|
TelNo.Replace("-", "");
TelNo.Replace("(", "");
TelNo.Replace(")", "");
this will remove ALL "(", ")" and "-" from the string.
|
|
|
|
|
Thank you.
I would never have thought about using replace. I thought i would be something to do with the "Trim().IndexOf"....
Thank you for your time.
"Many of life's failures are people who did not realize how close they were to success when they gave up." Thomas A. Edison
|
|
|
|
|
Another way to do it would be to go through the entered string, character-by-character, and add only the numbers to a StringBuilder. When your done searching the string, just call the StringBuilder's .ToString method to return the entered number, sans all the seperation characters and formatting. With this method you get the flexibility of using any seperation characters you want and support for freeform entry of the number.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Hi:
I am trying to serialize/deserialize a datatable in chunks (say every 10,000 records of a 250,000 record table) using the filemode.append functionality of the binary formatter stream object as follows:
dt.RemotingFormat = SerializationFormat.Binary;
BinaryFormatter formatter = new BinaryFormatter();
Stream output = new FileStream(path, FileMode.Append, FileAccess.Write, FileShare.Write))
formatter.Serialize(output, dt);
This serializes the file to disk just fine. I can watch the size of the resulting disk file increase with each chunk added.
When I attempt to deserialize the file, I only get the first chunk (1st 10,000 records) of data from the datatable and the rest is apparently ignored. Looking at the file in a hex editor, I can see header records for each appended set of records. I believe that the multiple headers are the problem.
I know I have to be overlooking something simple. If you have seen this or solved this, please tell me what I need to do.
Thanks for your time.
John
|
|
|
|
|
Hi,
I have also experienced this. The problem lies in the deserialization of the DataTable. Somehow when deserializing a DataTable it somehow reads some more bytes from the next object in the stream thus destroying the next deserialization step. This not only occurs when using several DataTables but also when you just append some other information after a DataTable. One workaround would be to save your tables in different files. The other possibility would be to add some more custom information to the stream:
Saving:
1. Serialize the table into a MemoryStream.
2. Append the length of the MemoryStream (a simple integer should be alright) to your FileStream.
3. Append the contents of the MemoryStream to the FileStream.
Repeat 1-3 for every DataTable.
The resulting file should logically look somehow likes this:
<Length from Table1><Data from Table1><Length from Table2><Data from Table2><Length from Table3><Data from Table3>...
Loading:
1. Open the FileStream.
2. Deserialize an integer giving you the length of the next DataTable.
3. Deserialize the DataTable.
4. Adjust the Position property of the FileStream to match the length you read at point 2.
Repeat 2-4 for every DataTable (or just until the FileStream is empty).
Robert
|
|
|
|
|
Thanks for the help.
Your suggestion did the trick. Didn't need to mess with the position as it was where it needed to be for the next deserialization.
Thanks again.
|
|
|
|
|
i want to make report that will open DataBase and read two colum
as (select tblUsrs.grad from tblUsrs)
i want to display label with (exlent, very good,good) by use the tblUsrs.grad from tblUsrs
plz how can make this ........
Palestine
|
|
|
|
|
Hi,
I made a event handler for a serialport. This event handler is meant for response from the device which is attached to the serialport.
This is how the event hander looks like:
public static void ReplyOnDataReceived(object sender, SerialDataReceivedEventArgs e)
{
buffer += serialPort.ReadExisting();
}
Im using thread.sleep() at the moment. But this is not very trustworth.
So now i wanna use an event handler, for instance if it receives response from the device attached on the serialport, than go on with the program.
Hope you guys can help me.
Thanks in advance!
|
|
|
|
|
I have DataGridColumnStyle-s assigned to my datagrid. The columns are filled with data. How can I insert the data of a single column to a SQL Server database? I have inserted the data of a column into a SortedList, so I want to insert these values using the Insert statement to a CommandText property of the SqlCommand class??? 
