|
Fiddler[^] is written by a member of the IE team. It acts as a proxy between the client and server.
If you don't want to use a proxy, then you'll have to use some kind of network traffic analyzer. I use Ethereal[^].
|
|
|
|
|
Thank-you.
I got it working!
|
|
|
|
|
So, I have written a service which never made any problems, but it just doesn't want to run under WinXP 64bit (the same service runs w/o any problems under 32bit). The event log always says something about an invalid parameter (event id 7023). It seems that the service starts during boot, but stops at some point; I can't test this myself, since I don't have a 64bit system - my users are just reporting this.
What could the cause for this be? I really don't understand why it works on a 32bit XP system, but fails on a 64bit one.
|
|
|
|
|
|
I finally talked the boss into buying us a plotter - an HP DesignJet 800 with built in network print controller. It's all assembled and connected to the network, but for one thing. It doesn't work. I've reinstalled it multiple times, trying to use the installer from my workstation, but the thing insists on assigning itself an IP address that is already in use on the network! The installer allows the option to assign an IP address manually, but it doesn't work - the automatically chosen address sticks and cannot be overridden.
I know that, in the past, the HP JetDirect system has been an unreliable nightmare for admins, but I thought that had been resolved. Can anyone suggest a way to make this thing work correctly?
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
Check the manual or manufacturer website if there is any knowledge base (KB) relate to your plotter.
|
|
|
|
|
It's still a nightmare to configure these things! 
In the past, I've sometimes found it necessary to create a local network with just a PC and the JetDirect connected to each other to get the config straighted out using JetAdmin. Disable everything you're not using, like AppleTalk, DLC and IPX. Disable the Config options you're not using, like EWS Config, Telnet Config and SLP Config.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
I had to do a bit of jiggering, but I finally got the front panel to respond and let me into the configuration menu. I've got it set up as a standalone network device, with the drivers installed on individual PCs using network ports. I must say, it's a very nice printer, now that it works!
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
It sounds like it. I haven't played with a large-format printer/plotter in quite a long time.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Try to check this product[^]. It is a router with built-in print server.
|
|
|
|
|
In a certain cache system, the modified cache block is written to main memory only when the block is replaced. All of the following are used to describe this policy except__.
A store-in B write-back C copy-back D write-through
Assume that an operating system uses a round-robin scheduler. The process's quantum is 20msec, and the context switch is 5 msec. What percentage of the CPU's time is spent on administrative overhead?__.
A 5% B 15% C 20% D25%
Which MS-DOS command is correct?__
A DEL /S*BAT
B DEL *.EXE/SP
C DEL *.OBJ>NUL:
D DEL *.com*.sys
-- modified at 18:27 Saturday 12th August, 2006
I love this web
|
|
|
|
|
And how much are you paying for us to do your homework for you?
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
This is not my homework.I know the final answers, because they are
behind the questions , but I don't know why?
I examined many books, but had not found the solution.
I love this web
|
|
|
|
|
Prove it by posting the correct answers. Then someone might help.
|
|
|
|
|
gdoupanguoqing wrote: This is not my homework.
Believe me! We know what homework looks like. Especially when you copy-and-paste it word-for-word!
gdoupanguoqing wrote: but I don't know why?
You didn't mention any of this in your original post. The only place you didn't look is the book your using in your class. If you looked there and couldn't find the answer, you're other best option is to ask the prof teaching the class.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
My major isn't computer and I study computer in myself.It is difficult to find a teacher to ask.
I thought I can find solution in good time for posting the questions,but I don't think so now.
Why don't believe me ? Are American students often lie?
I love this web
|
|
|
|
|
It's not just American students. We get questions like this from all over the planet.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
I am a rookie at the computers and wanted to know what does it means when we say 16-bit windows or 32-bit windows or 32-bit x64 windows or IA64 version of windows. please anybody answer my question.
|
|
|
|
|
How many time are you going to ask the same question in one day?? It's rude, don't do it. This, like many other forum-based sites out there are an all-volunteer effort. Everybody answers whatever questions we can in the time that we have, so be patient.
By the way, this also reeks of a homework assignment...
16-bit Windows doesn't exist anymore. It refers to the VERY old Windows 3.x and below.
32-bit Windows starts with Windows 95 and Windows NT 3.x and proceeds through present day XP, Server 2003, and the upcomming Vista.
As for the rest, you can Google it yourself. Better yet, look it up on Wikipedia. You'll find stuff like this[^] on Windows XP x64.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Dave Kreskowiak wrote: How many time are you going to ask the same question in one day?? It's rude, don't do it. This, like many other forum-based sites out there are an all-volunteer effort. Everybody answers whatever questions we can in the time that we have, so be patient.
Don't blame him.
Dave Kreskowiak wrote: 16-bit Windows doesn't exist anymore. It refers to the VERY old Windows 3.x and below.
