|
I want to make buttons on toolbar labeled 1,2&3 and use them to view these frames jst like the file list in window menu tab is used, it shows the windows that are opened and when u click on anyone it is focused and displayed on top. My application has only these 3 frames and no new document is to be made.
If you can give some sample code it would be great,
Thank you
|
|
|
|
|
I'm assuming you are using Doc/View MDI.
The first created MDI child window has id == AFX_IDM_FIRST_MDICHILD, second is
AFX_IDM_FIRST_MDICHILD+1, etc.
So, with only 3 child frames...
ON_COMMAND(ID_MYBUTTON1, OnButton1)
ON_COMMAND(ID_MYBUTTON2, OnButton2)
ON_COMMAND(ID_MYBUTTON3, OnButton3)
...
void CMainFrame::OnButton1()
{
CWnd *pWnd = GetDescendantWindow(AFX_IDM_FIRST_MDICHILD);
if (pWnd)
MDIActivate(pWnd);
}
void CMainFrame::OnButton2()
{
CWnd *pWnd = GetDescendantWindow(AFX_IDM_FIRST_MDICHILD + 1);
if (pWnd)
MDIActivate(pWnd);
}
void CMainFrame::OnButton3()
{
CWnd *pWnd = GetDescendantWindow(AFX_IDM_FIRST_MDICHILD + 2);
if (pWnd)
MDIActivate(pWnd);
}
|
|
|
|
|
Thnkx Man you have helped me a lot, actually i am a fresher only one week of exp so did'nt had the knowledge. You have to help me further as you did today
thanx once again....
|
|
|
|
|
Hi.
There is only one control in a dialog thats the Edit control. This is set as Multilined and read only. My problem is that whenever this dialog is hown the I beam cursor appears when the mouse is over the edit control.
I dont want this to happen as well the focus shouldn't be on the edit control.
Why i want this is because it should appear like a static control but with scrol bars.
Sunil
|
|
|
|
|
hi,
Use EditControl->SetFocus(-1);
May this solution may solve your problem.
Uday kiran
|
|
|
|
|
am using visual studio 2003.. so SetFocus doesnt take any parameters..
any other suggestion
Sunil
|
|
|
|
|
You can override CEdit::OnSetCursor(...) on the edit control to prevent the I-Beam cursor from being used and leave it as an arrow cursor.
You can override CEdit::OnSetFocus(...) to cause focus to automatically go to the next control - get the next control in the Z-Order and call SetFocus() on it (do not go to the previous control, otherwise tabbing through controls will not work correctly).
Note that if the user cannot focus the control, they might not be able to use the scrollbars.
Peace!
-=- James
If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
DeleteFXPFiles & CheckFavorites (Please rate this post!)
|
|
|
|
|
Hmmm.. ya that i do know..
ok is there a method to display text in a static control with a scroll bar.. or get to know the rect size needed to display the static text. i.e. once no. of chars in static text will be 100, but the next time the no. chars in static text will be 300.. so how do i change the size of rect by manipulation.
thats y i needed a edit control with a scroll bar without showing the I beam cursor when the cursor is over the edit control. I hope u got my problem now. I am not supposed to have any separate class for this purpose. And there is only one control in this dialog. So no point in setting the focus to something else.
Sunil
|
|
|
|
|
Hi.
I want to move a picture control withouth redrawing the whole window. I've searched on how to do it and i've seen several techniques, but i think that the easiest for me is by invalidating the rectangle i want to update.
So, i do something like this:
CRect rect1,rect2(200,200,300,300);
m_picture.GetWindowRect(rect1);
m_picture.MoveWindow(rect2,FALSE);
InvalidateRect(rect1);
InvalidateRect(rect2);
Where m_picture is my picture control. It seems that it redraws the new position, but it doesn't erase the old one (so, there are two pictures in the window). Of course, invalidating the whole window works, but i just want to update that zone.
I've tried using ClientToScreen and ScreenToClient, in case the coordinates were wrong, but with no success.
Somebody can help me?
Thanks in advance,
Rad.
|
|
|
|
|
Is CRectTracker Class helpfuls?
|
|
|
|
|
I've tried to use it, but i don't really need it (i just want to do a small animation, and i don't want to spend too much lines of code on it).
And, in the end, the problem is still the same, how to update the zone (how to invalidate that rect).
|
|
|
|
|
I am presuming you used ScerenToClient relative to the PARENT window, and not the picuture window?
This really should work, I think you still have a bug in your coordinates to the InvalidateRect.
