|
Thank you very much for your comment.
Dave Kreskowiak wrote: they would have long since failed.
What do you mean?
|
|
|
|
|
CPU aside, nothing in the PC gets hot enough while operating to be of any concern. Mine runs at an internal temperature of about 33C, far too cool to melt anything inside (or even soften it). The CPU, if operated without a heat sink can get hot enough to destroy itself, but even then it will not get soft. Plastic parts nearby may melt, but movement will not cause the problem - heat will, and then only in a severely misconfigured system with no CPU cooling.
If the inside of a device ever got hot enough to cause parts to soften, the electronic functions of the system would have failed long before that event. Semiconductor devices are very sensitive to heat, and are destroyed by temperatures much lower than any that would cause structural weakening of the physical hardware.
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
Thank you very much for your detail explaination.
|
|
|
|
|
Absolutely not true, unless the device is already broken internally. Heat will kill electronics, as will enough shock, but I assume you mean normal movements, not drop kicks across the room.
Jerky movements of a running device that includes moving components (a disk drive still in use, for instance) can cause damage, but powered off even laptop PCs are quite durable, hot or cold.
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
Thank you very much for your comment.
Roger Wright wrote: Heat will kill electronics, as will enough shock, but I assume you mean normal movements, not drop kicks across the room.
I do not mean drop, just a normal movement. I also have some more question to ask, please check here.[^]
|
|
|
|
|
In WIndows 2000 where is the option to calabrate a UBS joystick.
The Joystick works OK, but ranges a bit out!
|
|
|
|
|
control panel > system > hardware > device manager
get the joystick, go to his properties, and there, there might be a calibrate button...
TOXCCT >>> GEII power [toxcct][VisualCalc 2.20] | soon : [VisualCalc 3.0]
|
|
|
|
|
Did not find anything.
When searching for new h/w did see a USB Human Interface Device, but no options for calabrations.
|
|
|
|
|
Control Panel > Game Controllers in XP. I don't have a Windows 2000 machine handy, but I seem to remember that the same control panel applet appears in Windows 2000.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
In 2000, it's the Gaming Options control panel. If you don't have any drivers, or incorrect drivers, installed for the Joystick, it won't show up in this panel. Try the manufacturer's website for updated drivers.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hi, does any one know how to activate the virus scan (suppose norton) to scan the flash drive everytime that i insert the flash drive to my computer USB port? The problem is when some one borrow my laptop they did not scan their flash drive and some flash drive contain virus that could be harmful to my laptop. Auto protect option is not meet what i need.
|
|
|
|
|
Can any one please help me in giving me a program that will backup the settings of the users of the system. If not API then, any existing EXE or a DLL in the windows .
Bhargava Alanka
|
|
|
|
|
Bhargava Alanka wrote: Can any one please help me in giving me a program that will backup the settings of the users of the system
What do you mean by setting of the user of the system? Do you mean the user profile of the user, if so try to log on as admin and copy the folder of user profile to any other back up devices. After you have fix the problem then you need to copy it back from the the backup device.
Note:
- You need to logon the user for first time to create the user profile folder before you replace the user profile with the one that you backup.
- During the time that you backup and restore the user profile make sure the user already log off the session.
|
|
|
|
|
I want API through which I can backup the settings of a user.
|
|
|
|
|
backing up is a file copying task, nothing more. You can do it he same way you copy any other files from one location to annother. Using NTFS you need administrator (backup admin?) rights to the machine in question.
|
|
|
|
|
I just downloaded a copy of Windows Vista Beta 1, but the only available computer I have to install it on has 240MB of RAM, and the install keeps aborting because it says it needs 256. Does anyone know if there is anyway to force the install to continue even though I don't have the amount of RAM it wants? Is there a way to fool the install into thinking I acutally have that amount of RAM?
Any help is appreciated. Thanks.
