|
Hi,
Thanks for your input. It redirected me back to my initial approach (before I got distracted with crystl32.exe which turnout to be for version 4.6 -too old). I looked for the Runtime File Requirements doco that came with Seagate CR 7 which I installed in my dev machine. I included in my installation every dll that I seemed relevant. In the end I still had the error message "cannot find pdsoledb.dll". I could not find this file anywhere in my machine (with Crystal Rep 7 completedly installed).
This takes me back to the background of my implementation.
My .net application is running a legacy VB app that calls and print crystal rep on screen. I did not write the legacy app it was just handed to us.
MAYBE, the legacy vb code was using a version of crystal different from the only I have installed in my machine (version 7). Would this explain why i cant find pdsoledb.dll in my machine? AND it is not mentioned in the Runtime File Req. doco.
If so, I have to track down the person who can tell me the crystal rep version I need to install.
Am I on the right track here??? I'm getting quite dizzy running in circles. HELP.
Ahrvie
Ahrvie
|
|
|
|
|
A quick search on google tells me that pdsoledb.dll is a library for an OLE DB driver. I would therefore hazzard a guess that it is not a part of crystal reports
Steve Jowett
-------------------------
Sometimes a man who deserves to be looked down upon because he is a fool, is only despised only because he is an 'I.T. Consultant'
|
|
|
|
|
Hi Steve,
The weird thing is,installing Crystal Rep 7 gets rid of this message. However, the pdsoledb.dll is not installed with CRep 7.
I am getting really confused now.
I really appreciate your time and effort, Steve.
Ahrvie
Ahrvie
|
|
|
|
|
I am thinking CR7 is quite an old version. It may be the pdsoledb.dll is a file installed with Windows 98 or 2000 and has been superceded by something else in WinXP. Have you got a Win98 and 2000 PC you can check?
Steve Jowett
-------------------------
Sometimes a man who deserves to be looked down upon because he is a fool, is only despised only because he is an 'I.T. Consultant'
|
|
|
|
|
Steve,
I installed the applicated in boxes with Windows 2000 with SP4 and Windows Server 2003 sp1 and got the same problem. I searched for the file in both machines and the closest I can find is pds.dll.
How/where can I check to find out which is referencing this dll?
Thanks very much for the time and effort you're giving.
I really appreciate it.
ahrvie
Ahrvie
|
|
|
|
|
IT appears that pdsoledb.dll was replaced with p2soledb.dll in CR v8. Does this file exist on your PC?
Steve Jowett
-------------------------
Sometimes a man who deserves to be looked down upon because he is a fool, is only despised only because he is an 'I.T. Consultant'
|
|
|
|
|
Steve,
I need to get back to you on that next week as I am away from the test beds due to a training I have to attend.
Appreciate your help.
Thanks,
Ahrvie
Ahrvie
|
|
|
|
|
I am coding a program which i would like to send strings of words to Internet explorer and i've played around with the sendkeys function built into .net but with no success
i've read a few articles about using keybd_event and user32.dll however I haven't had any success with that either...
i was looking for either some helping words to guide me in the right direction... i can get the sendkeys function to output to programs like notepad, however, it does not work to internet explorer (note: i'm not tryin to type into a textbox in IE)...
as far as the keybd_event i'm not exactly sure how to call to the user32.dll and then use that to output to IE..
i really feel like this should be simpler thatn what i'm making it, but really any advice would be really appreciated! Thanks!
|
|
|
|
|
gatorlaid wrote: (note: i'm not tryin to type into a textbox in IE)...
Where are you hoping for the text to go then ? Sounds like the problem is one of focus in IE, the right place doesn't have input focus when you send the key strokes.
gatorlaid wrote: as far as the keybd_event i'm not exactly sure how to call to the user32.dll and then use that to output to IE..
www.pinvoke.net is the place for info on calling native APIs
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
Christian Graus wrote: Where are you hoping for the text to go then ? Sounds like the problem is one of focus in IE, the right place doesn't have input focus when you send the key strokes.
