It has been the second time since I have run into the issue of correctly configuring Common.Logging
on my project. So what is the problem? Let's start with the basics:
Common.Logging
should be a generic interface for logging which can be used by other frameworks and libraries to perform logging. The final user (you or me) uses several frameworks in his/her final application and if all of these frameworks will use different logging frameworks, it will turn into a configuration nightmare. So our favorite frameworks such as Spring.NET, Quartz.NET are using Common.Logging
. This interface in turn uses a concrete logging framework to perform the logging (the act of writing the log lines to somewhere).
A typical scenario can be, for instance, the Common.Logging
and Log4Net combination. In our application configuration file (web.config or app.config), we have to configure Common.Logging
to use the Log4Net and then we can continue with the Log4Net configuration specifying what should be logged.
<common>
<logging>
<factoryAdapter type="Common.Logging.Log4Net.Log4NetLoggerFactoryAdapter, Common.Logging.Log4Net">
<arg key="configType" value="INLINE" />
</factoryAdapter>
</logging>
</common>
<log4net>
<appender name="ConsoleAppender" type="log4net.Appender.ConsoleAppender">
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date %-5level %logger - %message%newline"/>
</layout>
</appender>
</log4net>
My general problem is that Common.Loggin.Log4Net
facade is looking for a concrete version of the Log4Net library. Concretely, the version: 'log4net (= 1.2.10)
'. That is not a problem if you are not using some other framework which depends on higher version of Log4Net.
In my case, the le_log4net
library (the logentries library) is using log4net 2.0. So if you are using NuGet, you might obtain the following exception while adding the references:
A similar thing might happen if you just decide to use the latest Log4Net by default. Then, you might get an exception when initializing Spring.NET context or starting the Quartz.NET scheduler:
Could not load file or assembly 'log4net, Version=1.2.0.30714, Culture=neutral,
PublicKeyToken=b32731d11ce58905' or one of its dependencies.
The located assembly's manifest definition does not match the assembly reference.
(Exception from HRESULT: 0x80131040)
Solution 1: Ignore NuGet, Define Runtime Binding
One way to get around this is to define runtime assembly binding. But this solution forces you to add the reference to log4net manually. NuGet controls the version and won't let you at references on the fly the way that you would. So to get over, add the latest Common.logging.Log4net
façade and Log4Net version 2 (which you need for some reason). Then, you have to define the assembly binding in the configuration file.
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="Common.Logging" publicKeyToken="af08829b84f0328e"/>
<bindingRedirect oldVersion="1.2.0.0" newVersion="2.0.0.0"/>
</dependentAssembly>
</assemblyBinding>
</runtime>
Solution 2: Just Use the Older Version of Log4Net (1.2.10)
If you do not have libraries that are dependent on log4Net version 2.0.0, then just remember to always use log4net 1.2.10. This is the version which Common.Logging.Log4Net
is looking for. Or just let NuGet manage it for you. You can add Common.Logging.Log4Net
via NuGet and it will automatically load the correct version of Log4Net.
Solution 3: Try Other Logging Library for Instance NLog
This actually is not a real solution. I have experienced similar issues while using NLog, concretely try to use the latest NLog library with the Common.Logging.Nlog
façade and you will obtain something similar to:
{"Could not load file or assembly 'NLog, Version=1.0.0.505, Culture=neutral,
PublicKeyToken=5120e14c03d0593c' or one of its dependencies. The located assembly's
manifest definition does not match the assembly reference.
(Exception from HRESULT: 0x80131040)":"NLog, Version=1.0.0.505, Culture=neutral,
PublicKeyToken=5120e14c03d0593c"}
The solution here is similar, you will have to define Runtime Binding:
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="NLog"
publicKeyToken="5120e14c03d0593c" culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-2.0.0.0" newVersion="2.0.0.0" />
</dependentAssembly>
</assemblyBinding>
</runtime>
What was interesting here is that NuGet actually took care of this for me. I have just added the Common.Logging.NLog
façade and I guess NuGet spotted that I have already NLog 2 and that this Runtime Binding is necessary. If you look at the documentation of bindingRedirect, you will see that we have the right to specify the range of versions in the oldVersion
attribute. Here, all the versions will be bound to the 2.0.0.0 version.
Summary
Anyway, NLog and Log4Net are both cool logging frameworks, just use the one you prefer. As I have shown above, it is possible to use them together with Common.Logging
. It just takes a few more lines to configure it correctly.
CodeProject