|
I've extended the PictureBox control to create my own user control. Now I want to capture the OnMouseWheel. I've done this many times, and it's usually enough to override like this
protected override void OnMouseWheel(MouseEventArgs e) . Unfortunately the overidden method is never called when I turn my mousewheel. I've also tried tying the MouseWheel even to my own method. Weird enough, this isn't called either... Could this be related to the parent control the box is placed in? Any suggestions?
Standards are great! Everybody should have one!
|
|
|
|
|
You might try creating a user control that you know has the OnMouseWheel event enabled. Another option would be to inherit from the picturebox and override its WndProc with information related to the mouse wheel.
Regards,
Thomas Stockwell
Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
Visit my homepage Oracle Studios[ ^]
|
|
|
|
|
The picture box should have this event enabled. I've tried the following and found it to be working: The form is placed within a SplitContainer control. Since I was guessing it might be the parent container that was the problem, I tried tying my method to SplitContainer.Panel1.MouseWheel event first. When this wasn't working, I tied it to SplitContainer.MouseWheel. This actually works. This seems very strange because I've always thought that events were passed from the toplevel container on to the back. The solution isn't very charming, since this means the control I made will have to be hooked differently to it's parent controls, depending on the type of parent it's placed In.
Overriding its WndProc seems like a good idea, it's just that I have no idea of how to do this. If you can give me a pointer that would be very welcome, it's almost weekend for me and I don't feel like starting it with leaving an annoying problem like this unsolved 
Standards are great! Everybody should have one!
|
|
|
|
|
I know it's 4 years too late, but I ran across this post while looking for information on the Delta values in the MouseEventArgs passed to OnMouseWheel.
The reason controls like PictureBox don't fire that event is because it doesn't have focus. An easy fix should be to override OnMouseEnter and calling the control's Focus() method. You may also need to call your control's SetStyle method and give it ControlStyles.Selectable in it's contructor.
It's probably way too late, but I hope that helps anyway. 
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end" - Unknown
|
|
|
|
|
Was surprised to see a reply to a 4 year old question that I didn't remember I asked in my inbox .
Thanks for the answer. Perhaps the problem has been haunting my subconsciousness for 4 years and is finally at peace . More likely I found a way around it back then though. Still; others may find your answer very useful, thanks again.
Standards are great! Everybody should have one!
|
|
|
|
|
SqlCommand cm = new SqlCommand("select dashboardid from dashboardlogin where (loginname = 'hina') AND (loginpswd = 'shaikh')", conn);
int i = Convert.ToInt32(cm.ExecuteScalar());
i have this query working properly,but it gives dashboardid of only loginname=hina.
but i want dashboardid of that person who logs in the system(this code is on login form),whoever logs in the system,his dashboardid must be got in variable 'i'.
what must i do to change my query for such result?
thank you.
nekshan.
|
|
|
|
|
string strQuery="";
strQuery = "select dashboardid from dashboardlogin where (loginname = '" + txtLoginName.Text + "') AND (loginpswd = '" + txtPassword.Text + "')";
SqlCommand cm = new SqlCommand(strQuery, conn);
int i = Convert.ToInt32(cm.ExecuteScalar());
txtLoginName.Text and txtPassword.Text will be your text boxes from where you will take the user name and password. This is a simple solution but creating dynamic queries are prone to SQL Injection attacks. Use Stored procedures instead or use parameterized command object. Search msdn for more information.
"A good programmer is someone who looks both ways before crossing a one-way street." -- Doug Linder
coolestCoder
|
|
|
|
|
coolestCoder wrote: This is a simple solution but creating dynamic queries are prone to SQL Injection attacks. Use Stored procedures instead or use parameterized command object.
I'm curious why you didn't just do that in your example. It seems to me to be some what disingenuous to offer a solution with known security problems then point out the problems when it would have been just as quick to write a version without those problems.
|
|
|
|
|
Nekshan wrote: but it gives dashboardid of only loginname=hina.
Duh....
Nekshan wrote: what must i do to change my query for such result?
First, don't delete your questions after they are answered.
Second, I would reiterate that the questions that you're asking, show that you need to learn some basics before tackling this project. I can see you've found that if you keep asking here, we wil write it all for you, but you will pay later for never learning a solid foundation to build on.
The obvious answer is to build a string that includes the login name and password, from the controls which were used to enter them. However, you'd do better to write a stored procedure , because this will help protect you from SQL injection attacks. A paramaterised query would be an easier way to try to protect yourself in this regard.
The highlighted words are for your help figuring out how to use google to find out more info.
Christian Graus - Microsoft MVP - C++
Metal Musings - Rex and my new metal blog
|
|
|
|
|
Read the section "Parameterized Queries" of the following CP article: SQL Injection Attacks and Some Tips on How to Prevent Them[^]. The other sections of the article are also worth reading them.
