount of time.
Regardless, your point is well taken that this is but one example of good technology being used badly. Critical analysis of the process would reveal a much improved delivery of serice to the information consumer.
|
|
|
|
|
Is that really how it works?
If you are looking at things from a different angle - as someone who wants to be able to expand the collection sites in your network with the minimum of fuss, no hardware, minimal interaction, what better way than to pre-print thousands(millions?) of cards with tracking numbers on them, the print function only ensuring uniqueness.
Then to bring a new location onboard, say a corner shop, deliver a box with a sign saying "Collection Point" & a wad of pre-printed cards, add them to the website & courier pick-up systems (should be the same thing) & Robert's your auntie's live in lover. Yes - people interested in data consistency may well discuss it in disparaging terms, but you'll still be making money!
The shops may well have a few spurious numbers cluttering up their shop, but not many as they ask the courier for more as they get short & the codes only enter the delivery system as they are used & that therefore is not cluttered up with unused codes.
Doesn't seem too bad when I look at it like that.
[edit] Then I remember that you can preprint the labels at home, stick them on the parcel, then take them into the shop, which blows a massive hole in the above thinking, but it took me a long time to type & I'd rather look a bit foolish than have the effort go to waste [/edit]
|
|
|
|
|
Stewart Judson wrote: I'd rather look a bit foolish than have the effort go to waste Your effort to to look foolish has not gone to waste.
There are two kinds of people in the world: those who can extrapolate from incomplete data.
There are only 10 types of people in the world, those who understand binary and those who don't.
|
|
|
|
|
Where's that upvote button when you need it
|
|
|
|
|
The "tracking #" can be generated at any time the "shipping label" is "created" (which requires a call to the carrier's "label" / postage service).
In the case of USPS, the shipper may contract a 3rd party postage service; which has to communicate with USPS on the client's behalf. The "discounter" in this case, are the extra "hops" that cause timing issues. Later on, the client may need to interact with USPS directly since the 3rd party may not offer all the "query" services (like "tracking"!).
Usually, there is at least one event (somewhere): Shipping label created.
BTW, tracking #'s are reused after a period of time (at least for some carriers).
"(I) am amazed to see myself here rather than there ... now rather than then".
― Blaise Pascal
modified 22-Jun-17 13:18pm.
|
|
|
|
|
I had a guitar stolen off of a UPS truck in transit from the factory to the depot. (I actually think it was someone in the depot but that is another story) But the tracking label tracked it half way to my home from factory then it show as not being scanned yet (according to the UPS agent investigating). They finally fessed up and said that it had been 'Stolen off the truck'.
The factory replaced it, and I got my guitar (how be it not the same guitar) but I still think this was an inside job.
|
|
|
|
|
If you look at the details, it probably says that the label was printed.
The package was not picked up yet.
On the other hand, I got one of these AFTER calling to complain my package was not here.
I screenshotted it with the date/time as PROOF they dropped the ball.
But they should be clear. That the label was generated, and they have no idea where the package is!
|
|
|
|
|
I was able to understand the tutorial after figuring out I need to look at the black and yellow sections at the same time. Otherwise I would have been lost if I didn't know php. Also a desc is needed to get to know what is used in the tables.. Also I needed to find table information. You could also explain table row and column information from the user database profile if a user doesn't know anything about database. This would help greatly! I would have also like the information as just file information. For example the index.php then the code display like this <?php echo the php code here which shows the php code disabled in textarea
<?php
echo "hello world!";
?>
</pre> just passing my
?>knowledge to you. Also you could of put downloads for each file used for your forum code and show it in text so people can copy it to a editor so it could be downloaded unless I missed it. You seem to assume people know how to use your tutorial and they can get confused. The code project is good except it assumes peoples knowledge too much of how to understand the php code project.
A file then he code will help instead. Since keeping all this stuff in memory is overwhelming!
Sincerely,
William Dunlap, The problem is people don't kiss stuff - keep it simple when coding! This make it easyier and makes it nicer to understand when programming industry and development.
|
|
|
|
|
Member 13266084 wrote: You seem to assume people know how to use your tutorial and they can get confused.
Who are you addressing this to?
If you have a problem with a particular article, you should use the forum at the bottom of the article to discuss it with the author.
The chances of the author randomly stumbling across your post here, and realising that it's about their article, are slim to none.
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I agree that w3school tutorials are not always clear and also it would be more helpful to have a possibility to try to solve a problem on each rule instead of just watching how the code act.
Cheers,
paper writer,
programmer
|
|
|
|
|
Yesterday, I got called onto a remote with a customer where some really crazy things are happening with one of our executables.
Starting this particular exe manually causes a command window to pop up and quickly disappear. The exe is deleted without any warning...just gone!
OK, so that's weird, but weirder still is the fact that when the exe is started from our main program, (normal) the main program gets shut down immediately and the main program executable gets deleted! In this case, the called exe is not deleted.
Some troubleshooting revealed that the same file renamed, would run without a problem.
It looks live an anti-virus problem, but the only a/v showing in the taskbar is windows MSE and I know that I don't have a problem with it. Also, I find it hard to believe that an a/v would rely on filename alone...besides, the same filename with 'test' appended works fine. (btw, the files in question are digitally signed...if that matters)
The customer's tech guy has no clue. Once he saw that it would work after renaming, he announced that his job was done.
To be continued...
"Go forth into the source" - Neal Morse
|
|
|
|
|
I've seen Norton do this on my wife's machine.
It can really be annoying and difficult to make Norton stop it.
I wrote an app for my wife and Norton deletes it every time you start it.
And, it's difficult to find the place in Norton to tell Norton that the exe is safe.
And, I've even marked it as safe and then Norton decided to delete it again.
Finally got it. But it's annoying.
|
|
|
|
|
Is it called "Program.exe"?
(Because most AV identify this name as a virus attempt and just delete it - it is due to the directory \Program Files\ having a space in the name and some dodgyness in the shell command IIRC)
|
|
|
|
|
Duncan Edwards Jones wrote: Is it called "Program.exe"?
No, but thanks. I'll have to try that some time.
"Go forth into the source" - Neal Morse
|
|
|
|
|
Maybe it's the new iOS feature that deletes apps when you are running low on space?
There are two kinds of people in the world: those who can extrapolate from incomplete data.
There are only 10 types of people in the world, those who understand binary and those who don't.
|
|
|
|
|
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
That doesn't sound familiar, but I've had Stored Procedures disappear from SQL Server before.
|
|
|
|
|
Beacause it will surely work a 100% the second time
SqlCommand cmd = new SqlCommand(query,conn);
SqlDataReader reader = null;
try
{
reader = cmd.ExecuteReader();
}
catch(InvalidOperationException e)
{
cmd = new SqlCommand(query,conn);
reader = cmd.ExecuteReader();
}
|
|
|
|
|
Really should be in a loop 42 times! 42 times always work out nicely!
|
|
|
|
|
What about a recursive method that runs until it works? That should "fix it"
|
|
|
|
|
Don't forget to put in an
Thread.Sleep(500) to give the database connection a chance to recover from the failure state.
|
|
|
|