|
I am having a problems printing the output for this program. With C++ when I compile and run the program I am left with an exe file. How do I incorporate code to print out the output? Below is the code. Where do I enter it within the program? Basically I want to be able to print the output.
//#include
int main()
//(int,char*)
//{
//ofstream printer ("1pt1:");
//Printer <<"test"<<endl;
//return o;
//}
{
int c;
double fee;
double total;
char a ='y', ans;
string input;
int number;
while (a =='y'|| a =='Y')
{
cout << "\nChoose from options below.\n";
cout << "\nEnter A to calculate total RWA cost.\n";
cout << "\nEnter B to calculate RWA base estimate.\n";
cout << "\nEnter your choice, then press the enter key:\a";
cin >> ans;
cin.ignore();
if (ans == 'A' || ans == 'a' ){
cout << "\nEnter RWA Base Estimate, then press the enter key:$\a";
cin >> input;
cout << "You entered:$" << input << endl;
int pos = input.find(',');
while (pos != -1)
{
input.replace(pos, 1, "");
pos = input.find(',');
}
number = atoi(input.c_str());
fee = number * 0.04;
cout << fixed;
cout.precision(2);
cout << "4% Management Fee:$" << fee <<"\n";
total = number + fee;
cout << fixed;
cout.precision(2);
cout << "Total:$" << total <<"\n";
if (total >= 1 && total <= 2499)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.1 <<"\n";
cout << "Total Obligation:$" << total + (total * 0.1) <<"\n";
}
if (total >= 2500 && total <= 9999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.09 <<"\n";
cout << "Total Obligation:$" << total + (total * 0.09) <<"\n";
}
if (total >= 10000 && total <= 24999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.08 <<"\n";
cout << "Total Obligation:$" << total + (total * 0.08) <<"\n";
}
if (total >= 25000 && total <= 49999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.07 <<"\n";
cout << "Total Obligation:$" << total + (total * 0.07) <<"\n";
}
if (total >= 50000 && total <= 99999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.05 <<"\n";
cout << "Total Obligation:$" << total + (total * 0.05) <<"\n";
}
if (total >= 100000 && total <= 299999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.03 <<"\n";
cout << "Total Obligation:$" << total + (total * 0.03) <<"\n";
}
if (total >= 300000 && total <= 999999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.015 <<"\n";
cout << "Total Obligation:$" << total + (total * 0.015) <<"\n";
}
if (total >= 1000000 && total <= 2425000)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.005 <<"\n";
cout << "Total Obligation:$" << total + (total * 0.005) <<"\n";
}
}
if (ans == 'B' || ans == 'b') {
cout << "\nEnter Total RWA Cost, then press the enter key:$\a";
cin >> input;
cout << "You entered:$" << input << endl;
int pos = input.find(',');
while (pos != -1)
{
input.replace(pos, 1, "");
pos = input.find(',');
}
number = atoi(input.c_str());
fee = number * 0.04;
cout << fixed;
cout.precision(2);
cout << "4% Management Fee:$" << fee <<"\n";
total = number - fee;
cout << fixed;
cout.precision(2);
cout << "Total:$" << total <<"\n";
if (total >= 1 && total <= 2499)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.1 <<"\n";
cout << "Spendable Amount:$" << total - (total * 0.1) <<"\n";
}
if (total >= 2500 && total <= 9999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.09 <<"\n";
cout << "Spendable Amount:$" << total - (total * 0.09) <<"\n";
}
if (total >= 10000 && total <= 24999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.08 <<"\n";
cout << "Spendable Amount:$" << total - (total * 0.08) <<"\n";
}
if (total >= 25000 && total <= 49999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.07 <<"\n";
cout << "Spendable Amount:$" << total - (total * 0.07) <<"\n";
}
if (total >= 50000 && total <= 99999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.05 <<"\n";
cout << "Spendable Amount:$" << total - (total * 0.05) <<"\n";
}
if (total >= 100000 && total <= 299999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.03 <<"\n";
cout << "Spendable Amount:$" << total - (total * 0.03) <<"\n";
}
if (total >= 300000 && total <= 999999)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.015 <<"\n";
cout << "Spendable Amount:$" << total - (total * 0.015) <<"\n";
}
if (total >= 1000000 && total <= 2425000)
{
cout << fixed;
cout.precision(2);
cout << "Overhead:$" << total*0.005 <<"\n";
cout << "Spendable Amount:$" << total - (total * 0.005) <<"\n";
}
}
cout <<"********************************************************************""\n";
cout <<"* Rate Range Subtotal Max. Range *""\n";
cout <<"* .01 .1 $2,499 $250.00 $250.00 *""\n";