32-bit Windows starts with Windows 95 and Windows NT 3.x and proceeds through present day XP, Server 2003, and the upcomming Vista.
If you know the answer, why you don't post this answer for his previous post? He ask again because he need the answer from this forum and his previous post do not have any person give him the answer. He should be blame when he post the question again when he already get the answer.
|
|
|
|
|
Roath Kanel wrote: Don't blame him.
Why not? Did he have his sister repost the same question in the same day?
Roath Kanel wrote: If you know the answer, why you don't post this answer for his previous post?
Because I'm not answering the same question twice.
Roath Kanel wrote: He ask again because he need the answer from this forum and his previous post do not have any person give him the answer.
He didn't get an answer the first time because noone got around to answering him! Besides, this is stuff that is easily found on the 'Net with a couple of simple Googles.
Remember, this place is an all volunteer effort. We answer what we can, when we can. If that's not good enough for you, well, ...
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Dave Kreskowiak wrote: Why not? Did he have his sister repost the same question in the same day?
Where?
Dave Kreskowiak wrote: Because I'm not answering the same question twice.
Do you already give him the answer? If yes, where?
Dave Kreskowiak wrote: He didn't get an answer the first time because noone got around to answering him! Besides, this is stuff that is easily found on the 'Net with a couple of simple Googles.
If google could solve all the problem, so there is no need to have a code project forum to make people sharing an idea with each other 
Dave Kreskowiak wrote: Remember, this place is an all volunteer effort. We answer what we can, when we can. If that's not good enough for you, well, ...
He did not force the other people to answer him. In his case he just need the answer to solve the problem that seem urgent for him but he didn't force the other people. STOP BLAME THE OTHER PEOPLE...
|
|
|
|
|
Roath Kanel wrote: Where?
3rd post down from this one.
Roath Kanel wrote: Do you already give him the answer? If yes, where?
I didn't say I did.
Roath Kanel wrote: If google could solve all the problem,
I didn't say Google could solve all problems. Google just solves the easy ones, like looking up the definition of a term! Instead of just giving him the answers, I told him how to find his own. If that's rude or obnoxious of me, I'm moving to another planet!
Roath Kanel wrote: He did not force the other people to answer him.
I blamed him for violating forum etiquett, which is not CodeProject specific. Reposting the same question again and again is rude, no matter what forum or newgroup your on.
-- modified at 9:46 Saturday 12th August, 2006
-- modified at 9:48 Saturday 12th August, 2006
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Dave Kreskowiak wrote: 3rd post down from this one.
Ok, I also see this post before but this post do not have any answer for him. So that is why he post it again and expect to get the answer for him.
Dave Kreskowiak wrote: I didn't say I did.
But in your previous post, you mention that you won't answer twice. It seem that you already give him the answer on the first post and he ask again. But on the first post, you didn't give him the answer. You blame him, then you give him the answer, this is not a good solution. If you know the answer why you didn't give him on the first post. Sometime people urgent at work or other issue and need the solution or advice to solve the problem, and post twice time, because he need the solution. Not force the other people to answer him. I also used to meet answer for people that post many time, but my solution is give the answer to the first post and the other post that have the same question, i will give a hyperlink for them to the post that I give the answer. That is enought. Do not need to blame the other people and make them upset.
Dave Kreskowiak wrote: I didn't say Google could solve all problems. Google just solves the easy ones, like looking up the definition of a term! Instead of just giving him the answers, I told him how to find his own. If that's rude or obnoxious of me, I'm moving to another planet!
I know that google could do that, but people are not the same. Sometime you thing is question is to simple for you but it is very hard for the other people that is the beginner. According to your background, I know that you have a lot of knowledge and experience in IT. But you should know that people are difference, that we classified a novice, professional, expert, guru... I blame you because i just want you to give a good solution for the other people. I didn't hate you or want you to move to another planet. We must have a good solidarity in order to support each other. Do you agree with me? ![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
|
|
|
|
|
Roath Kanel wrote: But in your previous post, you mention that you won't answer twice. It seem that you already give him the answer on the first post and he ask again.
He asked again in the same 24 hours. That's not enough time for us to get around to his question. It's plain rude, simple as that. You don't get to EXPECT an answer in a forum environment--especially one where you're not paying for the service! He has no right to expect an answer at all!
Roath Kanel wrote: I know that google could do that, but people are not the same. Sometime you thing is question is to simple for you but it is very hard for the other people that is the beginner
I didn't say I was blaming him for asking a simple question. I said he violated normal etiquette for posting the question twice. I did him a favor by partially answering his question, then showing him how to find the rest of the answers on his own. This skill alone is far more valuable than the answer to question itself.
You can go spoon feed someone all you want. But you're not really teaching them anything they need to know to survive the next question they've got.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
