|
I was in the process of coming up with a similar response when I saw Michaels reply, so I jumped into VC to give it a try, and the following
#include <iostream.h>
class MyClass
{
public:
MyClass() {cout << "Initialize\n";};
~MyClass() {cout << "Clean up\n";};
};
MyClass myClass = MyClass();
int main()
{
cout << "Hello, World\n";
return 0;
}
worked fine for me. I don't believe myClass needs to be defined, but I left it that way ;0)
Christian
The content of this post is not necessarily the opinion of my yadda yadda yadda.
To understand recursion, we must first understand recursion.
|
|
|
|
|
I was in the process of coming up with a similar response when I saw Michaels reply, so I jumped into VC to give it a try, and the following
#include <iostream.h>
class MyClass
{
public:
MyClass() {cout << "Initialize\n";};
~MyClass() {cout << "Clean up\n";};
};
MyClass myClass = MyClass();
int main()
{
cout << "Hello, World\n";
return 0;
}
worked fine for me. I don't believe myClass needs to be defined, but I left it that way ;0) I noticed you had a .cpp file for MyClass, but it did not include MyClass.h ??
Christian
The content of this post is not necessarily the opinion of my yadda yadda yadda.
To understand recursion, we must first understand recursion.
|
|
|
|
|
It does have an include, I just didn't paste it it. I copied your example exactly, added the missing include for iostream, and compiled. I came across something quit odd.
When I compile the app using:
#include <iostream>
using namespace std;
The destructor for myClass is never executed.
However, when I use:
#include <iostream.h>
with the namespace line removed, the destructor fires.
Anyone have a clue as to why?
MCSD, MCSE
|
|
|
|
|
Funny enough, I couldn't get a compile at all using namespace std, so I took it out. I have a question. Of what use is
#include
by itself ?
Christian
The content of this post is not necessarily the opinion of my yadda yadda yadda.
To understand recursion, we must first understand recursion.
|
|
|
|
|
#include (according to the strict definition) causes the preprocessor to insert the named file where the #include directive is found as if it were typed there by the coder
my thoughts:
if the name following the directive is blank the preporcessor will either ignore the directive (smart move) or try to include the filename "" (dumb move as this would cause an error file-not-found) ... so actually i guess it ignores the directive
heh
---
"every year we invent better idiot proof systems and every year they invent better idiots"
|
|
|
|
|
That's about what I thought it would do, it appears the iostream include ( which I put in myself ) was actually what that line did in the original posters code...
Christian
The content of this post is not necessarily the opinion of my yadda yadda yadda.
To understand recursion, we must first understand recursion.
|
|
|
|
|
Nothing.. I had <iostream> after the #include. However, I wasn't using the HTML escape sequence for < and > like I am now so <iostream> is being interpreted as an HTML tag and not being displayed. Actually, codeproject is removing them. It occured in your posts also. Use & lt; for < and & gt; for >. Be sure to remove the space between the & and the other characters.
Also, to use using namespace std, you have to remove the .h from iostream. Don't know why but that is how it works for me.
MCSD, MCSE
|
|
|
|
|
I see, it all becomes clear ;0)
When you #include between <> instead of quotes, you are telling the compiler to load from the standard library as opposed to a header from elsewhere, it doesn't do a search for the file elsewhere ( at least that's from memory, my copy of Stroustrup is at work and I am not )
Christian
The content of this post is not necessarily the opinion of my yadda yadda yadda.
To understand recursion, we must first understand recursion.
|
|
|
|
|
Hey everybody,
I need to redirect the output of a console app to a listbox on a dialog.
I've been trying to do this for a while, to no avail. Its becoming a pain in the ass...
Anyways, what I've done is customize my console app's STARTUPINFO struct to redirect STDOUT to a handle that I specify as well as hide the console window.
The standard ouput is redirected to into a char* buffer that I read from to provide entries into the cells of a listbox on a dialog.
I use CreateProcess to run the console app with the specified STARTUPINFO structure.
In particular, I'm trying to run gzip.exe.
The console app runs fine. Its output is displayed in the console window but it is not in the list box as it should be.
This is the first time I've had to use CreateProcess directly. I've gone through my code and MSDN again and again but I'm still missing something.
Can anyone provide any insight into this situation.
Thanks,
Josh
josh@schroff.com
|
|
|
|
|
Greetings Programs,
I've run into an odd problem and I was looking for some advice.
The following line is from an application I am building:
hFind = FindFirstFile(strcat(cQueueDupe, "\\*.*"), &findData);
Initially I build the application to run as a console app but have decided to expand it into and Windows Service app. As a console application any path I give it will is fine as long as it is valid. Local disks, mounted volumes or UNC paths. Doesn't matter. However, after implimenting the same code as a service (and starting it as a seperate thread from the service thread) the FindFirstFile statement fails for anything that isn't a local disk. At first I thought perhaps I was sloppy in my thread implimentation and removed it but to no avail.