cout <<"* 0.09 $2,500 $9,999 $675.00 $675.00 *""\n";
cout <<"* 0.08 $10,000 $24,999 $800.00 $1,200.00 *""\n";
cout <<"* 0.07 $25,000 $49,999 $1,750.00 *""\n";
cout <<"* 0.05 $50,000 $99,999 $2,500.00 *""\n";
cout <<"* 0.03 $100,000 299,999 $6,000.00 *""\n";
cout <<"* 0.015 $300,000 $999,999 $10,500.00 *""\n";
cout <<"* 0.005 $1,000,000 $2,425,000 $7,125.00 *""\n";
cout <<"********************************************************************""\n";
cout<<"Would You Like to Perform Another Calculation (Y/N)?\a";
cin>> a;
}
cout <<"\nGoodBye\n";
getchar();
return 0;
cin >> c;
}
Old Program Below
// RWA's and Charges
#include <iostream>
using std::cout;
using std::cin;
using namespace std;
//using::endl;
int main()
{
int choice, c;
float amount,total,overhead;
cout << "\nChoose from options below.\n";
cout << "\nEnter 1 to calculate total RWA cost.\n";
cout << "\nEnter 2 to calculate RWA base estimate.\n";
cout << "\n\t\tEnter your choice, then press the enter key:";
cin >> choice;
if (choice == 1){
cout << "\nEnter RWA Base Estimate, then press the enter key:$";
cin >> amount;
overhead = amount * 0.04;
cout << "Total Overhead is:$" << overhead <<".\n";
total = amount + overhead;
cout << "Total:$" << total <<".\n";
if (total >= 1 && total <= 2499)
{
cout << "Cost is:$" << total + (total * 0.1) <<".\n";
}
if (total >= 2500 && total <= 9999)
{
cout << "Cost is:$" << total + (total * 0.09) <<".\n";
}
if (total >= 10000 && total <= 24999)
{
cout << "Cost is:$" << total + (total * 0.08) <<".\n";
}
if (total >= 25000 && total <= 49999)
{
cout << "Cost is:$" << total + (total * 0.07) <<".\n";
}
if (total >= 50000 && total <= 99999)
{
cout << "Cost is:$" << total + (total * 0.05) <<".\n";
}
if (total >= 100000 && total <= 299999)
{
cout << "Cost is:$" << total + (total * 0.03) <<".\n";
}
if (total >= 300000 && total <= 999999)
{
cout << "Cost is:$" << total + (total * 0.015) <<".\n";
}
if (total >= 1000000 && total <= 2425000)
{
cout << "Cost is:$" << total + (total * 0.005) <<".\n";
}
}
if (choice == 2) {
cout << "\nEnter Total RWA Cost, then press the enter key:$";
cin >> amount;
overhead = amount * 0.04;
cout << "Total Overhead is:$" << overhead <<".\n";
total = amount - overhead;
cout << "Total:$" << total <<".\n";
if (total >= 1 && total <= 2499)
{
cout << "Cost is:$" << total - (total * 0.1) <<".\n";
}
if (total >= 2500 && total <= 9999)
{
cout << "Cost is:$" << total - (total * 0.09) <<".\n";
}
if (total >= 10000 && total <= 24999)
{
cout << "Cost is:$" << total - (total * 0.08) <<".\n";
}
if (total >= 25000 && total <= 49999)
{
cout << "Cost is:$" << total - (total * 0.07) <<".\n";
}
if (total >= 50000 && total <= 99999)
{
cout << "Cost is:$" << total - (total * 0.05) <<".\n";
}
if (total >= 100000 && total <= 299999)
{
cout << "Cost is:$" << total - (total * 0.03) <<".\n";
}
if (total >= 300000 && total <= 999999)
{
cout << "Cost is:$" << total - (total * 0.015) <<".\n";
}
if (total >= 1000000 && total <= 2425000)
{
cout << "Cost is:$" << total - (total * 0.005) <<".\n";
}
}
//return 0;
cin >> c;
}
|
|
|
|
|
Hi
What happens if you run this code;
ofstream printer("lpt1:");
printer << "test" << endl;
If that prints something on your printer, you're in business and can simply change all instances of 'cout' to 'printer', with above lines added at beginning of the main function.
HTH
Martin
|
|
|
|
|
Thanks Martin,
I will try your recommendation and see what happens. I did not know you had to change all couts to printer. I am a beginner and have been working with this for awhile. I have had many recommendations and probably due to my inexperience I was not able to figure out what was going on.
|
|
|
|
|
From a command prompt, redirect the output of your program to the printer by typing:
program > prn BTW, for future posts, there is no need to post all of your code, only the relevant parts. Asking folks to wade through a bunch of code is a sure-fire recipe for getting little to no help.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Does anybody know of an API for Digital Cameras?
I am the handsome one in the crowd.
|
|
|
|
|
|
hai all,
when i connect a Oracle with vc, after closing the application window i am getting "User Break point at &72ff234" an error in a messagebox , and it automatically opens an assembly program and arrow points to the 72ff234 line.
i am getting this only while closing the application after using the database connection. i tested the program , with out connecting to database, i close the app. windows.. i didnt get the error ...
how clear it...
thanks in advance...
