C / C++ / MFC

FirstPrevNext

Re: ctypedptrarray Christian Graus12-May-02 13:06 Christian Graus 12-May-02 13:06  I can't help much because I am not afflicted with crappy Microsoft containers, I use the STL. However - Win wrote: //ignore ' coz i don't have it on my application. ' is only for < to show on this site. You can use ampersand ( shift 7 ) and lt or gt to get the < > symbols, or check the box below that says to display the message as-is. Christian The tragedy of cyberspace - that so much can travel so far, and yet mean so little. And you don't spend much time with the opposite sex working day and night, unless the pizza delivery person happens to be young, cute, single and female. I can assure you, I've consumed more than a programmer's allotment of pizza, and these conditions have never aligned. - Christopher Duncan - 18/04/2002 Help With A Matrix. nywebhead12-May-02 11:19 nywebhead 12-May-02 11:19  Okay, read this. "Enter a 5x6 matrix. Print the original matrix and then print the transpose of the matrix, and the reverse of the matrix." I was handed that and I have no idea what to do. If anyone could send post some sample code to give me an idea of what to do, I'd greatly apprciate it. Thanks. This stupid thing is due tomorrow. Send mail to nywebhead@hotmail.com if you can help. Thanks again, Mik Re: Help With A Matrix. Christian Graus12-May-02 11:33 Christian Graus 12-May-02 11:33  A matrix is the same as a two dimensional array. Do you know what that is ? Your teacher obviously thinks you should. Christian The tragedy of cyberspace - that so much can travel so far, and yet mean so little. And you don't spend much time with the opposite sex working day and night, unless the pizza delivery person happens to be young, cute, single and female. I can assure you, I've consumed more than a programmer's allotment of pizza, and these conditions have never aligned. - Christopher Duncan - 18/04/2002 Re: Help With A Matrix. nywebhead12-May-02 11:57 nywebhead 12-May-02 11:57  Two Dimensional array....hmmmmm.....never heard of it, but I'll look it up. Thanks Christian. Re: Help With A Matrix. nywebhead12-May-02 14:12 nywebhead 12-May-02 14:12  Ok, when I enter the below code, it says, subscript requires array or pointer type. What does that mean? #include<iostream.h> int r,c,x; int a[100][100]; int b[100][100]; main(){ a[0][0] = 10; a[0][1] = 11; a[1][0] = 15; a[1][1] = 21; b[0][0] = 10; b[0][1] = 11; b[1][0] = 15; b[1][1] = 21; for (r=0; r<=4; ++r){ for (c=0; c<=5; ++c){ cout< Re: Help With A Matrix. Nish Nishant12-May-02 15:04 Nish Nishant 12-May-02 15:04  nywebhead wrote: cout<<x[r][c]<<" ";<="" i=""> x is an integer. Use a or b which you have declared as 2-d arrays Nish Regards, Nish Native CPian. Born and brought up on CP. With the CP blood in him. Re: Help With A Matrix. nywebhead12-May-02 15:58 nywebhead 12-May-02 15:58  Thanks, I figured it out. Geez, this is tedious. Re: Help With A Matrix. Nish Nishant12-May-02 17:12 Nish Nishant 12-May-02 17:12  nywebhead wrote: Geez, this is tedious. LOL Don't worry. It'll get easier as you progress Nish Regards, Nish Native CPian. Born and brought up on CP. With the CP blood in him. How do I change the color of a button. 12-May-02 10:56 12-May-02 10:56  Changing the colors of buttons, and edit boxes is easy with Visual Basic, but I've grown up and am now using Visual C++. The problem I have now is that I have no clue on how to change the color of buttons and edit boxes. Please, Gurus and Masters of C++, please almighty gods, tell me how I can do this. I will worship at your feet if I get a response. I am repentant of my VB ways and am now bowing before you. Re: How do I change the color of a button. Neville Franks12-May-02 11:29 Neville Franks 12-May-02 11:29  You would either add a handler for OnCtlColor or make the button Owner Draw. Also look at: http://www.codeproject.com/staticctrl/coloredit_colorstatic.asp http://www.codeproject.com/staticctrl/clabel.asp Instead of using an Anonymous post you might like to Register here at CP which makes us CP regulars happier. Neville Franks, Author of ED for Windows. www.getsoft.com Re: How do I change the color of a button. Nish Nishant12-May-02 15:06 Nish Nishant 12-May-02 15:06  Neville Franks wrote: Instead of using an Anonymous post you might like to Register here at CP which makes us CP regulars happier. The bad thing about anonymous posts is that you dont get mail notifications Nish Regards, Nish Native CPian. Born and brought up on CP. With the CP blood in him. Capturing KeyStrokes 12-May-02 9:56 12-May-02 9:56  I wish to capture keystrokes much like hot keys. Instead of setting up buttons with captions like &0Zero, &1One, ... &9Nine. I would like to be able to capture keystrokes like ALT 0, ... ALT 9. I guess the PreTranslate() is the right place to do this. My question is how do I tell that both the ALT key is down when the 0 key was pressed? Please point me in the right direction. Thanks Re: Capturing KeyStrokes Michael Dunn12-May-02 10:21 Michael Dunn 12-May-02 10:21  If your app is SDI or MDI, just create accelerators for those keystrokes. --Mike-- Buy me stuff! (Link fixed now) Like the Google toolbar? Then check out UltraBar, with more features & customizable search engines! My really out-of-date homepage Big