Also, I think InvalidateRect on the child window's new position is redundant, as the MoveWindow already invalidates the destination for you, assuming you allowed the paint to occur:
If the bRepaint parameter is TRUE, the system sends the WM_PAINT message to the window procedure immediately after moving the window (that is, the MoveWindow function calls the UpdateWindow function). If bRepaint is FALSE, the application must explicitly invalidate or redraw any parts of the window and parent window that need redrawing.
Any sufficiently gross incompetence is nearly indistinguishable from malice.
|
|
|
|
|
Hi all
I want to get HBITMAP from JPEG/JPG Resource in MFC/ATL/Win32 using IStream.I don't want to use IPicture or IPicDisp interface since they use Picture Control.
Any links or Code snippet would do fine ..
Thanx in Advance
"Every morning I go through Forbes list of 40 richest people in the world. If my name is not in there, I go to work..!!!"
|
|
|
|
|
Do you need to CImage::Load(IStream* pStream)
|
|
|
|
|
hi all,
how to access a COM component developed in vc++6.0 from ASP.net?
what r the issues need to be considered in this case??
Thanks in advance.
Prashanth.v
|
|
|
|
|
Hello
I am using the STL function for_each as outlined below
<br />
CheckAccount::~CheckAccount()<br />
{<br />
for_each(translist.begin(), translist.end(), del_t);<br />
}<br />
<br />
and I understand the arguements as
translist.begin() = the 1st element of the list called translist
translist.end() = the last + 1 element of the list called translist
del_t = helper function and is defined as
<br />
<br />
inline void del_t(Transaction* tp){ delete tp; }<br />
in the same class.
My question is, why do you not use del_t() in the for_each loop. Since you are invoking a function I would have thought you need the (). I find that the above definition of the for_each loop works fine. But if I define it as
<br />
for_each(translist.begin(), translist.end(), del_t());<br />
I get an error. I have had a look on google and sometimes you use the () and sometimes you don't. Also I think that the 3rd argument of for_each (where there is del_t in this case) can be a class? But I dont understand why. Can you please provide me with an example of that?
Thank you for your time.
|
|
|
|
|
If you add parentheses after a function name, that function will be evaluated, and the result will be the actual parameter. If omitted, it is the function itself that is sent as a parameter.
You can use an object, a functor, in the for_each call. The class needs to implement the operator() accordingly.
|
|
|
|
|
I have been running through my code trying to figure out why my GDI handle count is so high ( best was 400+ ). A point to note here is that there are no GDI leaks. Here is an snippet of the cause
HRGN hRgn = CreateRectRgnIndirect(&rc);
DeleteObject(hRgn); This particular segment is called 5 times on window creation, then 5 times for each WM_SIZE. The region is deleted so the count doesn't keep growing when the window is being sized, but on creation (the first 5 calls), the count never decreases after deletion.
Is this a problem with my code?
|
|
|
|
|
Are the GDI objects still selected into a dc when you delete them?
HRGN hRgn = CreateRectRgnIndirect(&rc);
HGDIOBJ hOldRegn = SelectObject(hdc, hRgn);
...do something with the dc...
SelectObject(hdc, hOldRegn);
DeleteObject(hRgn);
|
|
|
|
|
Most of the objects are HRGN and are only created to calculate various regions. They are never selected into the DC. Those that are, mainly HBITMAP and HPALETTE are removed before being deleted. I'm wondering if this is some functionality of VS8 to aid in debugging or whatever, I never had a problem like this with VC6.
|
|
|
|
|
Hi everybody,
Is it possible to open a CDialog from a MDI Child ( CFormView ) ?
If i open the CDialog, the Create returns always FALSE 
WinTEdit Help(this);
if(!Help.Create(IDD_WINTEDIT,this))
int error = 1; // Steps always here in
Help.ShowWindow(SW_SHOW);
WinTEdit is a CDialog derived-class
Thanks 
|
|
|
|
|
I think you asked this question did you see my reply?
|
|
|
|
|
Yes, thanks, but the thread is few pages away, so nobody can see it anymore
i wrote :
WinTEdit::WinTEdit(CWnd* pParent /*=NULL*/)
: CDialog(WinTEdit::IDD, pParent)
{
Create(WinTEdit::IDD,pParent);
}
causes the same problem
It's seriously possible to open a CDialog in a MDI-Project, or not?
Or isn't it possible to open a CDialog with a "CFormView"-Parent?
So that only the mainform could open the CDialog...
Thanks
|
|
|
|
|
What happens when you run this code
|
|
|
|
|
ooooooowkay !!
I removed the Rich Edit 2.0 from the Dialog and now i dont have an arror 
Does this control has an error ? 
Thanks !! 
-- modified at 6:33 Monday 30th October, 2006
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