I must admit that I am absolutely at my wits end over this. Hopefully one of you fine persons can show me the error of my ways.
Many thanks,
Rhoam
|
|
|
|
|
FindFirstFile statement fails for anything that isn't a local disk.
That happens because the service is not running under your account, so it doesn't have access to your mapped drives. You'll need to go to the service's properties and set it to log in as you.
--Mike--
http://home.inreach.com/mdunn/
I'm finger-lickin' good!
|
|
|
|
|
OhMyDearGodHowStupidCanIPossiblyBe!
Michael, thank you so much for that. I cannot beleive that such an obvious and common element was completely overlooked in my debugging.
This is by far the dumbest thing I have ever done. Well, except maybe the time I was really drunk and the monkey...
Thanks again,
Rhoam
|
|
|
|
|
|
Hi,
I have a problem I can't figure out. I'm getting KeyUp() and KeyDown() events but I'm not getting an OnChar() Event.
Any ideas or recommendations would be greatly appreciated.
Thanks,
Chris Simeone
|
|
|
|
|
i could never figure that out either. so, i just found another way:
BOOL CAboutDlg::PreTranslateMessage(MSG* pMsg)
{
if (pMsg->message == WM_KEYDOWN)
{
char c = toupper(pMsg->wParam);
if (c == 'C')
.....
return TRUE;
}
return CBaseClass::PreTranslateMessage(pMsg);
}
there may be a more 'correct' way to do it, but this works fine.
-c
------------------------------
Smaller Animals Software, Inc.
http://www.smalleranimals.com
|
|
|
|
|
You don't give enough information.
First, what keys are you trying to capture? Some keys will never show up in KeyDown.
Second, what kind of window is it? Dialog? Child? Top level?
There are many things which can cause this.
|
|
|
|
|
When I make a CreateCompatibleBitmap whith the CDC of the Preview Printing and a big Bitmap, the CreateCompatibleBitmap return FALSE. But if I create a compatible DC and I CreateCompatibleBitmap with this DC, that's working 
Any idea to explain this.
Sincèrement
Best Regards
Eric ~ Le Souricier Gris <°@_/
http://lesouriciergris.free.fr
http://lesouriciergris.developpez.com
|
|
|
|
|
How can I create an empty COleSafeArray? Thanks
|
|
|
|
|
Programming in MFC C++ using ASyncSocket to derive from. Having problems on close down / class destruction when socket object is created on a seperate thread. Throws up an exception from CAsyncSocket.close() apparently the socket no longer exists but it still determined to close it?
Any Ideas??!!
|
|
|
|
|
Well, when using sockets in another thread, you have to call Detach() from the thread that created it, and Attach() in the thread you will use it. Likewise, when a socket is destroyed, you have to call Detach() and Attach() to make sure that the socket is "owned" by the thread which is trying to destroy it.
|
|
|
|
|
the app i'm developing has to send messages via either fax or smtp mail and i always thought that exchange would route messages correctly if i prefix the address fields with FAX: or SMTP:
on my dev machine i have outlook 2000 as a mapi client but it doesn't seem to do any address filtering, ie, a message addressed to FAX:lauren@fakefur.co.za got bounced back from my isp mail server (not surprisingly) as undeliverable
question is will exchange (with say right fax installed) route them properly ... and if they don't have exchange (only outlook 2000 say) do i have to disable faxing and use only the raw addressing for smtp?
hmmmm ... maybe this isnt explained well but it kinda says what i mean i think ... help appreciated
---
"every year we invent better idiot proof systems and every year they invent better idiots"
|
|
|
|
|
and another question is what is the best way to see if exchange is installed on the network and is used for messaging?
sheesh
i used to think games coding was tough :/
---
"every year we invent better idiot proof systems and every year they invent better idiots"
|
|
|
|
|
Hello,
I'd like to program an app that determines some information about
a mp3-file.
I already have a routine that can read out the id3-tag. Now i'd like to get out what bitrate, length (in seconds), # of channels (mono/stereo) and frequency the file has. Can anyone help me?
thanks in advance
|
|
|
|
|
|
(May be somebody know).
How I can do than than the one object containers anonther object (by value or by referen) and
second object don't know the first object.
I mean:
class Head
{
};
class Man //see there--> Head --------<> Man //or Head <-------<>Man
{
protected:
Head m_head;
};
Where (step by step) i must pressed (in rational rose UI) for it.
I tried do it but it's generated next:
class Head
{
protected:
Man man; //<-- i do not want it
};
class Man
{
protected:
Head head;
};
//and sometimes was genereted more strange text..
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
