|
Hi Chris,
The birth of my first child delayed this reply...sorry. Mom and baby are fine, I wasn't thinking about MFC for the last week!
In reference to your comments (thanks, BTW)I saw the image processing as a *serial* sequence of views, all derived from the same base doc, aka the raw image. First, the user would see a view that's the raw image (grayscale), then a binarized view, finally a binarized view with annotated feature locations (edges, actually). Therefore, since the views are serial, I thought life might be easier if I stuck with SDI.
In the future I would like to package this capability into a conventional or ActiveX DLL, to be called from a controlling Visual Basic program. This led me to pursue a minimally featured and simple image processing piece, which led me to SDI. However, since I'm an MFC neophute (and really struggling at times!) I'm open to architectural suggestions.
Regards,
John K.
|
|
|
|
|
Could you please comment on the book and any you've found to be better ? I'm looking for a good book at the moment, one that goes beyond obvious filters like emboss, sharpen, soften, gamma, etc. ( done all those already ;0)
Christian
The content of this post is not necessarily the opinion of my yadda yadda yadda.
To understand recursion, we must first understand recursion
|
|
|
|
|
Hello Christian,
Sorry for the delayed reply...my excuse is my first child, daughter, was born eight days ago. We're all doing fine, but MFC was the last thing on my mind!
As for practical books on image processing, I haven't run across *any*. To be fair, I haven't searched the literature for the last decade or so; I might be way out of date. They say experience is the best teacher, and that has certainly been true in my case. My image processing experience is mostly in machine vision, doing assembly or process automation. I've almost always been able to accomplish my image analysis tasks using edges, since the job at hand is usually some kind of gauging operation. Frankly, the problem is almost never the actual processing of the image; typically the lighting sucks or the optics are marginal or the damn thing shakes 'cause you're doing assembly in an automotive stamping plant. Rarely I've used connectivity and even less frequently some sort of correlation technique.
One area that seems to have a lot of practical literature is optics design. I also stay abreast of practical developments through technical magazines, e.g. _Assembly_.
Regards,
John K.
|
|
|
|
|
I am trying to write a program to monitor the parallel port under Windows 2000. I have code that works fine in Win9x but under Win2k it just locks up. I have stepped through the program and determined that the ReadFile call to read from the port never returns. It appears to enter an infinite loop. I have tried to set the port timeouts using SetCommTimeouts but that always returns an error code. Does anyone have any sample code for monitoring the parallel port in Win2k?
Thanks in advance.
Wayne Ware
![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
|
|
|
|
|
I don't know what version of the toolbox is, but the files are dated Oct 1998. Compiler is VC6/SP3, running under windows NT. Since I can't log onto the support forums at CodeJockey (what a moronic decision THAT was for the CJ people), I have to ask this here, hoping against hope that someone out there can help.
The app I'm working on implements a CJTabCtrlBar, which is initially docked on the left side of the main window frame. If I close the toolbar, everything is fine (the program continues to work normally). But if I float it first, and then close it, the program freezes up completely, and I have to use task manager to end the task.
Has anyone else experienced this problem, and if so, was the CJTools code ever patched to fix it, or have you found another work-around?
I need help ASAP on this, so many thanks in advance.
|
|
|
|
|
Are you referring to CJLibrary by Kirk? I used version 6.09 (the last version) with no problem.
|
|
|
|
|
Yes, exactly. I don't know what version of the CJLibrary they're using though. All I have to go by is the dates of the comments in the files.
|
|
|
|
|
Hi
This question relates to MRU's.
Is there any way to force an application to call OnOpenDocument even if you
are attempting to load a file already open i.e. if an file is loaded into an
application and then an attempt to load the same file via the MRU is
attempted serialization does not occur (I'm not sure why).
Could somebody explain how I could get it to use OnOpenDocument even if the
file is already open?
Thanks in advance
John
|
|
|
|
|
ummm ... not sure i understand the question but you could just post a message to yourself that responds to the file/open command (use WM_COMMAND)
mostly watching the human race is like watching dogs watch tv ... they see the pictures move but the meaning escapes them
|
|
|
|
|
I've to create a radiobutton control. (VC++6, ATL3,...).
I created control, subclassing standart windows "radio button" (new atl object,...)
Ok. But! How to make only one radiobutton in a group to be checked. Searching in MSDN gave me only some OLE_OPTEXCLUSIVE and nothing more.
