|
If your computer is a member of a domain, it will be synchronised to a domain controller. You should ensure that your domain controllers are synchronized with an external time source. See the w32tm tool for how to configure this.
You can override this on the workstation, but it's better to get the domain time correct.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Windows checks the system RTC at startup, then maintains its own time programmatically. Over a period of time it loses accuracy, as the process is occasionally interrupted, and update cycles missed, when other processes with higher priority are running. The busier the machine, the quicker the errors pile up.
Synchronizing the machine to a time server is a good solution, so long as the time source isn't also busy. I use an Internet time server to keep the local server sync'd, then rely on WinXP's built in time client service to keep the clients on the same time as the local server. Check out this[^] site for information about using the US NIST servers as a time source. WTime32 is the process that handles the NTP service in Windows - you can find info at MS' site for setting it properly, though I believe that the above article includes detailed instructions.
Another possibility, of course, is that the RTC on the motherboard is off, but I can't think of a way for that to happen. Crystal oscillators just don't slow down over time, and I can't think of a failure mode on the motherboard that could lead to a slow down. It either works, or it doesn't, for any scenario I can imagine.. Well, there is one unlikely case, but that would make it go faster.
Boredom, Bull$^%&, Baggage, Bar - all start with 'B' Coincidence?
|
|
|
|
|
I am San
my problem is when I browse on Net a message shows like this " Internet Explorer caused an error"
What it means?
san4wish likes it.
|
|
|
|
|
san4wish@hotmail.com wrote:
my problem is when I browse on Net a message shows like this " Internet Explorer caused an error"
Can you tell me, what is the version of your windows operating system and the version of your internet explorer? On the other hand try to check this resource[^] for further information or use google website to find the information.
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
I am using win98se and IE6 version.
|
|
|
|
|
Hello everybody, i have a simple questions i think, but i don't know the answers:
Before all, i have to say that i have create a andministrator and an limited user account.
But my questions are about how i can integrity my application without the limited user account can stop it, but here i have my 2 questions:
1) If we add a shortcut to the Start Menu | Programs | Start Up of our application but in the administrator account. It will starts to work if for example we log in in the WXP with the limited account. And if it starts to run, we can prohibite to the limitate account to don't stop the application?
2) If we add a entry in the registry to start our application, how we can stop to the user to don't delete this entry in the registry?
Thank u for the possible help.
|
|
|
|
|
densitet wrote: 1) If we add a shortcut to the Start Menu | Programs | Start Up of our application but in the administrator account. It will starts to work if for example we log in in the WXP with the limited account. And if it starts to run, we can prohibite to the limitate account to don't stop the application?
I don't understand this question. Could you explain more detail about your question?
densitet wrote: 2) If we add a entry in the registry to start our application, how we can stop to the user to don't delete this entry in the registry?
Use the group policies to configure the policies Prevent access to registry editing tools setting.
|
|
|
|
|
I'm developing an application in VB.Net wich will perform the same function as DELPROF.EXE tool from microsoft does, except you will be able to select multiple computers from your Active Directory Domain to run it on, as well as pick an age cutoff.
Problem I am having is with deleting the profile directories. All of the commands I use to delete the folders error out because they are read only. I use a function to cycle through the directory and turn off the read only and hidden attributes then attempt to delete the fld and it erros out. Any suggestions would be greatly appreciated.
Eagle Keeper
Memory is the second thing to go with age.........
But for the life of me I can't remember the first thing......
|
|
|
|
|
Eagle_Keeper wrote: All of the commands I use to delete the folders error out because they are read only
Make sure whether your application run under the user account which belong to a group that has sufficient right to delete the user profile.
|
|
|
|
|
Friends,
I've been playing too much with COM/ActiveX control these days. I create temporary projects and then delete them. But these programs left their signs in the registry. I create DLL and delete it but its entry in the registry remains there. As such my registry is badly polluted.
I am in search of free tool that can delete all those COM/OLE enteries from the registry which have no DLLs left. Please suggest me any ?
Imtiaz
|
|
|
|
|
|
Hi there,
I have an exe file which is compiled by an old Fortran compiler.
now this file doesn't run under WinXP.
how can I solve this problem?
by the way the source code of this exe file is not available.
Thank you in advance.
|
|
|
|
|
Try setting the Compatibility Mode for the program to something older, like Win3.1. I don't recall offhand where to find it, but it's a new feature of WinXP that allows you to force older programs to run in an environment that emulates older operating systems. Win3.1 was really a shell running on DOS (as was Win9x), so it should behave similarly. I'm sure you can find it using online Help.
"If it's Snowbird season, why can't we shoot them?" - Overheard in a bar in Bullhead City
|
|
|
|
|
It was actually a Win2K feature - right-click the EXE->Properties->Compatibility. I don't know if this will affect DOS apps, but it's worth a try.
--Mike--
Visual C++ MVP
LINKS~! Ericahist | 1ClickPicGrabber | CP SearchBar v2.0.2 | C++ Forum FAQ
Strange things are afoot at the U+004B U+20DD
|
|
|
|
|
Michael Dunn wrote:
It was actually a Win2K feature
I've been running Win2K since beta3 and never even noticed. Sheesh!
"If it's Snowbird season, why can't we shoot them?" - Overheard in a bar in Bullhead City
|
|
|
|
|
hiii
how can i design simple task
manager with vb6 and windows api
thank for all
|
|
|
|
|
You have to learn to write code!
|
|
|
|
|
How can i secure my binary files from being edited/corrupted by unauthorized persons?
|
|
|
|
|
http://www.pcworld.com/howto/article/0,aid,110663,00.asp
|
|
|
|
|
How can i secure my binary files from being edited/corrupted by unauthorized persons?
