|
If you want to code, but you can't take a screen shot using print screen or something you need to pack it in and find a different calling.
Maybe I'm being harsh.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
It might be that they are in a lab that doesn't have outside internet connectivity or has Reddit in particular blocked.
I do that wooden table sort of nonsense in similar situations where it's just easier to do that than to jump through all the hoops of shuttling a file from a PC/laptop to a cell phone (so as to use the cell's internet).
There are some apps that will cut/paste between cell and PC/laptop. Not always convenient/possible though.
My new favorite life hack for it is to start a draft gmail and attach the file and just leave it sitting like a temp drop box until I grab it from the other device(s).
|
|
|
|
|
Half the time there's a cat or something in the picture so you know they're taking it at home.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
Gary Wheeler wrote: I build UI's for our commercial inkjet printing systems.
I've never understood how someone so nice can work in such an industry.
|
|
|
|
|
Rage wrote: I've never understood how someone so nice
Thank you  .Rage wrote: can work in such an industry
I'm afraid the consumer inkjet industry copied our business model. We sell hardware (printing press plus the inkjet) more-or-less at cost, and then make earnings on ink and maintenance. It takes years of equipment sales, ink, and service on a product line to recoup development costs and to begin making a profit.
This has been How Things Are Done in commercial printing (not just inkjet) since Gutenberg  .
Software Zen: delete this;
|
|
|
|
|
Aside from the usual gripes about the over complicatedness of CSS from a usability standpoint, I have problems with it from an implementation standpoint.
CSS requires a DOM, just like JS does. With JS it's understandable. With CSS it's because they added a lot of more or less quasi-useful "convenience" features to their selectors.
If you could only do class and id based selectors your entire document could be parsed top-down, which is much more efficient than loading it all into RAM.
Why does it matter? Because embedded things exist, and HTML is so prevalent. If it wasn't for CSS a lot more devices could render a reasonable subset of HTML5.
I think they should at least come out with a standard like say eCSS (for embedded) that's a subset for forward only processing.
CSS is illustrative of what happens when you give a standards committee nothing better to do for decades.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
I think you are not the only one  
M.D.V. 
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
I have a love/hate relationship with CSS. I love what it enables me to do (layout and styling), but I hate having to google the selectors/syntax when it gets complicated...however there's certainly no shortage of references to anything you need to do.
As for html/css/javascript, I chose this combination recently to render scorecard style reports in a winforms project. Build a webpage bit by bit and throw it into a browser control...it takes me back to the late 90's when I was building webpages with classic asp! 
"Go forth into the source" - Neal Morse
"Hope is contagious"
|
|
|
|
|
I think really, just paring down a standard for things like embedded and formalizing the pared down "standard" for e-readers (it already sort of defines a subset depending on the format) it would open it up to a lot more hardware.
And frankly, it's so sprawling at this point that a cleaner, lighter version wouldn't hurt.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
I have a friend who was given a lighting console and was told that the previous owner thought the hard drive was on its way out. We're thinking about trying to replace the drive, the problem being, we need to copy over the OS as well, and there's a really good chance it's not Windows or Linux like most modern lighting desks; it's quite probably something custom. The other problem is this desk is officially obsolete, so the re-imaging kits that used to be available are no longer listed. We'll try to locate one, but not holding out much hope.
So here's the thing. The disk isn't very large (haven't checked but unlikely to be more than 250GB), so a replacement won't cost much, but I'm not sure what the best way would be to, essentially, do a "tape-to-tape" copy of the disk.
Any suggestions?
|
|
|
|
|
There are hard drive reimagers that literally take hard drives in two slots like they were bread in a toaster.
If you want something to produce an exact copy regardless of filesystem, it's a pretty safe bet, as long as your ailing drive survives.
Here's one[^]
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
Thanks, I hadn't come across those, and it's certainly an option. I have a SATA docking station, I wonder if there would be a way, with a second docking station, to effectively simulate what this does. Maybe a linux boot and a low level disk operator - does dd do this sort of thing?
Thanks for the pointer, anyway.
|
|
|
|
|
dd might work, but honestly, I'd pay for the hardware for peace of mind. It's so simple it does a sector copy. it doesn't care.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
Hiren's boot CD had several possibilities. If the disk is old I would recommend v10.1 or less. Those had the good'ol norton ghost low level version that started to fail at the end of Win7 or with big disks.
I remember an old software too called "Alcohol 120" (120% it burns all) that could do a verbatim copy of disks and drives.
There should actually be a lot of software out there that can cope with it. The only thing I think you should be careful is to do a copy of the whole original disk, if the new device is bigger you can still restore it as a disk and if you really think you need it, to reduce the disk to a partition later and use the extra place for something else.
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
Clonezilla live CD/USB works here. IIRC, it uses dd.
>64
It’s weird being the same age as old people. Live every day like it is your last; one day, it will be.
|
|
|
|
|
honey is dead on, and I've used for decades those devices. But....
I've used disk imagers for almost 20 years. Why? Well, backup systems used to work and then along came UEFI - a complete system abortion if there ever was one. So I want to imaging the drives. These devices do a physical sector by sector copy to a drive AT LEAST AS LARGE AS THE SOURCE. Copying from the source will not harm it. You might have to spend a bit to come up with a solution.
Context: I was (it appears I still am a consultant). I could not honestly charge my customer my time if I lost my hard drive - that's on me. So, typically two hours of downtime paid for all of the hardware. If you are just a consumer that bought something for $0, you might hesitate at buying stuff you will only use once. However, I have a great deal for you. I have both SATA and NVMe disk copiers sitting in my lab - email me, and I'm sure we can work something out. Your only expense would be shipping.
Charlie Gilley
“Microsoft is the virus..."
"the problem with socialism is that eventually you run out of other people's money"
|
|
|
|
|
Alister Morton wrote: Any suggestions?
As the old fool mentioned, just use a tool that does a sector-by-sector copy and you'll be fine. It won't try and translate anything.
The only caveat is you'll want to make sure your partitions are setup the same, specifically with sector sizing. But, I'd imagine most tools should handle that for you. If you're using dd directly though, just something to keep in mind.
Jeremy Falcon
|
|
|
|
|
Ring around, sounds like you are unpunctual, forwarded. (10)
|
|
|
|
|
Circulated ?
In a closed society where everybody's guilty, the only crime is getting caught. In a world of thieves, the only final sin is stupidity. - Hunter S Thompson - RIP
modified 9hrs 5mins ago.
|
|
|
|
|
That is a pretty good guess.
Does "around" mean "sounds like" ? I thought it was a clue that the text is within the word, like Cir-something-cle.
modified 9hrs 20mins ago.
|
|
|
|
|
|
Sounds like you are unpunctual = u late
|
|
|
|
|
This part was clear. I understood so far the word "around" as : the word along with it would be cut in syllables which would be put "around" the rest of the clue. So in this case "ring around" = "Circle around" = "Cir - rest of the clue - cle". In this case however, "around" means "sounds like". Which I did not expect.
Not only does explaining it break the charm, but it seems that I cannot even bring it to my point.  Silly me  !
|
|
|
|
|
You are absolutely correct in your logic - there was a mistake in the clue
In a closed society where everybody's guilty, the only crime is getting caught. In a world of thieves, the only final sin is stupidity. - Hunter S Thompson - RIP
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