|
|
|
|
|
you could do it like this or by using a sql/odbc/oledb datadapter (e.g. system.data.oledb.oledbdataadapter) and set it up. this is a bit more complicated and i used it only once so you should go and google for it. the msdn has some nice explaination about how to use this thing. if you want to do it by yourself, you will have to have an array (or list or anything else) containg the values and the fieldname (a 2-dimensional array would do the job 
if you got a table consisting of 3 columns (e.g. id, name, postdate) you would need an array like this:
data[0,0] = "id";<br />
data[0,1] = 0;<br />
data[1,0] = "name";<br />
data[1,1] = "myname";<br />
data[2,0] = "postdate";<br />
data[2,1] = "2006-05-02";<br /> (alternatively you could use 2 single array, one holding the column names and the other one holding the column values)
it would be easy to generate the statement then - it could look like
string sqlquery = "INSERT INTO tablename (";<br />
string comma = "";<br />
<br />
for (int i = 0; i < data.GetLength(0)-1; i++)<br />
{<br />
if (i > 0)<br />
comma = ","<br />
sqlquery = sqlquery + comma + data[i,0];<br />
}<br />
<br />
sqlquery = sqlquery + ") VALUES (";<br />
<br />
for (int i = 0; i < data.GetLength(0)-1; i++)<br />
{<br />
if (i > 0)<br />
comma = ","<br />
sqlquery = sqlquery + comma + "'" + data[i,1] + "'";<br />
}<br />
<br />
sqlquery = sqlquery + ");";<br />
this code would produce a query like
<br />
INSERT INTO tablename (id,name,postdate) VALUES ('0','myname','2006-05-02');<br />
since this can be a lot of work you should make yourself familiar with the dataadapters 
|
|
|
|
|
Thanks many!
|
|
|
|
|
yeah and maybe take a look at concurrencymanager.
Tom Wright
tawright915@gmail.com
|
|
|
|
|
Hello everybody,
i've been searching the forums for a similar question but wasn't successfull yet.
So i decided to ask the question by myself.
Is there ANY possibility to create a pointer in a generic class, which points to a variable of one of the specified typeparameters.
A little example
<br />
class myclass <T><br />
{<br />
unsafe T * myptr = null;<br />
}<br />
The compiler tells me he isn't able to declare a pointer of a "managed type" (I hope this is the correct translation so let me know if that doesn't make any sense)
Is there a workaround to make this pointer point to the specified address AND act like a "native" pointer (please don't tell me about a void pointer - it just doesnt work for my purposes)
____________________________________
If this should not be possible (yeah, i almost gave up ) is there a solution for my problem anyways? It's about associating some variable with another one.
<br />
public class dbTable<br />
{<br />
ulong myvar = 0;<br />
dbColumn<ulong> mycol = null;<br />
<br />
public dbTable()<br />
{<br />
mycol = new dbColumn<ulong>();<br />
mycol.MapVariable(ref myvar);<br />
}<br />
}<br />
<br />
public class dbColumn<T><br />
{<br />
public T mysecondvar;<br />
public MapVariable(ref T VarToMap)<br />
{<br />
mysecondvar = VarToMap;<br />
}<br />
}<br />
That example doesn't work of course because it will try to assign the value of "VarToMap" to "mysecondvar". When trying to retrieve "VarToMap"-address and assign it to "mysecondvar" the compiler throws out some errors too (the address wasn't meant to be the value of a ulong variable).
I want to be able to get the following output when performing this code:
<br />
dbTable mytable = new dbTable();<br />
mytable.myvar = 5;<br />
<br />
Console.WriteLine(mytable.myvar.ToString());<br />
Console.WriteLine(mytable.mycol.mysecondvar.ToString());<br />
<br />
mytable.mycol.mysecondvar = 3;<br />
<br />
Console.WriteLine(mytable.myvar.ToString());<br />
Console.WriteLine(mytable.mycol.mysecondvar.ToString());<br />
This should produce:
<br />
5<br />
5<br />
3<br />
3<br />
So i want one Variable to keep the Value and another one to point at it BUT i need to be able to specify the type of both variables (void pointer would do the job but i'm not able to retrieve or assing values to the variable its pointing to because the "=" operator wasn't defined for!)
I hope that someone has a solution for this problem (as already mentioned, i don't care about how it is realized as long as the requirements above are met)
I would like to hear any kind of comment because i'm really desperated.
If this i a bas idea at all it would be nice if you could tell me why i shouldn't do it like this...
Thanks in advance
mik
-- modified at 9:42 Wednesday 30th August, 2006
|
|
|
|
|
Dear All,
I am creating a Image Library and want to know what can the best and standard procedure to do this.
Concept is to have all the images needed by all projects (dlls and exes) in the product at a central place (in a single DLL) making it easy to distribute and maintain.