fan of Alyson Hannigan and Jamie Salé. Sonork - 100.10414 AcidHelm Re: Capturing KeyStrokes Nish Nishant12-May-02 15:09 Nish Nishant 12-May-02 15:09  Michael Dunn wrote: If your app is SDI or MDI, just create accelerators for those keystrokes. Adding to what Mike said. If it a dialog based APP, you can read this article which shows how to have accelerator keys working in a dialog based app :- http://www.codeproject.com/useritems/pretransdialog01.asp Nish Regards, Nish Native CPian. Born and brought up on CP. With the CP blood in him. How to store a c constant in an int variable Sam M C12-May-02 9:50 Sam M C 12-May-02 9:50  For the life of me I can't remember how to do this... I am creating my own file format for a hobby application I'm working on and I am trying to remember how to store a 'C' constant string in an integer variable. I have a dummy header for now defined as: <br /> struct Header {<br /> int Identity; //Store "SAM1" here<br /> int Version; //Store 1 for now<br /> };<br /> I then proceed to store info but when I try to store SAM1 it doesn't seem to store everything. I'm just a little confused and don't remember how to do this, any help would be greatly appreciated. Or, any other method you suggest to store a string in the header file would be appreciated as well. Thanks in advance. Sam ---- "No special sig just plain old Sam..." Re: How to store a c constant in an int variable Maxwell Chen12-May-02 10:11 Maxwell Chen 12-May-02 10:11  If the storage of id is limited in 4 letters, this way would do: struct Header { int Identity; //Store "SAM1" here int Version; //Store 1 for now }; Header hh; memcpy(&hh.Identity, "SAM1", 4); But I don't think int a good choice for the case... Maxwell Chen People say "No news is good news". Then, no code is good code!? Re: How to store a c constant in an int variable Sam M C12-May-02 10:25 Sam M C 12-May-02 10:25  Thanks for the heads up I would of never guessed that even after seeing the answer I don't remember that What would you suggest be the best use? Thanks. Sam ---- "No special sig just plain old Sam..." Re: How to store a c constant in an int variable Maxwell Chen12-May-02 15:33 Maxwell Chen 12-May-02 15:33  From all the other source, mostly the source for the MD2 file format stores this type of information int an 'integer' variable. Originally I would suggest you to use char array, but after having seen your answer to Michael, I couldn't imagine any other methods. Maxwell Chen People say "No news is good news". Then, no code is good code!? Re: How to store a c constant in an int variable Michael P Butler12-May-02 11:29 Michael P Butler 12-May-02 11:29  I don't get it. Why would you want to store a string in an integer? You could only store a pointer to character array, which would be meaningless when read back in? What's wrong with a good old char[4]? Michael Communication is the first step towards enlightenment. Re: How to store a c constant in an int variable Sam M C12-May-02 13:34 Sam M C 12-May-02 13:34  I don't know. I am writing a 3D application and have the file format. From all the other source, mostly the source for the MD2 file format stores this type of information int an 'integer' variable. I myself do not know why John C uses an int and not char[4] or char[5] if accomadating for the '\0'. Sam ---- "No special sig just plain old Sam..." Re: How to store a c constant in an int variable Jon Hulatt12-May-02 22:06 Jon Hulatt 12-May-02 22:06  It's highly dangerous to do this. You are relying on an int being 32 bits, which it isn't necessaryily. What if MS changed int to a 64bit in a future release? you're app would not load data correctly most probably. Signature space for rent. Apply Within. Re: How to store a c constant in an int variable Sam M C14-May-02 13:55 Sam M C 14-May-02 13:55  Actually this is a good point. Or, you can typedef or explicitly define an int being 32 bits. But this is something I think John C would have thought of I wonder why he used this as an ID value?!?! I'm puzzled. Sam ---- "No special sig just plain old Sam..." Adding a new registry VALUE albean12-May-02 8:23 albean 12-May-02 8:23  Hi, I'm trying to add a new string value under an existing registry key. I see the APIs to delete , enum and set a value but I just can't figure out how to add a NEW string value under an EXISTing key. Please help. Thanks! This is what i've tied but it creates a KEY and not a VALUE under "Info" if(RegOpenKeyEx( HKEY_LOCAL_MACHINE, "SOFTWARE\\BFW\\SampleTool\\Info", 0, KEY_ALL_ACCESS, &hkey )==ERROR_SUCCESS) { if(RegSetValue(hkey,"Info",REG_SZ,"Test",5)==ERROR_SUCCESS) I'd like to see Test appear as a REG_SZ under the Info Key. Re: Adding a new registry VALUE Brian Delahunty12-May-02 8:52 Brian Delahunty 12-May-02 8:52  Have a look at: http://www.codeproject.com/system/cregisterex_svl.asp http://www.codeproject.com/system/cregistrykey.asp "Isn't that the "write once, debug everywhere" language?" Tom Archer on Java... Re: Adding a new registry VALUE albean12-May-02 9:16 albean 12-May-02 9:16  RegSetValueEx(hkey,"Test",0,REG_SZ, NULL,NULL) Did the trick. Thanks.

Last Visit: 31-Dec-99 18:00     Last Update: 23-Sep-24 16:17 Refresh ᐊ Prev1...16963169641696516966169671696816969169701697116972 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.