Surya Prakash 
|
|
|
|
|
It sound like you have forgotten to disconnect from the database and clean up the appropriate database handles before exiting your application.
Ant.
I'm hard, yet soft.
I'm coloured, yet clear.
I'm fruity and sweet.
I'm jelly, what am I? Muse on it further, I shall return! - David Walliams (Little Britain)
|
|
|
|
|
Previously (ie. VC++ 6), the Profiler was only included in the Professional and Enterprise versions. Is the Profiler included in VC++ 2003 Standard or do you have to purchase Visual Studio Pro 2003 (since it's not possible to purchase VC++ 2003 Professional separately) ?
|
|
|
|
|
|
How can i implement one function to get the file size of a file which takes pointer to the file path?Please help..
|
|
|
|
|
Hi
Using Win32, you can use FindFirstFile and inspect the WIN32_FIND_DATA structure returned from that (and call FindClose when you leave).
In .NET, that information is available from the FileInfo class.
HTH
Martin
|
|
|
|
|
Why not use GetFileSize()?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
The function should take only the constant pointer to the path of the file..
|
|
|
|
|
Ok, what's wrong with:
DWORD SizeOfFile( LPCTSTR lpszFile )
{
DWORD dwSize = 0;
HANDLE hFile;
hFile = CreateFile(lpszFile, 0, 0, NULL, OPEN_EXISTING, ...);
if (hFile != INVALID_HANDLE_VALUE)
{
dwSize = GetFileSize(hFile, NULL);
CloseHandle(hFile);
}
return (dwSize);
}
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Try
CFile myFile(lpszFileName, CFile::modeRead);
int len = myFile.GetLength();
Some people see things that are and ask, Why? Some people dream of things that never were and ask, Why not? Some people have to go to work and don't have time for all that ...
Author: George Carlin
|
|
|
|
|
Hello!
I've got a property page, containing a tab view. The tab pages are a bit brighter than the normal dialogs, which seems to be correct. But unfortunately all the static controls in this tab page have the standard gray color, i.e. the one of the dialogs and not the one of the tab page.
How can I make the statics look correct?
Best regards
|
|
|
|
|
Hi
Try setting the static controls' Transparent property to True in the Resource Editor.
HTH
Martin
|
|
|
|
|
I've tried this, but the static looks exactly the same as before, with the darker gray...
Any other ideas?
Thanks and best regards
|
|
|
|
|
Oh, btw, it's not only the statics. Also the buttons (edges), checkboxes and radios all look incorrect, all have that darker gray... The only things that look correct are the edit controls and the progress controls...
Best regards
|
|
|
|
|
OK
What are you using? VC6, VC7?
Is this Tab control MFC, eg. with CPropertySheet/CPropertyPage.
Is is dynamically created, or just the standard controls dragged from the toolbox onto the dialog in the resource editor?
Does this happen with all tab/property pages on your machine, or just the one in your app?
Martin
|
|
|
|
|
Martin Koorts wrote:
What are you using? VC6, VC7?
VC6, it's a MFC project.
Martin Koorts wrote:
Is this Tab control MFC, eg. with CPropertySheet/CPropertyPage.
I'm not using the CPropertySheet/CPropertyPage classes.
Martin Koorts wrote:
Is is dynamically created, or just the standard controls dragged from the toolbox onto the dialog in the resource editor?
It's just dragged from the toolbox into the dialog, using the resource editor.
I'm handling the click messages on the tabs myself, to display the correct dialogs / dialog elements. I'm not using any third-party classes to do this.
Martin Koorts wrote:
Does this happen with all tab/property pages on your machine, or just the one in your app?
It just happens in my application. In the desktop display properties for example it looks correctly.
Any ideas??
Thanks for your reply and best regards
|
|
|
|
|
What happens if you create a Dialog-based MFC app using the wizard, with the same controls?
Sorry if this messes you about, but that's just what I would try.
Martin
|
|
|
|
|
Exactly the same...
- Create new MFC dialog project
- Drag-n-drop a tab view into the dialog
- Drag-n-drop a static onto the tab view
- Add a XP manifest (resource 24/1) to the project and manually add InitCommonControls()
- Build and run
The statics have the wrong background.
Best regards,
Dominik
_outp(0x64, 0xAD);
and
__asm mov al, 0xAD __asm out 0x64, al
do the same... but what do they do?? 
(doesn't work on NT)
|
|
|
|
|
The problem that you have is that the static controls are taking the background colour of your dialog rather than the tab control. I have gotten around this problem in the past by writing an owner drawn static control.
Here[^] is a good example of an owner drawn static. It may be a bit too much for what you are doing, however you could use it for ideas.
Ant.
I'm hard, yet soft.
I'm coloured, yet clear.
I'm fruity and sweet.
I'm jelly, what am I? Muse on it further, I shall return! - David Walliams (Little Britain)
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
