|
Lout never can become one to offer services willingly (9)
@petepjksolutionscom - You are up tomorrow!
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
I know I volunteered 
In a closed society where everybody's guilty, the only crime is getting caught. In a world of thieves, the only final sin is stupidity. - Hunter S Thompson - RIP
|
|
|
|
|
I spent several days making my vector canvas able to "direct bind to a 'draw target'" if it happened to be a bitmap with a supported pixel format.
I did this by extracting the pointer to the bitmap and then doing the standard (y*stride) + x*(stride/width) on it to get my final pointer.
That sucks. For starters it only works with hard bitmaps. I can do better.
Enter gfx_span which is a little structure with a pointer and a length.
You can then do span(location).data and/or span(location).length off a bitmap to get a pointer and a length for the remainder of that row.
This is important, because it opens up the blt capability (direct read/write) to more than just bitmaps. For example, my UIX library the control surface draw target does a translation and clip before writing to the backing bitmap. Without span() I cannot get a raw pointer to the backing bitmap data. I must use methods off the draw target like point() and fill() which is generally much slower - all to do that translation and clip.
Unfortunately the existing code I've worked on for days will not survive this change. I have a lot of work in front of me, all because this span paradigm didn't occur to me on like, Monday.  Curse my brain.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
Looks like this site is now running like an electric fan whose power is turned off. The fan will rotate for some time under its own momentum, before coming to a stop.
Why I get this inference is that usually spam articles used to vanish after being reported by 5 users. However, now we see spam articles not vanishing even after 25 users report as spam. Looks like no daily maintenance of this site.
|
|
|
|
|
That's a one off case for that particular article. I reported in the Bugs&Suggestions forum.
Many articles reported after that were closed after 5 reports.
Edit: I think someone nuked it.
|
|
|
|
|
That was me.
Spam articles aren't fed to the automated system (because they legitimately contain so much stuff that in a message would be spam) so once the user is gone, his articles can be deleted with no effect on the rest of the system.
I think there is a timing bug that leaves spam articles in place if they get the fifth and sixth vote in close proximity - but it's pretty much impossible to track down in dev!
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
I don't know who came up with Lidocaine, but I'll have your babies. Spoiler, I don't have a uterus.
If there was ever a perfect example of defensive programming, I lived it today. You youngsters and oldsters pay attention. Your gun won't fire, the bad guy's chainsaw always works fine, and when you try to run, you will trip. 
So, my son and daughter have somehow achieved a wild hair. They want a fire pit in the backyard. Today, I am delivering small slate to the area. Shoveling complete, cleaning truck bed complete, daughter closes the lift gate to the truck. Now, I'm 65, so looking to the right and left of the bed - nah, not for me. So, I go to the back, flip my left leg over and step on the hitch...
sling right leg over toward the ground...
tailgate pops open.... this all compresses to 3 seconds. If you laugh, it's okay, but you owe me:
me: I'm in physics land. Fuc.....
daughter: Ohhhh fuc.......!
my head hitting the fire pit rock: fuc.....
my butt hitting more rock: where did you come from... My butt still hurts, I'll be posting images tomorrow 
I'm on the ground, scalp injuries bleed so there is blood runnin down my neck and face. No concussion but first words out of my mouth are "don;t call your mom!" she's on the phone with mom... fml.
3 female rants later, some lidocane and 6 staples to close up the 4cm hole in my head....
So teaching programming moment:
1) assume nothing
2) check your return values
3) see #1.
head is throbbing.
Oh, it gets better. Youngest daughter's wedding rehearsal is tomorrow.
Charlie Gilley
βMicrosoft is the virus..."