There are 2 ways of doing this.
1) Creating a new project, add all the images to it using "Add Existing Item" and set Build Action=Embeded Resource for each image.
OR
2) Creating a new project>Add new Item>Resources File and then adding all the images to it and setting Build Action=Embeded Resource for each image. Doing this will provide me a strongly typed DLL which will provide a property like access to all images. But .resx are mainly for localization. And here I am not localizing images.
My question is what is the standard way of doing this?
Do you guys know pros or cons of any of these methods?
Is anybody there knowing how Microsoft do it??? (When they need to create an image library)
Any links or articles for this?
Most important is, will the second (2) way will have any negative effect on start up time?
Regards,
----------------------------------------------------------------------------------
Jayvardhan Patil.
|
|
|
|
|
I have an application whose shortcut is placed on the desktop. Now whenever i double-click that icon, I want to get the information for that icon like Icon name, Icon target path, Icon working directory. The reason behind this is from one of the functionality the working directory changes for the application. So through Windows API or in C#/C++ I want to change the working directory for the icon which is double-clicked.
Plz guide me soon and at the earliest, if possible.
Regards.
Chilly
|
|
|
|
|
System.Drawing.Icon.ExtractAssociatedIcon(String) might be helpful. Peeking inside it with Reflector should be even more halpful.
|
|
|
|
|
Dear users,
I have the following XML:
<name>MyName</name>
<descr>MyDesc</descr>
So the serialisation in C# would be:
[XmlElement("name")]
public string Name
{
get { return name; }
set { name = value; }
}
[XmlElement("descr")]
public string Descr
{
get { return descr; }
set { descr = value; }
}
But what if I have this?
<name>MyName</name>
<descr pos="after" type="string">MyDesc</descr>
Is the above possible to be serialised?
Thank you very much.
Regards,
Steven
-- modified at 5:52 Wednesday 30th August, 2006
|
|
|
|
|
hi,
have a look at System.Xml.Serialization namespace. You'll find what you need there
Do your best to be the best
|
|
|
|
|
Thanks karkster.
I have looked actually. However, the best I could find is how to serialise this:
<descr pos="after" type="string" val="MyDesc" />
which is not what I want like this:
<descr pos="after" type="string">MyDesc</descr>
|
|
|
|
|
is it possible to add a folder in a tree view, if i drag and drop a folder from my desktop or local drives to my application tree view control.
Plz help me... if it is possible? how i have to proceed....
thanks in advance.........
|
|
|
|
|
Hi ,
Am new to Graphics and Imaging.
i tried to draw a *.jpg image[which is a MRI image of human brain] using SetPixel(..).
But while executing its throwing exception as "SetPixel is not supported for images with indexed pixel formats".
What does it actually mean and how can i resolve it?
Thanks
|
|
|
|
|
Hi,
Vsree wrote: i tried to draw a *.jpg image
what do you mean by drawing a jpg image? Do you want to draw pixel by pixel in your application and save as a jpg or do you want to display a jpg?
Do your best to be the best
|
|
|
|
|
Actually i tried to load an JPEG image from file and set its pixel color to a new value and redraw it using Graphics object and save it in the file.
<br />
Color c;<br />
for ( int x=0; x<imgDefault.Width-1; x++ )<br />
{<br />
for ( int y=0; y<imgDefault.Height-1; y++ )<br />
{<br />
c = imgDefault.GetPixel( x, y );<br />
c = Color.FromArgb( c.ToArgb() + 100 );<br />
imgDefault.SetPixel( x, y, c );<br />
}<br />
}<br />
pe.Graphics.DrawImage( imgDefault, 0, 0 );<br />
I loaded a MRI Scan image of human brain and tried to do the above work,
which threw error as:"SetPixel is not supported by Indexed pixel format"
What does it mean?
Please help me
|
|
|
|
|
SetPixel doesn't work with images with indexed pixel format. Try copying your image to a new bitmap pixel by pixel and make your changes on that bitmap
Do your best to be the best
|
|
|
|
|
Try this:
Image imgDefault;
Bitmap imgSaveForSetPixel = new Bitmap(imgDefault.Width, imgDefault.Height);
using (Graphics g = Graphics.FromImage(imgSaveForSetPixel)) {
g.DrawImageUnscaled(imgDefault, 0, 0);
}
Robert
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
