|
yeaaa... i didn't like the name.. and moreover i didn't want to use fake names like few people do here !!!!!!;P
,
it seems you have changed the scrolling banner color??what's special??
0x0400:
"But your mind is very complex, very tricky. It makes simple things complicated. -- that's its work. And for centuries it has been trained for only one thing: to make things so complicated that your life becomes impossible."- Osho
<marquee scrollamount="1" scrolldelay="1" direction="up" height="10" step="1">--[V]--
|
|
|
|
|
VivekuniQ wrote: i didn't want to use fake names like few people do here
Hmmm... Throwing sh*t at me. Huh
VivekuniQ wrote: it seems you have changed the scrolling banner color??what's special??
I've crossed 300 messages. He he
Jesus Loves <marquee direction="up" height="50" scrolldelay="1" step="1" scrollamount="1" style="background:#ffaaaa">
--Owner Drawn
--Nothing special
--Defeat is temporary but surrender is permanent
--Never say quits
--Jesus is Lord
|
|
|
|
|
Owner drawn wrote: I've crossed 300 messages. He he
So u counting your Messages... you dirty man
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers,
Alok Gupta
VC Forum Q&A :- I/ IV
|
|
|
|
|
normally "Counting the..." refers to the decreasing numbers.. but here it goes up!
0x0400:
"But your mind is very complex, very tricky. It makes simple things complicated. -- that's its work. And for centuries it has been trained for only one thing: to make things so complicated that your life becomes impossible."- Osho
<marquee scrollamount="1" scrolldelay="1" direction="up" height="10" step="1">--[V]--
|
|
|
|
|
VivekuniQ wrote: normally "Counting the..." refers to the decreasing numbers.. but here it goes up!
Hope So
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers,
Alok Gupta
VC Forum Q&A :- I/ IV
|
|
|
|
|
I didn't know about it until I checked my profile. I realised lol I've reached above 300.;)
Jesus Loves <marquee direction="up" height="50" scrolldelay="1" step="1" scrollamount="1" style="background:#ffaaaa">
--Owner Drawn
--Nothing special
--Defeat is temporary but surrender is permanent
--Never say quits
--Jesus is Lord
|
|
|
|
|
Congrates on ur count
but
change back the banner to normal colour
it was more effective , this is quiet flashy.
And spoils the real effect of the banner words.
Vikas Amin
Embin Technology
Bombay
|
|
|
|
|
|
hi,
i want to create a skin for my application using vc++. Help need !
Love With Babu
|
|
|
|
|
hi all
i want to know that in MFC CAsyncSocket class is present for the event driven network programming. is there is any class in .net framework that works the same as CASync class does.
ddd
|
|
|
|
|
I am programming with the API of Autodesk Inventor(a CAD software). and there is a function which is described in its documentation below:
Profiles.AddForSolid Method:
Method that creates a profile containing multiple paths for creating solid features.
<code>AddForSolid(Combine As Boolean = True,Curves As Variant,reserved As Variant)As Profile</code>
<code>Combine </code>Optional input Boolean that specifies ......(the following info doesn't help, so I leave it out)
<code>Curves</code> Optional input ObjectCollection that contains sketch curves. The method will create a profile consisting of only those paths that are comprised of the exact set of sketch curves specified in the ObjectCollection. If not specified, all the possible profile paths are included. This argument is ignored if the Combine argument is specified to be True.
<code>reserved</code> Optional input Variant reserved for future use. This argument is currently ignored.
while the corresponding wrapper class in the rxInventor.tli is declared as:
HRESULT Profiles::AddForSolid ( VARIANT_BOOL Combine, const VARIANT & Curves, const VARIANT & reserved, struct Profile * * _presult )
I have no idea how to pass the paramter const VARIANT & Curves, could anybody help me ?
Thank you very much!!!
-------------------
I am learning C++ and English
|
|
|
|
|
I made it
-------------------
I am learning C++ and English
|
|
|
|
|
Thanks for the reply (you are one further than many posters that find the answer themsleves), but to make it wonderful, next time, explain also HOW you made it (for other users that may be interested by the answer)
~RaGE();
|
|
|
|
|
I found that it was one of my mistakes that made the easy problem much more complicated.
if anybody runs into the same problem, just feel free to email me, I will be happy to help you as soon as possible!
my email:
ewighell@hotmail.com
I must addmit ,I have got a lot of helps from codeproject and feel so grateful that I will try my best to help others.
-------------------
I am learning C++ and English
|
|
|
|
|
I need to put a page break in a lengthy html file for printing purpose. The html file is having information in table format (we use html table – tag). After each 66 row, I have to put a page break.. How I can do in VC++
SHADRACH
|
|
|
|
|
The obvious way would be to do the printing within your own app, and generate a new page every 66 lines. Remember, that's not 66 lines of HTML, you need to parse and look for your table row end tags.
Christian Graus - Microsoft MVP - C++
|
|
|
|
|
How to place a ToolBar created by CreateWindowEx() in a particular position on Dialog. I tried by placing a static control & then...see code
WINDOWPLACEMENT w;
::GetWindowPlacement(::GetDlgItem(m_hWnd, IDC_STATIC_TOOL), &w);
::SetWindowPlacement(hToolBarHandle, &w);
But the ToolBar displayed bit lower than the position of static control.
When I tested using MFC it placed exactly sample place that of static text
::GetWindowPlacement(::GetDlgItem(m_hWnd, IDC_STATIC_TOOL), &w);
m_Toolbar.CreateEx(this,WS_CHILD | CCS_NOPARENTALIGN|TBSTYLE_FLAT);
m_Toolbar.LoadToolBar(IDR_TOOLBAR);
::SetWindowPlacement(m_Toolbar.m_hWnd, &w);
Also in MFC the width of toolbar is same as the toolbar resource/static control where we place the toolbar. But in SDK the displayed toolbar width is higher. How to set/fix size of tool bar in SDK. What could be the trouble in Win32 SDK way? any suggestions???
|
|
|
|
|
Here's how I'd do it:
---------------------
RECT rc;
::GetWindowRect(::GetDlgItem(m_hWnd, IDC_STATIC_TOOL), &rc);
::MapWindowPoints(NULL, m_hWnd, reinterpret_cast<LPPOINT>(&rc), 2);
m_Toolbar.CreateEx(this, WS_CHILD | CCS_NOPARENTALIGN|TBSTYLE_FLAT);
m_Toolbar.LoadToolBar(IDR_TOOLBAR);
::MoveWindow(m_Toolbar.m_hWnd, &rc);
Steve
|
|
|
|
|
If it is MFC CToolBar it will work fine if we use m_ToolBar.CreateEx() & m_ToolBar.Load().
But what I am looking for is win32 only, There is no m_ToolBar.
I am creating ::CreateWindowEx(). This toolbar is not placing correctly.
|
|
|
|
|
My project needs to call Matlab function, Is it possible to make it a part of my project so that it can be run without Mablab enviroment?
Thanks in advance.
|
|
|
|
|
Check this[^] out
Ryan "Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"
|
|
|
|
|
Hi.
Ive created a toolbar in c# and ive been trying to find a way to use this in vc++. can someone please guide me as to how it can be done?
thanx.
|
|
|
|
|
you should refer to this book "Inside C#"
|
|
|
|
|
ok thanx ill try to consult the book
|
|
|
|
|
you now , there is a OLE/COM Object Viewer in MS visual c++, which can be used to view the type libaray.
I am viewing a huge type library and find it very dificult to locate a specified interface. is there a search tool or something like this to find it quickly?
Thank you very much!!!
-------------------
I am learning C++ and English
|
|
|
|