|
Note: Windows 2000 Professional and Windows XP will only allow you to host a single web-site. You will a second web-site to do what you want, which means you will have to use Windows Server 2000 or 2003.
- Add a host file entry "123.123.0.1 bla.abc.com"; In DNS, this would be a new CNAME record for the domain abc.com;
- Add a new web-site in IIS, and point it to the "bla" directory;
- In the properties of the new site, click the "Advanced" button in the "Web Site Identification" section;
- Highlight the entry in the top list, and click "Edit";
- In the "Host Header Name" box, enter "bla.abc.com";
- Click "OK" three times;
- Start the new web-site;
"These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer
|
|
|
|
|
Each site hosted on IIS must have its own name, IP address, and port assigned - the combination must be unique, especially the address and port. It's much easier to simply set up a single domain and use virtual directories for separate sites, since most of us don't have multiple IP addresses assigned. A bit more detail about the type of problem you're experiencing would be helpful.
"If it's Snowbird season, why can't we shoot them?" - Overheard in a bar in Bullhead City
|
|
|
|
|
Do's any one really know the diffrence
bettwen Win32 & Linux C\C++ code?
I can't find very many diffrences bettwen
them.
Exept for the WinAPI code.
|
|
|
|
|
|
i know one more difference
#1 Linux System calls
#2 Conio.h
-----------------------------
"I Think It Will Help"
-----------------------------
Alok Gupta
visit me at http://www.thisisalok.tk
|
|
|
|
|
Thanks.
|
|
|
|
|
Hello all,
please help me
how to remove IE from Windows Server 2003
thanks in advance
|
|
|
|
|
I never use windows server 2003, but i think it is the same as windows xp. Try go to Control Panel -> Add/Remove Program -> Add/Remove Windows Component . Then you will see Internet Explorer checkbox option. Then clear it and click on the Next button. IE will remove from your system.
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
Well lets see I'm running 2000 so 2k3 should
do almost the same.
The way to do it is just open my computer
go to control panle then add\remove programs
in there should be IE #.
In XP its a little diffrent not much.
|
|
|
|
|
You should tried to install windows 2k3
and go to control panel to verify that
there has IE or not
|
|
|
|
|
I have Windows OS in C drive(first install), how to install Linus OS in D drive (Manually or using Software)
Opposite, Linux OS in C Drive(first install), and install windows OS in D Drive.
How to change between 2 that OS?
Ask More - Learn More
JohnJone
|
|
|
|
|
install windows first, on to either hard drive. then install linux. linux will see the windows installation, and will give you a nice menu to let you boot into either windows or linux when you start your computer. make sure linux doesn't try to install over your windows, but rather on the other hard drive.
--
Raoul Snyman
Saturn Laboratories
e-mail: raoul.snyman@saturnlaboratories.co.za
web: http://www.saturnlaboratories.co.za/
linux user: #333298
|
|
|
|
|
Start reading at the linux Documentaiton project. http://www.tldp.org/ Not only will it answer that question, but hundres of others - many that you wouldn't know you should ask! So read anything that looks like it might apply.
Some of the info there is dated, but it will at least get you started. There are several windows+linux how-tos, read them all, and decide how to do it. (there are several because there are several different, ways to do this that are correct)
The short answer is you install windows, then linux, being careful not to overwrite windows with linux. (it is easy to make a mistake so take your time and make sure you understand where things are being installed.
Don't forget that if something isn't quite right, changes to, or comments on those documents are generally welcome. Send them it. It is hard to write a guide to help a new guy when you are not new, so that perspective isn't always perfect.
|
|
|
|
|
I recommend you to install winxp first on the C: drive. Then install linux on the D: drive. You should read the information from Redhat linux manual in the section of disk partition.[^].
john_tran wrote:
How to change between 2 that OS?
What do you mean from here? Do you mean the menu of OS choice or you want to swap the parition after both OS have installed?
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
Yes, i dont know how to show a menu to choose between linux and windows.
If i install linux first, how to install Windows?
Ask More - Learn More
JohnJone
|
|
|
|
|
john_tran wrote:
If i install linux first, how to install Windows
Here[^] is the disucssion forum about installing windows and linux. Read it carefully. I hope that you would understand about it concept of installing between these 2 operating system.
john_tran wrote:
i dont know how to show a menu to choose between linux and windows.
Read redhat linux boot loader configuration manual[^], then you will have some concept about working with the Operating system start menu.
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
you usually don't have to worry about that... linux automatically installs a boot menu, and if you have already installed windows (which you should have if you want to dual-boot), it is usually automatically added to your boot menu. in most linux installation apps (yast for suse, anaconda for redhat), they give you the option to change boot preferences and order and things...
--
Raoul Snyman
Saturn Laboratories
e-mail: raoul.snyman@saturnlaboratories.co.za
web: http://www.saturnlaboratories.co.za/
linux user: #333298
|
|
|
|
|
Is Windows installed ?
is Linux installed?
which version of linux are you going to install?
in any case, if you have windows installed, on the "c" drive, and you have a "D" drive thats ok, how much room do you have left on your hard drive(s)?
do you have 2 physica drives or 1 drive partitioned?
when you pop in the linux cd it will read your configuration, and prompt you to auto partition or manual partition. if you don't know what you are doin, or the slightest bit confused, DON'T DO ANYTHING YET!!!!!
reply and and i can point you in the rigt direction
|
|
|
|
|
I'm planing to install Red Hat 7
I have C and D and E volume(20GB Hard-drive).
