|
Translation: we wrote really WTFable code and it would be impossible to actually port over in a reasonable fashion.
--
Rules of thumb should not be taken for the whole hand.
|
|
|
|
|
If you're going to get a new NIC card, check out the ones that plug into a PCIe-1X slot. They should have 64-bit drivers...
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997 ----- "...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
Hi everyone,
I'm trying to turn off a USB device power, theoretically, the USB spec states it is possible.
<some background=""> On Intel chipset disabling the "USB root hub" will cut the connected USB devices power, I know that with Ali and Via chipsets (and probably others) its not the case.. the device will enter sleep mode instead.
The only thing I've been able to find is restart, disable-enable, and changing the max allowed power consumption. None of the above did the trick.. before giving up completely I wanted to hear your opinion of this..
Do you know a way to Turn off a USB device power?
Thanks,
Ariel.
|
|
|
|
|
Set the max power to zero?
|
|
|
|
|
From my understanding it will not necessarily turn off the device power.. its more like a “recommendation for the hub. (i.e if a device claims its max usage is 10ma but you use 100ma it might disconnect the device)
I'm willing to test it again (on several computers) if you’ll point me to a working test application..
|
|
|
|
|
now i want to get some informations about the local Floppy Driver. the information may content Vendor ID, Product ID ... or some thing else~
can anybody give me some hint?
if C/C++ can do this tell me how, if not give me some explaination.
thanks ~~~
|
|
|
|
|
For a floppy drive? There isn't a way to do this. The Device Manager in Windows doesn't care. As far as I know, most of them come back as a Generic Drive on a Standard Controller. About the only ones that would come back with any information are the old 120MB Super Drives.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
thanks!
|
|
|
|
|
Hi there, does anyone know in what memory location I can read the CPU tempreture\fan speed. I am guesing it is a memory location, as that would be the most logical...but it could also mean that every motherboard is different. In my case I want to read this information on an IBM Anyplace Kiosk. Google has let me down...Please help!!! Thanks.
The Mac
|
|
|
|
|
crystalmac wrote: Hi there, does anyone know in what memory location I can read the CPU tempreture\fan speed
There isn't any. This is usually polled from an I/O port in the machines chipset. The location (port#) changes from manufacturer to manufacturer. It's not Google that let you down, it's IBM because they don't publish this kind of information easily.
You're best bet to to crack open the box, get the chipset manufacturer and ID information, then start Googling around for that instead. You might actually come up with a couple utilities that will return the data for you.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
I need to do this in software from C#. But after my initial search there seemed no way to do this...this was why I posted in the hardware forum because I thought would have to do it the hardway. HOWEVER it seems I am in luck, the temperature reading is implemented in ACPI and is available as a WMI object, provided the correct drivers are installed. Found a great example on this site:
http://www.cicoria.com/cs1/blogs/cedarlogic/archive/2006/11/29/404.aspx[^]
Works well on my HP laptop, but not on my desktop which has an MSI i975 motherboard which is about 3 years old... Holding thumbs it will work on the kiosk...(have not got one to test this just yet). Now I just have to find a way to get the fan speed.
The Mac
|
|
|
|
|
crystalmac wrote: HOWEVER it seems I am in luck, the temperature reading is implemented in ACPI and is available as a WMI object, provided the correct drivers are installed. Found a great example on this site:
That's right! So long as the WMI providers are installed AND that they actually provide the data you want. Sadly, most don't! From IBM, don't count it working.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
If you can find out what the BIOS for the board is you can use speedfan to get the numbers. There's an option to get user created mappings for most major mobo designs, if IBM used something wierd in the kiosk you might have to figure the locations out the hardway, but otherwise you should be good to go with it.
PS if the board's a few years old you could also try motherboard monitor, but MBM has been abandoned by the developer and doens't support newer boards.
--
Rules of thumb should not be taken for the whole hand.
|
|
|
|
|
Is the Win32_TemperatureProbe class of any help?