I've actually able to get focus to the IE window, but for some reason the Sendkeys function must not actually simulate keystrokes... i'm sending the string to the window in general, the text does not actually show up anywhere... this is why i simply need to simulate the actual keys being pressed
thanks for the site tho! i'm definitely looking into it further
|
|
|
|
|
These are two questions posed by my profesor..........how can this be done?
1. The table below gives the 2002 and 2003 sales for the five top restaurant chains.
a. Place the data into an array.
b. Calculate and display the table and the yearly change in sales for each restaurant.
2002 Sales 2003 Sales (in millions)
McDonalds 20.3 22.1
Burger King 8.7 7.9
Wendys 7.1 7.5
Subway 5.2 5.7
Taco Bell 5.2 5.3
2. The scores for the top three golfers at the 2005 Buick Invitational are shown in the table
below.
a. Place the data into an array.
b. Compute the total score for each player.
c. Compute the average score for each round.
Display the original data and the computed data.
Round 1 Round 2 Round 3 Round 4
Tiger Woods 69 63 72 68
Luke Donald 68 67 67 73
Bernhard Langer 69 69 67 72
Thanks for any help that can be provided
|
|
|
|
|
ualr wrote: These are two questions posed by my profesor..........
Then it's homework. How do YOU think it should be done ? Do you know what an array is ? What do you know about working with arrays ?
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
Hi!
In my current windows form. i have a button to generate a powerpoint which uses a standard one slided powerpoint template and the data is fed in and power point is generated. now i want to divide the each row of records returned into two seperate slides (1 slide template is changed in 2) so my code is sumthing like
for each database.rowcount
write to ppt slide for each record
next
but no record is going to 2nd ppt slide for each row how could i use a loop in it so that each row goes into both ppt templates and go on loop
please help
-- modified at 23:45 Wednesday 4th April, 2007
|
|
|
|
|
|
Hi to all,
1.can I create a formulas for columns like in excel
2.can I navigate through a row by pressing enter key
|
|
|
|
|
1 - no, not without writing the code yourself. It's not Excel, it's a grid
2 - sure, just write the code to handle the keypress and change the selection.
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
I am trying to simulate the Microsoft Excel "Freeze Panes" function on a Visual Basic .NET form using two ListView controls.
Key_ListView: The control on the left will have one column entitled "Key" and have a numerical value.
Data_ListView: The control on the right will have about 30 columns. The 30 columns can't fit onto the screen at the same time. The user has to use the horizontal scroll bar to see the columns out of view.
When the user scrolls the Data_ListView to the right (horizontal scroll bar) they will not lose "sight" of the key value in the Key_ListView. This is the functionality my users demand.
When the user scrolls the Data_ListView Up and Down (vertical scroll bar) I want the Key_ListView to scroll Up and Down as well. I want the records to stay in sync with each other in a vertical nature.
Using the .EnsureVisible property doesn't set the scroll position; it just makes sure the specific item is "somewhere" in the client window.
Thanks in advance for your help.
|
|
|
|
|
i want to make any application executing just once at the same time ..
i mean that when i run my application exe file it's opened and if i double clicked the exe file again it runs again..
how can i prevent that ?
pleas help
regards
|
|
|
|
|
Goto your project's properties and check Make Single Instance Application .
Trinity: Neo... nobody has ever done this before.
Neo: That's why it's going to work.
|
|
|
|
|
i use VB.net 2003 , there's no option like you wrote in project properties
many thanks for attention
regards
|
|
|
|
|
|
thanks Ben too much , but is there any way short than all that code ?
regards
|
|
|
|
|
You can leave out the windows message part since that is only used to activate the application if it is already running. All you have to do is use the mutex to know if your application is already running.
Ben
|
|
|
|
|
hi buddy...
if you are working in VB try this...
Private Sub Form_Load()
If App.PrevInstance = True Then
MsgBox "application already running", _
vbInformation, "Message"
End
End If
End Sub
|
|
|
|
|
i have tried internet for it,,, but of no use
please if can then just give the code for it
""""""""""i m using currencymanager,, the radio button does not change when at run time i navigate my records"""""""""
the default button that i checked always remain checked
please help
|
|
|
|