"the problem with socialism is that eventually you run out of other people's money"
|
|
|
|
|
Wordle 1,216 5/6*
β¬π¨π¨β¬π©
β¬π©π©π©π©
β¬π©π©π©π©
β¬π©π©π©π©
π©π©π©π©π©
|
|
|
|
|
Wordle 1,216 3/6
β¬π©π©π¨β¬
β¬π©π©β¬π©
π©π©π©π©π©
|
|
|
|
|
Wordle 1,216 5/6*
π¨β¬β¬β¬π©
β¬π¨π¨β¬π©
β¬π©β¬π¨π©
π¨π©π©β¬π©
π©π©π©π©π©
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Wordle 1,216 5/6
β¬β¬π¨β¬π©
β¬β¬β¬β¬β¬
π¨π¨β¬β¬π©
β¬π©β¬π¨π©
π©π©π©π©π©
In a closed society where everybody's guilty, the only crime is getting caught. In a world of thieves, the only final sin is stupidity. - Hunter S Thompson - RIP
|
|
|
|
|
Wordle 1,216 5/6
β¬π©β¬π¨β¬
β¬π©β¬β¬π©
β¬π©β¬π©π©
β¬π©π©π©π©
π©π©π©π©π©
|
|
|
|
|
Because you don't use social media, but you need to know this update (because you been griping about VStudio for so long (me too) ). 
Also, hopefully, it's not just Marketing, but it probably is... 
Quote:
Mads Kristensen
@mkristensen
It's humbling hearing all the positive feedback from the recent features and fixes we've put into Visual Studio. I know some of them were old feature requests that took a long time for us to act on.
On behalf of the VS team, thank you!
1:27 PM Β· Oct 16, 2024
Β·
2,463
Views
|
|
|
|
|
But then you read just a few replies....
Quote: Tick
@aleh_tiktack
Β·
2h
Is it possible to modernize UI ? I know that there a feature flag, but it changes maybe 20% of UI. So many white pages, progress bars in dark mode, outdated icons and so on?
Mads Kristensen
@mkristensen
Β·
2h
We're working on it. Huge task, but it's coming.
and...
Quote: Kirk Marple
@KirkMarple
Β·
2h
Please, please fix the βCode search freezes randomlyβ issue on the Dev Community forum.
Makes Code Search unusable on the current preview release.
Here's a good'un
Quote: Andreas U.
@MartyMcFly75
Β·
2h
Wh3n are you going to rework the "new" resource editor which never was production ready and is a total disaster. I wonder how that piece of intern quality code ever got greenlighted.
Wow, maybe I found my new job.
I'll read all the X.com posts & then post them here. 
|
|
|
|
|
When he says it's humbling, what he means is that it's humiliating hearing all of the complaints.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
staples... read my post.
Charlie Gilley
βMicrosoft is the virus..."
"the problem with socialism is that eventually you run out of other people's money"
|
|
|
|
|
Used to be a very important and popular job. They required a degree of trust and must be pretty skilled to connect so many calls. Yet direct dial made their job obsolete and historic. I bet if we went back in time, they were worried about what job they'll do next. Does that mean we shouldn't be able to just make a call on our own?
I wonder if we can draw any parallels between that and AI today. Hmmmmm. Just food for thought.
Jeremy Falcon
|
|
|
|
|
Technological advances always displace people's jobs and in theory creates new jobs, though not as many and often requiring significant retraining / new skills.
I tend to be less concerned with AI per se and more concerned with the robotization of lots of things (which, yes, AI plays a part in of course) and the droves of people that will be replaced, a significant number being in service industries.
We're not looking at / planning for the social shifts that will result.
|
|
|
|
|
Marc Clifton wrote: We're not looking at / planning for the social shifts that will result.
Tru dat buddy. And unfortunately, the masses will have to learn the hard way over and over again that change is coming.
People have always attempted to pass off "menial"* work onto others since like forever. Doubt human nature will change in our lifetime.
Say for instance, you know once robotics are cheap and advanced enough, everybody will want a robot maid like the Jetsons. Being a maid is a service but that will die out eventually too.
* I say menial in quotes because jobs like farming is one of the most honorable jobs out there. But even robots will replace some of that grunt work too.
Jeremy Falcon
modified 16hrs ago.
|
|
|
|
|
Marc Clifton wrote: We're not looking at / planning for the social shifts that will result.
I am trying, but people is really change resistant and ignore every prove or initiative that comes in other direction than expected.
I know because that's my current biggest frustration at work. I try to open new doors, but most of the people that should get through them, they just close it again and reforce it as it came a twister  
M.D.V. 