"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning." - Rick Cook www.troschuetz.de
|
|
|
|
|
Since you seem to have a history of deleting your original question, I've repoduced it here in full so that anyone else with a similar problem can see exactly what is going on.
Nekshan wrote: SqlCommand cm = new SqlCommand("select dashboardid from dashboardlogin where (loginname = 'hina') AND (loginpswd = 'shaikh')", conn);
int i = Convert.ToInt32(cm.ExecuteScalar());
i have this query working properly,but it gives dashboardid of only loginname=hina.
but i want dashboardid of that person who logs in the system(this code is on login form),whoever logs in the system,his dashboardid must be got in variable 'i'.
what must i do to change my query for such result?
thank you.
nekshan.
SqlCommand cm = new SqlCommand("SELECT dashboardid FROM dashboardlogin "+
"WHERE loginname = @loginname AND loginpwd = @password", conn);
cm.Parameters.Add("@loginname", theLoginName);
cm.Parameters.Add("@password", thePassword");
object rawId = cm.ExecuteScalar();
if (rawId == DBNull.Value)
{
// The login wasn't found - handle this
}
else
{
int id = (int)rawId;
// Do stuff with the id
}
|
|
|
|
|
|
Nekshan wrote: int s = Convert.ToString(cm.ExecuteScalar());
In C# you cannot assign a string to int. Try-
int s=Int32.Parse(cm.ExecuteScalar());
CAUTION : What if your database has a null value or some string value in the field being retrieved ? This would raise an exception in the Parse method. The best practice is to use exception handling and checking whether the returned values are not null. Also apply proper constraints on the database to avoid these kind of errors.
"A good programmer is someone who looks both ways before crossing a one-way street." -- Doug Linder
coolestCoder
|
|
|
|
|
Nekshan wrote: int s = Convert.ToString(cm.ExecuteScalar());
it gives error : Cannot implicitly convert type 'string' to 'int'.
If you want to put the return value into a integer variable, why do you convert it to a string.? Cast the return value of ExecuteScalar to int directly.
"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning." - Rick Cook www.troschuetz.de
|
|
|
|
|
Hi
Try this:
<br />
SqlCommand cmd=new SqlCommand("select employeeid from employees where employeeid=1",conn);<br />
int s = Convert.ToInt32(cmd.ExecuteScalar());<br />
funEntrylogin(s, tb_id.Text, tb_pswd.Text, DateTime.Now, DateTime.Now);<br />
hope this helps
greets
m@u
|
|
|
|
|
Nekshan wrote: int s = Convert.ToString(cm.ExecuteScalar());
In C# you cannot assign a string to int. Try-
int s=Int32.Parse(cm.ExecuteScalar());
CAUTION : What if your database has a null value or some string value in the field being retrieved ? This would raise an exception in the Parse method. The best practice is to use exception handling and checking whether the returned values are not null. Also apply proper constraints on the database to avoid these kind of errors.
funEntrylogin(s, tb_id.Text, tb_pswd.Text, DateTime.Now, DateTime.Now);
This is because you had error on the initialization of that int. correct it and this error will be gone.
"A good programmer is someone who looks both ways before crossing a one-way street." -- Doug Linder
coolestCoder
|
|
|
|
|
You've done it again you inconsiderate person! 
DO NOT DELETE YOUR MESSAGES!!!
|
|
|
|
|
how can i open(visualize) a System.Windows.Forms.MenuItem of System.Windows.Forms.MainMenu by code?
Maybe one could disassemble the ToolStripMenuItem and see what they are doing inside the ShowDropDown method. Or use Windows API to really simulate a mouse click on the menu item.
how can i do this?
jaye
|
|
|
|
|
jaimeaye wrote: Maybe one could disassemble the ToolStripMenuItem and see what they are doing inside the ShowDropDown method.
You could do it yourself. The MSIL Disassembler-Tool (Ildasm.exe) is part of the Framework SDK. Information on its usage can be found on MSDN.
"Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning." - Rick Cook www.troschuetz.de
|
|
|
|
|
Hello,
how can I access the programpath from a setupproject after or during installation?
Greetings from germany
Jerry
|
|
|
|
|
Confused with question 
<l>Thanks and Regards
Sandeep
|
|
|
|
|
You mean while installing the application? Haven't the user informed the path he wanted to install the application to?
Otherwise the program itself knows its path by using this variable:
Application.StartupPath
|
|
|
|
|
Hello,
no, I must fin a third parity program installation path an wanna install there my programm, cause it needs files from this location.. how can i solve this?
greetings
|
|
|
|
|
Maybe you should take a look at WMI and what it can offer in terms of retrieving the installation path of a software installed on a machine.
|
|
|
|
|
My application is in C# and it runs on a mobile device(its a Symbol device). I want to start an exe in the '\Program Files' folder from my application. Can anyone tell me what command (line of code) to use..
I see that for playing .wav files there is 'Symbol.Audio.Controller' , is there any such thing for exe files.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