- Aaron
|
|
|
|
|
if it need 256 Mo, it need at least 256...
virtual memory don't exist at installation time of an Operating System as the HardDisk is not formated (not even partitionned maybe).
what happens when you overrun the memory capacity using windows is that the system uses the Hard disk as an extra storage place. here it is impossible.
so, no, it is not possible. if you want to install Vista, add some RAM in your PC... (and if you really want to see it running smoothly, you'll have to place much more RAM for it !!!)
TOXCCT >>> GEII power [toxcct][VisualCalc 2.20]
|
|
|
|
|
In my opinion, i think this solution is not possible. You must install enough memory during the time that you need to install windows.
|
|
|
|
|
You need a minimum of 256MB to install it, no exceptions!
If you want to actually run the thing without waiting 2 minutes for the system to respond to a mouse click, install 512MB or more.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hallo.
Help me please.
I'd like to write a toolkit that would allow to work with fingerprint device. Such functions as getting the finger image from the device, matching with other, save in database etc.
I have a device and driver for it.
Maybe you can give some tips what to do for achieving this.
I've disassembled the driver's "*.dll"s and found functions that might be necessary, but I don’t know how to work with them...
|
|
|
|
|
PaulNeyman wrote: I have a device and driver for it.
Can you give me the name of your device and its model number?
|
|
|
|
|
Fingerprint reader
I have DigitalPesona Password Manager Software for it.
|
|
|
|
|
hello, i am in need of some help. this problem has me completly stumped. i have no idea what caused this problem or how to fix it. i think i have tried everything possible (except a format and reinstall of windows). please read the complete question and help me if you can. thanks.
two days ago i turned on my computer. everything had been working fine the day before when i turned the computer off. my computer is supposed to connect to another computer (ill call it computer 2) on my home network (via an ethernet wire). computer 2 has internet connection sharing enabled on a wireless connection to my router. my laptop and computer 2 can connect wirelessly to my router.
my computer (computer 1) suddenly can't access anything on the network, it gets an IP from computer 2 (192.168.0.2), but it cant access computer 2's webserver (at 192.168.0.1:80), nor can it access any files on the network or my printer/scanner. i tried putting in a wireless pci card that my friend let me use for an hour. that got an IP from my router (192.168.15.6), but i still couldnt access files on my network or access webpages.
when i use computer 1 to ping computer 2, it says:
Pinging 192.168.0.1 with 32 bytes of data:
General failure.
General failure.
General failure.
General failure.
Ping statistics for 192.168.0.1:
Packets: Sent = 4, Recieved = 0, Lost = 4 (100% loss), when i try pinging computer 1 from computer 2, it says:
C:\>ping 192.168.0.2
Pinging 192.168.0.2 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.0.2:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
i've tried uninstalling and reinstalling the network drivers on my computer, i've tried using system restore, and ive tried reinstalling windows (did not format, just a reinstall). but i still can't access anything on my network or any webpages. has anyone had this problem before? or does anyone have suggestions on how to fix this?
thanks in advance,
sam kline
ps. all my computers are running windows xp home, SP1
<a href="http://dying.about.com/gi/pages/poll.htm?poll_id=2068629450">YES</a>
-- modified at 13:10 Saturday 3rd December, 2005
|
|
|
|
|
Try to check your router configuration. First question is: does your router act as DHCP server? The second question is: how many people that could access to the router configuration? One option in the router could block the specific computer to access an internet connection.
|
|
|
|
|
I take it you have already done this, but I'll mention it anyway:
First, turn off PC2, PC1, and Router. When I say turn off, I really mean disconnect the power cord!
Next, starting with the router, reapply power, restart, wait for the diagnostics to complete, and only then start PC1.
Check to insure that PC1 has internet access. If it does, open a DOS window and type in "ipconfig" (without the quotes). It should give you:
IP address assigned
Subnet mask
Standard Gateway
Write this information down. Now start PC2 and repeat the ipconfig command in a DOS window. Compare the settings and post the results from both machines here.
HunterSvcs - If only it would work the first time :=)
|
|
|
|