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
I think the parallel lies in the fact that switchboard operators were only employed until their jobs could be automated. That was just a matter of time and, I think, inevitable.
Some people are definitely in positions where their day-to-day tasks can be automated. It won't be pleasant for them, and probably not pleasant either for the people who would've used their services. Maybe that's the real impediment preventing it from having taken place already on a large scale.
But then there's also a whole category of people who could be replaced by machinery, where cost is the only thing getting in the way. I remember reading an article some years ago, I think involving McDonald's CEO, saying if he could replace people in their kitchens with a $30,000 machine, he'd do it in an instant. The fact that he came to an exact figure means he's already done the calculation and he's just waiting for it to become cheap enough.
Some people's days are numbered for sure.
I wouldn't want to be an unskilled kid quitting school today at the age of 18.
|
|
|
|
|
dandy72 wrote: I think the parallel lies in the fact that switchboard operators were only employed until their jobs could be automated. That was just a matter of time and, I think, inevitable.
Yuppers. Exactly.
dandy72 wrote: Some people are definitely in positions where their day-to-day tasks can be automated. It won't be pleasant for them, and probably not pleasant either for the people who would've used their services. Maybe that's the real impediment preventing it from having taken place already on a large scale.
Yup. I'd give industry examples of this, but everything is politicized these days. You're smart enough to some industries like this though.
dandy72 wrote: ut then there's also a whole category of people who could be replaced by machinery, where cost is the only thing getting in the way. I remember reading an article some years ago, I think involving McDonald's CEO, saying if he could replace people in their kitchens with a $30,000 machine, he'd do it in an instant. The fact that he came to an exact figure means he's already done the calculation and he's just waiting for it to become cheap enough.
Dude, that's already started. Dunno about the rest of the world, but there's already a fully automated McDonald's in Texas. They're already testing that out to see how it goes. Robotics definitely gonna be a thriving industry at least. 
dandy72 wrote: Some people's days are numbered for sure.
Yeah, that's just it though, it's not always bad even if it's scary. I'm sure there were skilled cave painters at one point, but I for one am glad we have houses and easels now. Just some people only learn just enough in the youth and then stop learning once they age, health declines, etc. Those who understand times change are the ones that survive.
dandy72 wrote: I wouldn't want to be an unskilled kid quitting school today at the age of 18.
Tru dat. For the short term at least, blue collar skills are making a resurgence since for the past couple decades nobody taught their kids how to fix a tire while watching cat videos online. I mean robots will eventually replace that too, but for the next 10-20 years at least you can do pretty well being a plumber, for instance. AI can't do that... yet.
Jeremy Falcon
|
|
|
|
|
Jeremy Falcon wrote: Dude, that's already started. Dunno about the rest of the world, but there's already a fully automated McDonald's in Texas.
I still have to see one
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
As silly as it may sound, I'm waiting to go see it with my brother. IMO it's totally cool. I realize times change, but robots are coming and it's not a bad thing as long as don't forget we're still human.
Anywho, you can view the inside of it via Google already: clickety and clickety . (SFW)
Edit: Actually, I stand corrected. According to dude on YouTube humans are still cooking the food... for now.
Jeremy Falcon
modified 7hrs 20mins ago.
|
|
|
|
|
Have you read the book, Linchpin: Are You Indispensible[^], (2008) by Seth Godin
By coincidence I am listening to it for the 11th time -- yes I'm serious.
I read this book twice and now I listen to it every year, at least once, since I first read it.
Here's a gem:
Linchpin: The difference between what an employee is paid and how much value she produces leads to profit. If the worker captures all the value in her salary, thereβs no profit.
As a result, capitalist profit-maximizing investors have long looked for a way to turn low-wage earners into high-value producers. Give someone who makes five dollars a day an efficient machine, a well-run assembly line, and a detailed manual, and you ought to be able to make five or twenty or a thousand times what you paid in labor.
The author is not saying this is a great idea.
He is saying it is "the way the system works".
And when a system works, the people are going to work the system.
People who understand that are going to "work the system" with AI.
Yes, it is too bad. It's why we all have to grow / get skills that AI cannot reproduce easily.
I understand you are one of those who thinks this too and who has skills.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