Reply:
edited means that it is done for *some* purpose. Corrupted implies that it was a machine failure.
Backup files in a secure medium of the main server is the first step. 2nd step would be to encrypt the files after *you* have edited them with a passcode. There are many tools to do this part. 3rd thing is to have a Source Code control mechanisim to Verify and authenticate the changes.
Ie version 1 begets child document 1.1 that then gets Child document 1.1.1, and so on until you get to the level of changes you want.
Change a whole paragraph, now you are at document level 1.2 etc.
Revise the Document 3 chapters at a time, Now the version is 2.0.0 etc.
Its a matter of how much effort you wish to do now , as opposed to how much effort you want to do later.
An example of a windows tool to use is WinZip, use it Zip the files to Hard drive in the directory , and turn 128 bit encryption on. then save the files to the server.(remember your password & Dont write it down. REMEMBER it. Try a few sample ones you may dream up. write them down on a post it not in your journal. Don't look at the note for 1 month. See how many you remeber after 30 days? this telly you how good your memory is, now think how hard it will be if you forget a file and dont remember the password for 12 months.
what a pain. Remember. it all depends on how much work you want to do now as opposed to later, (possibly when you forget what the password was).
The Happy Wanderer
|
|
|
|
|
hi,
I want to enumeratie all the users and groups of my xp. I solved this by using ADSI (Winnt://).
Here is my question:
What underlying local system does the ADSI WinNT Provider use to enumerate all the users and groups as I do not have a directory service somewhere?
I looked through LSA but could not find anything here. NetLan Management just returns the public accounts but not the build-in accounts.
Thanks for any help.
nick
|
|
|
|
|
Hi,
Anybody knows about software modems. Or any helpful links to know about?
Actually my objective is to test the (already present)software modem in
my system. Diagnostics purpose.
Thanks
Tom
|
|
|
|
|
TOMCAT81 wrote: Anybody knows about software modems. Or any helpful links to know about?
What do you want to know from here? What do you mean by software modem? You mean a driver of the modem? I don't understand about your question. If possible, please explain more detail about your question again.
|
|
|
|
|
3 times in the last 2 months, I've had problems with the data on my main hard drive becoming partially corrupt.
The first time it happened, the computer froze up totally, with the hard drive light on steady. I reset the computer, and when it started up again, I got a BSOD, with the error being "UNMOUNTABLE_BOOT_DEVICE". I booted from my PEBuilder CD and tried to access the drive, and I got an "Error while performing InPage operation" error, and the drive's contents would not show up. I put the drive in another computer, and ran CHKDSK on it, and it found a number of corrupt folder and file entries, which it repaired. I could boot from the drive after that, but I decided to get another drive and copy the contents over to it rather than risking further problems with the original drive. I also replaced the IDE cable.
It worked for a little while, but then a few weeks later, there was a BSOD, with a "IRQL_LESS_OR_EQUAL" error (IIRC), and when the computer rebooted, CHKDSK found corrupt file system entries again. The system booted correctly, but I decided to replace the mainboard to see if that was the problem, as I'd been seeing "IDE1 no 80-conductor cable detected" even though there was indeed an 80-conductor cable, so I figured something might be wrong there. Did a repair install of Windows so that the drivers would be re-detected.
Since the first time it happened, I've been getting various BSODs from device drivers - FASTFAT.SYS, NDIS.SYS, etc. (I have pictures of several of them if that would help). Then today, my computer rebooted itself while I was out (probably after another BSOD), and a whole bunch of invalid indexes were corrected, and a bunch of orphaned files were recovered. The computer booted, but many programs cannot load DLLs (they have "Bad Image" errors), and I can't launch any programs via shortcuts, the Run menu, or Explorer - only programs that are set to start via the registry start up. Task Manager doesn't work, I can't open the Event Viewer snap-in, etc.
I'd say there's nothing for it but to reinstall Windows completely. But the reason why I've written this post is that I worry that there may still be some hardware issue that's causing this (power supply? RAM?). So my question is, is this likely to be caused merely by a corrupt Windows installation, or should I suspect a hardware problem?
Here's some info on my system that may be helpful:
Power issues:
Have surge suppressor
Another computer that is on the same surge suppressor does not have any of these problems
Mainboard/CPU specs:
Althon XP 2000+ on Gigabyte 2004RZ mainboard, formerly on ECS EliteGroup K7VTA
Normal operating temps: Sys: 31C/87F, CPU: 50C/112F
RAM:
Kingston DDR @166MHZ
2 256MB modules
memtest run through 6 passes, reports no errors
PSU:
300W
came with case ( = good chance it's shoddy?)
BIOS voltage monitor reports correct voltages
Thanks so much in advance for any help!
"A people that values its privileges above its principles soon loses both." -- Dwight D. Eisenhower
|
|
|
|
|
I would have said RAM faults, but memtest passes it. You could try Microsoft's Windows Memory Diagnostic[^].
Check that your hard drive cables are seated correctly and aren't damaged. Ensure that you're using the right sort of cable - I'd now recommend that all IDE/parallel-ATA cables are of the 80-way type. Saving a few pennies on 40-way cables is a false economy, IMO.
Since you had an 80-way cable that wasn't being detected, it's quite possible that the data on the disk has become corrupted. In that case you probably will need to reinstall.
If any component is overclocked, revert it to its correct clock speed. See Raymond Chen's post on overclocking[^] for details on the problems this can cause. If your new motherboard has 'dynamic overclocking' features turn them off.
Problems could also be caused by either faulty drivers or faulty add-in hardware. Remove every non-essential card and connected device, and see if the problems go away. If they do, add devices one at a time until the problem resurfaces. Look for an updated driver for the device you added last, or replace the device.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|