I installed Xp, and now to install Linux.
So i want to try both 2 cases . Windows first, and Linux later. Then Linus First and Windows later. So I worry that if linux dont allow me install windows later. So how i do now?
Ask More - Learn More
JohnJone
|
|
|
|
|
first as a suggestion, dump red hat 7 and downlod fedora core II . much nicer as it is a lot like XP
second: figure out which one OS you want to have loaded on your hard drive. messing around like his could mess up your HD permantly!!!!
the easiest way is to install WinXP first. make sure you have room for your linux install. min of 6-8 Gb
depending on what you install from the linux distro.
if you don't have enough room on your HD, i would suggest some type of disk utility to remove the D & E partitions. or, tooos in your XP CD and do a fresh install. when it comes to partition size, create a partition size of 10 GB for windows. lave the rest free unpartitiond space.
do your install of Xp and then put in your Linux Cd and follow the screen prompts. if your not sure, download the redhat install manual from their site. when it comes to the partitioning, choose automatic. if you want to do the manual way, read the following
*********************************************
A swap partition (at least 32MB) swap partitions are used to support virtual memory. In other
words, data is written to a swap partition when there is not enough RAM to store the data your
system is processing. The size of your swap partition should be equal to twice your computer's
RAM, or 32MB, whichever amount is larger.
For example, if you have 1GB of RAM or less, your swap partition should be at least equal to the
amount of RAM on your system, up to two times the RAM. For more than 1GB of RAM, 2GB of
swap is recommended. Creating a large swap space partition will be especially helpful if you plan
to upgrade your RAM at a later time.
A /boot partition (100MB) the partition mounted on /boot contains the operating system
kernel (which allows your system to boot Red Hat Linux), along with les used during the bootstrap
process. Due to the limitations of most PC BIOSes, creating a small partition to hold these les is a
good idea. For most users, a 100MB boot partition is sufcient.
Warning
Do not create your /boot partition as an LVM partition type. The boot loaders included with Red
Hat Linux cannot read LVM partitions and you will not be able to boot your Red Hat Linux system.
A root partition (1.7-5.0GB)this is where "/" (the root directory) will be located. In this setup,
all les (except those stored in /boot) are on the root partition. A 1.7GB root partition will permit
the equivalent of a personal desktop installation (with very little free space), while a 5.0GB root
partition will let you install every package.
***************************************************
Notice the sze of partitions you need?
root --> 1.7 gb - 5.0 gb
swap --> up to 2 gb
boot --> 100mb
+ any etra partitions you want
you might want a FAT32 partition so you can share file between linux & Windows.
as for a type of install, do a "desktop install"
like i said in a different post, read th documetation.. at this url in pdf format
http://www.redhat.com/docs/manuals/linux/RHL-9-Manual/pdf/rhl-ig-x86-en-9.pdf
hope this helps
|
|
|
|
|
when OS start, it call Master Boot. Master Boot include Partition Entries.
Partition Entry has BootSector. And Boot Sector has system information and a [B]code [/B] to load OS into memory, right?
I want to ask that What structure of this code? what language make it?
And how to add one by myself?
In addition, when OS load itself into RAM, What file it will load?
Give me an example when DOS load into RAM (and maybe Windows too)
Thanks
Ask More - Learn More
JohnJone
|
|
|
|
|
i know that on linux it's the /boot/vmlinuz file that is the kernel, and that gets loaded into memory first...
i also know that windows nt/2k/xp/2k3 looks at boot.ini in your root (c:\) to see where to find the kernel, and that the ntldr file in your root is also used in the boot process... don't really know much more than that however...
--
Raoul Snyman
Saturn Laboratories
e-mail: raoul.snyman@saturnlaboratories.co.za
web: http://www.saturnlaboratories.co.za/
linux user: #333298
|
|
|
|
|
Hi, my computer have 7GB of HDD drive. I run windows xp pro on the 4GB space. For the other 3GB I did not use it so I leave it as unpartition space. But now I want to install linux redhat 9.0 on the 3GB unpartition space. How should I do that? I also have a document about installing linux but the demonstration will take all of the disk space of the user. But what I want is how to cofigure the HDD, RAM drive... by manually. Can anyone could help me to solve this problem???
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
The header of your message and the contents are in conflict with each other. Which one is correct, do you want to install Linux in the unpartitioned space or on an existing Windows partition? Have you read the Red Hat Linux 9 installation guide, especially Appendix G?
|
|
|
|
|
markkuk wrote:
do you want to install Linux in the unpartitioned space or on an existing Windows partition?
Yes, that what I need. I have a magaizne about linux and tell every step to create the partition for linux (such as swap, root...) without affect to an existing winxp partition. But now I lost that magazine, so I don't know how to install it.
A thousand mile of journey, begin with the first step.
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|