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
|
|
|
|
|
Only if the WMI Providers for the MoBo have been installed. Most of the manufacturers don't bother creating the providers for this stuff. Other stuff, like the motherboard and manufacturer details, yes, but not the fan and temp counters. Pity, 'cause I would like to use them myself.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
hi all.
i got a global punkbuster Hardware ban
i need help with spoof my HARDWARE i need a spoof program
i need to spoof my HD and my NIC
help plz.
|
|
|
|
|
you can buy what you need here: www.newegg.com[^]
--
Rules of thumb should not be taken for the whole hand.
|
|
|
|
|
Shouldn't have cheated in the first place. Then you wouldn't have to worry about bannings
|
|
|
|
|
I was given a machine to work on, but found that the video card (it's a VGA/S-video/DVI card with an AGP connector) was faulty. To get the machine up and running, I simply pulled the original video card out and replaced it with one of my own (it's a VGA card with a PCI connector). That all worked fine. After I got the machine done, I swapped the video cards again, and, no surprise, it did not work. I just wrote it off as a bad video card and told the owner that he simply needed to buy a replacement. He took the old video card with him to ensure an exact match. He tells me later on that the new card does not work. His LCD monitor has both VGA and DVI connectors (as does the video card) so he tried both. I looked at it again, tried both connectors, several cables, all to no avail. Each time, the monitor would simply display, "No data. Check connection." I tried my VGA video card again, and it worked fine. So...
At this point, I don't know if it's the new video card or the AGP slot on the motherboard that is bad, or if I am just doing something completely wrong. Ultimately he could just buy a VGA video card with a PCI connector and be done, but that still does not solve the mystery.
Any ideas?
- DC
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
|
|
|
|
|
Check the bios. There might be a manual setting for the video adapter to use as a primary display, and that might have changed to "PCI only" when you removed the AGP card and used a PCI card instead.
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
Thanks. I'll check the BIOS settings this evening.
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
|
|
|
|
|
As was mentioned, check the bios, especially if there is an onboard video that was disabled. Often the bios does the interchange between the onboard graphics and the AGP slot activating or deactivating one. Similarly there is sometimes a PCI slot near the AGP that is on a swap interface in bios, either-or, not both.
Strictly on the AGP side, you can set a 4X AGP to 8x only via Bios if you put an updated bios into an older motherboard, resulting in a non-functioning AGP slot due to timing irregularities from the BUS.
When you are not sure of an AGP issue, drop the timing back to 1x or 2x if available and test upward. It is possible a voltage flux on the motherboard as changed the timing on the BUS making 8x AGP unusable even on an 8x board, but 4X AGP might still be available because of the wider timing, or 2X.
_________________________
Asu no koto o ieba, tenjo de nezumi ga warau.
Talk about things of tomorrow and the mice in the ceiling laugh. (Japanese Proverb)
|
|
|
|
|
Most of this is Greek to me, Jeffry. The owner indicated that the computer used to work, but has sat idle for several months, if not longer, because it had Windows Me on it and was thus very slow and sporadic. Rather than fight with it, he just pushed it aside. He asked me if we could resurrect it by installing Windows 2000 on it. I did and it screams now (although it's a bit hard to see!).
"Approved Workmen Are Not Ashamed" - 2 Timothy 2:15
"Judge not by the eye but by the heart." - Native American Proverb
|
|
|
|
|
DavidCrow wrote: but has sat idle for several months
which is what I expected. Basically my answer was the longer version of check the bios. There are many possibilities with AGP depending on the bios and configuration. Sitting idle long enough to get an interruption in CMOS backup battery (or a "minor" static shock) would result in a default CMOS setting, factory defaults, whatever those are. That would effectively change the settings from working to possibly not working....
Also a stronger static discharge to the VGA port could A) take out a card B) take out an AGP slot.
_________________________
Asu no koto o ieba, tenjo de nezumi ga warau.
Talk about things of tomorrow and the mice in the ceiling laugh. (Japanese Proverb)
|
|
|
|
|
Jeffry J. Brickley wrote: take out an AGP slot.
an? I wasn't aware of any 2xagp boards in existance. What would the point've been. AFAIK there were no nongfx cards the used the agp bus, and PCIe predated the rebirth of SLI, so there wouldn't've been a need there either.
--
Rules of thumb should not be taken for the whole hand.
|
|
|
|