(untagged)

Sign Code

crino

0.00/5 (No votes)

15 Nov 2006

How to sign the code by your own certificate and install the certificate on device

Download source files - 705.63 KB

Introduction

This article is for test purposes only, the best way to sign code is Mobile2Market, Verisign, etc...
With WM5, Microsoft has implemented a new security schema on PocketPC too.
The new schema requires that the applications be signed with a valid certificate to run without problems on devices.

For simple applications, the schema is not a problem. You'll get some boring popups to run the applications or to install cabs the first time. We have more problems when we try to deploy services or drivers, our DLLs or applications will not run because the schema is loaded after service.exe and device.exe processes!

In this article, I'll explain how we can deploy our own certificate on device and sign our code.

Step 1 - Create the Certificate

The first step is to create our certificate. To do this, we'll use the utility makecert.exe:

makecert -r -sv MyCert.pvk -n "CN=MyCert" -b 01/01/2000 -e 01/01/2099 MyCert.cer

For more information about makecert.exe parameters, refer to MSDN library.
Now we have our certificate (MyCert.cer) and private key (MyCert.pvk), but we need .pfx to pass it to signtool.exe, so go on to step 2.

Step 2 - Create .pfx from the .cer

To create .pfx file from .cer file, we've to run pvk2pfx.exe tool:

pvk2pfx.exe -pvk MyCert.pvk -spc MyCert.cer -pfx MyCert.pfx

The command will create a .pfx file (MyCert.pfx).

Step 3 - Create the provisioningdoc XML

Ok, now we are ready to build our cab which will install our certificate on devices. To do this, we've to create our wap-provisioningdoc XML.

<?xml version="1.0" encoding="utf-8" ?>
<wap-provisioningdoc>
<characteristic type="CertificateStore">
    <characteristic type="Privileged Execution Trust Authorities">
        <characteristic type="[cert_sha1]">
            <parm name="EncodedCertificate" value="[cert_base64]" />
        </characteristic>
    </characteristic>
</characteristic>
<characteristic type="CertificateStore">
    <characteristic type="SPC">
        <characteristic type="[cert_sha1]">
            <parm name="EncodedCertificate" value="[cert_base64]" />
            <parm name="Role" value="222" />
        </characteristic>
    </characteristic>
</characteristic>
</wap-provisioningdoc>

This is the standard schema for our provisioningdoc.
We've to fill [cert_sha1] and [cert_base64] with our values got from MyCert.cer. To obtain these values, we've to use openssl.exe tool:

openssl sha1 MyCert.cer > MyCert_sha1.txt
openssl base64 -in MyCert.cer > MyCert_base64.txt

With these commands, we get two files with sha1 and base64 values of our certificate. So create an empty file '_setup.xml' and pass the content into:

<?xml version="1.0" encoding="utf-8" ?>
<wap-provisioningdoc>
<characteristic type="CertificateStore">
    <characteristic type="Privileged Execution Trust Authorities">
        <characteristic type="30bc827f441fa4437b645163e49ade7226b362c3">
            <parm name="EncodedCertificate" 
	    value="MIIB7zCCAVigAwIBAgIQSZfc9OLump1HzDNpsZ2edTANBgkqhkiG9w0BAQQFADAR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" />
        </characteristic>
    </characteristic>
</characteristic>
<characteristic type="CertificateStore">
    <characteristic type="SPC">
        <characteristic type="30bc827f441fa4437b645163e49ade7226b362c3">
            <parm name="EncodedCertificate" 
	    value="MIIB7zCCAVigAwIBAgIQSZfc9OLump1HzDNpsZ2edTANBgkqhkiG9w0BAQQFADAR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" />
            <parm name="Role" value="222" />
        </characteristic>
    </characteristic>
</characteristic>
</wap-provisioningdoc>

We're ready to build our cab to deploy on our devices.

Step 4 - Build the .cab

This is the most simple step. We've to run makecab.exe tool:

makecab.exe _setup.xml mycert_cert.cab

Our certificate is now ready to install on devices!

Step 5 - Sign our Application Code

After we installed the certificate on our devices, we can sign our code with MyCert.pfx for our code to run as trusted.
We've to use signtool.exe tool:

signtool.exe sign /f MyCert.pfx *.exe *.cab

signcode -v MyCert.pvk -spc MyCert.cer *.exe

With these five simple steps, we've our certificate applications!

History

19/12/2005 - Initial article
30/12/2005 - Corrected the command line on Step 5
31/12/2005 - Regenerated the certificate and updated zip file
15/11/2006 - Added command line in Step 5 and updated zip file with signcode.exe tool

License

This article has no explicit license attached to it but may contain usage terms in the article text or the download files themselves. If in doubt please contact the author via the discussion board below.

A list of licenses authors might use can be found here