|
That's right, i saw it to. And i tried it yesterday again, with normal '#import <activeds.dll>' (also with ") you get this error message:
--------------------Konfiguration: Test5 - Win32 Debug--------------------<br />
Kompilierung läuft...<br />
Test5.cpp<br />
d:\daten\projekte\teamscrip\c++\test5\test5.cpp(4) : fatal error C1083: Typbibliothek-Datei kann nicht geöffnet werden: 'activeds.dll': Fehler beim Laden der Typbibliothek/DLL.<br />
Fehler beim Ausführen von cl.exe.<br />
<br />
Test5.exe - 1 Fehler, 0 Warnung(en)<br />
the compiler wasn't able to load the dll.
|
|
|
|
|
I am really out of ideas, so anything at this point is going to be trial and error 
MS says the 'interface library' is embedded within the DLL. Normally you would use the #import directive to get at that, and it does not currently work ... 
Perhaps, try running RegServer on the Dll and see if it will show up as an ActiveX or else at least allow you to #import after doing that. Maybe it is not 'registered' yet?
Maybe there needs to be a TLB generation run against the DLL so you can include the type library in your project instead of importing the DLL directly.
Another thing I found on MDSN was this - (assume it is an ActiveX control for a moment..)
The following procedure adds dispatch class and header files for an ActiveX control to a Visual C++ project.
To add an ActiveX control to a Visual C++ Project:
On the Project menu, click Add to Project. A shortcut menu appears.
Click Components and Controls. The Components and Controls Gallery dialog box appears.
Click the component to add to your project. Visual C++ displays a dialog box from which you can select a subset of the component's classes to add to your project.
Click to select the check boxes of the classes you want to add, and click OK.
Visual C++ generates dispatch class and header files for the component and adds them to your project.
|
|
|
|
|
Okay, I think I got it...
1. Go to the stdafx.h and REMOVE the following line:
<br />
#define WIN32_LEAN_AND_MEAN // Exclude rarely-used stuff from Windows headers<br />
Once I did this, I did not get the error from the IAds.H header file complaining about the typedef interface lines of code any more. Must be using 'rarely used stuff'... 
2. I included these header files:
<br />
#include "WTYPES.H"
#include "ADSIID.H"
#include "iads.h"
#include "Adshlp.h"
3. I added these libraries on the Project Settings : Link : Input : Object/Library Modules :
ActiveDS.lib adsiid.lib
Then I was able to compile and link a project with these lines in it:
<br />
HRESULT hr;<br />
IADs* pads;<br />
hr = ADsGetObject( L"LDAP://rootDSE", IID_IADs, (void**)&pads);<br />
Note that you had IADS and I changed it to IADs
|
|
|
|
|
I tried it and becomes this:
--------------------Konfiguration: Test5 - Win32 Debug--------------------<br />
Kompilierung läuft...<br />
StdAfx.cpp<br />
Kompilierung läuft...<br />
Test5.cpp<br />
d:\program files\microsoft visual studio\vc98\include\iads.h(3346) : error C2283: 'get_DefaultContainer' : Rein virtuelle Methoden sind in unbenannter Klasse/Struktur struct nicht erlaubt<br />
d:\program files\microsoft visual studio\vc98\include\iads.h(3349) : error C2283: 'put_DefaultContainer' : Rein virtuelle Methoden sind in unbenannter Klasse/Struktur struct nicht erlaubt<br />
d:\program files\microsoft visual studio\vc98\include\iads.h(3351) : error C2627: '<unbekannt>' : Member-Funktion in einer unbenannten Klasse definiert<br />
d:\program files\microsoft visual studio\vc98\include\iads.h(3351) : warning C4094: Unbenanntes 'struct' deklariert keine Symbole<br />
<br />
Test5.exe - 3 Fehler, 1 Warnung(en)
After this i set a preprozessor definition "CINTERFACE" to use the standard C interface and my compile works. Now i will try to get the information from LDAP. If you knew something about this errors, please tell me.
Otherwise i will try it with the work around.
Thank you
Carl
|
|
|
|
|
At last i get also the last errors. Maybe i destroyd the iads.h or it got the bug in a privious action.
thank you
|
|
|
|
|
How to change default icons in MDI application? I edit them in recsorce editor, save project changes and run application, but all icons remain the same as if without modification. But they are modified in .ico files under \\res folder but after application startup old icons appear?
9ine
|
|
|
|
|
You are probably only modifying one resolution of the icon. I think that each one has at least two resolutions, 16x16 and 32x32. In some cases, a 48x48 resolution also exists.
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
I've already done with it. I modified not resolution but image contents and it didnt work, then I deleted all icons and created new assigning them all the same ID's and this way it worked?
9ine
|
|
|
|
|
Hi,
I use ATL automation in my project and I want to migrate it to VS 7.1 from VS 7.0.
VS Convert and build the project successfull, but
when I start application I got a crash in:
int AFXAPI AfxWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance,
LPTSTR lpCmdLine, int nCmdShow)
in line:
if (!pThread->InitInstance())
pThread == NULL !!!!
This crash have place in all old project (VS 6.0 or 7.0) after convertion.
You can see it for example in Nick Hoddup sample from this:
http://www.codeguru.com/Cpp/COM-Tech/atl/atl/article.php/c55/
sample:
http://www.codeguru.com/code/legacy/atl/AutoATL.zip
I have no idea to correct this situation....
Plaese help..
|
|
|
|
|
hi
i am doing a part of the a project and i am stuck . i am supposed to fix a bug .in here some of the controls in the control panel are fixed due to the need and coz of that whenever the DPI value is changed in the settings the controls in the panel will not expand and givng problems so
i want DPI(dots per inch ,windows XP) values in the VC++ code
plz help me
|
|
|
|
|
Check out GetDeviceCaps() and GetSystemMetrics().
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
hi
thanks for responding
i checked it i didn't get a suitable one to get the dpi value
can u send a bit of a code on how to get it
plz
|
|
|
|
|
chethankumar.U wrote:
i checked it i didn't get a suitable one to get the dpi value
You must not have checked very hard. It says right there in the documentation for GetDeviceCaps() that LOGPIXELSX and LOGPIXELSY can be used to get the pixels per inch of a particular device. Also, the documentation for GetSystemMetrics() shows that SM_CXSCREEN and SM_CYSCREEN can be used to get the width and height, in pixels, of the screen.
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
is DOts per inch and pixels per inch are same
if not is their any relationship
|
|
|
|
|
chethankumar.U wrote:
is DOts per inch and pixels per inch are same
The last time I checked, a pixel was a dot.
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
hi
is someone out there .
|
|
|
|
|
Sometimes you must wait more than 65 mintues for a reply.
Sometimes you must wait more than 65 minutes for a USEFUL reply 
|
|
|
|
|
If you'd get to work a little earlier and start answering questions, we wouldn't have these problems! 
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
Hi all!
I have a project where I have to write documentation for source code.
As I have no experience in writing documentation, I wanted to ask you guys- does any of you have any experience with that, and what recommendations could you give? Eventually links to good articles about that?
Thank you!
Iliya Yordanov,
www.csharp-home.com
|
|
|
|
|
what is it for ? use or maintenance ?
first of all, you code must be commented (it doesn't mean to comment each line of code. it just means to do it smartly).
then, describe the function with what they do (and not necessarily how they work to obtain such result - this is in the code comments).
cheers,
TOXCCT >>> GEII power
[toxcct][VisualCalc]
|
|
|
|
|
There are many types of documentation. But for technical usage doc, then I recommend DOxygen[^]. Its free and a good automated way of documenting your work.
I Dream of Absolute Zero
|
|
|
|
|
Check out this[^] article
Artificial intelligence is no match for natural
stupidity.
Never argue with an idiot. They will drag you down to their level where they are an expert.
|
|
|
|
|
Hi
I am trying to understand what file is in Win32 system and how to access.
Let me be more specific. I am comming from the UNIX word where a file is an area in the disk in a location pointed out by a "unique" integer number known as the inode. Each process then traditionaly has an array of 15 file handles and any time a file is opened is is associated with one entry on the that array. The array number is the file handle and numbers from 0 to 2 are the standard ones. For higher lever IO there is the standard FILE structure which is associated with one of the FILE handles.
In windows you have the HANLDES that are returned by CreateFile, the CFILE classes and on top of that the Unix compatibility functions like _open() to open the whatever UNIX style handles.
I am trying to make sense of those (whithout the complexity of named pipes, memory ereas etc) as I think I make sense the UNIX/C interface. I am looking for a document to explain
i. How an area in a disk is related with file structures
ii. What is the meaning representation of compatibility functions in Win32? E.g. for my own inverstigation I found that the _stat (aka stat of UNIX) returns always the same inode number whatever the file is.
iii. How can I related the different handles logically. I saw hadles document which explains how to convert from one to the other but how they are related?
iv. How the files, the HANLDE and processes are related.
Any help will be much appreciated.
Life is a river with mist ahead...
|
|
|
|
|
Dimitris Vikeloudas wrote:
E.g. for my own inverstigation I found that the _stat (aka stat of UNIX) returns always the same inode number whatever the file is.
Which is what the documentation says it will do on FAT, HPFS, or NTFS file systems. It is a UNIX-specific value.
Dimitris Vikeloudas wrote:
iii. How can I related the different handles logically.
What exactly do you mean by this? A handle is nothing more than an object identifier. You have a handle: Dimitris Vikeloudas. It is what's used when we want to communicate with you (except that we do not destroy yours when we are done!).
Dimitris Vikeloudas wrote:
iv. How the files, the HANLDE and processes are related.
There is no relationship, except that a process can "own" zero or more handles. Per MSDN, a process is a running application that consists of a private virtual address space, code, data, and other operating-system resources, such as files, pipes, and synchronization objects that are visible to the process. A process also contains one or more threads that run in the context of the process. A handle is a a variable that contains the address of another variable, which in turn contains the address of the desired object, or a token that an application can use to identify and access an object such as a device, a file, a window, or a dialog box.
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
Hi.
Thanks very much. Your definition of the process it is enlightening.
So for a file you have a HANLDE pointing to a handle structure pointing to a file structure related to disk. That's what I am getting.
Is any similar chain for the CFile object? Also what happen with the UNIX compatibility functions like open. Is the integer that they return a handle casted to int or a is there an array of file descriptors that the C runtime environment maintains to emulate the UNIX process structure?
And what about stdio FILE structures? How do they know the access tokens of the files that they correspond. Simply what I am trying to understand is what is the relationship between an area in a disk and the logical structures. I think you answered what a HANDLE does on that.
If you know any documentation going to all these details will be much appreciated.
life is a river with mist ahead..
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