Can anyone help?
Thanx.
|
|
|
|
|
In the dialog editor, you do that by ticking 'GROUP' for the first radio button in a group. I don't know how to programatically set that property, but you should be able to figure it out by playing with some buttons that have that property set/unset.
Christian
The content of this post is not necessarily the opinion of my yadda yadda yadda.
To understand recursion, we must first understand recursion.
|
|
|
|
|
I'm trying to share a directory on the local machine(Win98) using NetShareAdd. I fill in the share_info_50 structure and run the code and it works fine, I check and the directory is shared. Restart the computer however and the directory is no longer shared. I haven't managed to find any documentation on this so far, I thought perhaps another function needed to be called to update the registry, where I assume information about shares is stored.
If anyone has any clues that would help me along I'd love to hear them.
---
Flit@tpg.com.au
|
|
|
|
|
I used VC++ 6.0 AppWizard to build an application with Automation
enabled. If I load, say, a MS Word file into the app, menus are all text
only (no bitmaps), while originally in MS Word, all menus are bitmapped.
How can I make the original menu show up in my app?
Thanks in advance,
Robert
|
|
|
|
|
I still use version 5 for a system I support but have just run into a brick wall. A third party vendor that supplies a set of .H, .LIB, and .DLL files for us, claims that for their new and improved version, that we must be using version 6 of VC. They claim that the .LIB file is incompatible with prior releases of the linker. Lo and behold, they are right. If I try to link I generate an error message of invalid file and if I use dumpbin on the .LIB, I get the same error.
Has anyone else run into this problem?
Am I the last developer in the universe still using version 5?
Whatever would possess MS to change library formats so that the files are incompatible? 
Chris
|
|
|
|
|
your vendor can build .LIBs that are compatible with VC5, as long as you have VC5 SP3 or higher. i forget the exact switch but it's something like "vc5compat".
-c
|
|
|
|
|
Thanks Chris. I am using VC5 with SP3. And the vendor is investigating producing a 'vc5compat' version of the library. Would you also happen to know whether that means that the .DLL will be different as well?
Do you or anyone else have any ideas what could now be missing from the .LIB, so that it is VC5 compatible?
Thanks.
Chris
"I never met a feature I liked if it broke backward compatibility" 
Chris Meech Feb 2001.
|
|
|
|
|
no, the DLL shouldn't change, only the little stub .LIB.
b.t.w. the linker option is "LINK50COMPAT". you'll have to add it to the options manually (there's no button or list item to choose for this one).
the help is a bit (even for MS) sketchy for this, but i've used it and it does work.
-c
|
|
|
|
|
MS changed the linker format to accomodate faster linking (among other reasons).
I swear I remember that MS used to offer a new version of the linker to download, but i can't find it anymore. In any event, you should be able to use the version 6 linker without any problems.
|
|
|
|
|
Hi,
The IDE of Visual C++ 6.0 display colored text. I want to
transfer in Word this text, i.e. cpp file, but in color.
How can I do that ?
Thanks
|
|
|
|
|
short answer ... you can't (unless norm's aliens are hanging around somewhere) as the coloring is a display-time function of the vc editor and no color information is stored in the source files
you could write one i suppose that converted the text to html but that would be just so painful it would hurt all the way here
mostly watching the human race is like watching dogs watch tv ... they see the pictures move but the meaning escapes them
|
|
|
|
|
It works...
Goto Visual C++ and press "print" and then in Word SHIFT + INCL (in German "Einfg").
SCRN Henno Buschmann (Loggy)
|
|
|
|
|
If you go to www.wholetomato.com and download the beta version of Visual Assist, they supposedly support RTF pasting of colored source code, however it is a beta and it might not work correctly.
|
|
|
|
|
has anybody else noticed that the default dialog bg color has changed from nt4 to w2k? how do i get bitmaps on dialogs to blend in across platforms without getting a stupid grey square around the image on one platform or the other
simple fixes please (woof woof woof)
mostly watching the human race is like watching dogs watch tv ... they see the pictures move but the meaning escapes them
|
|
|
|
|
You use LR_LOADMAP3DCOLORS when you load the bitmap (this means you have
to load it youself). This will replace all of the system colours
in the bitmap with the corresponding ones the user has selected in display
properties. You may want to catch the sys colour change message and
re-load your bitmap as well. Personally, I judge an app harshly if the
UI is sloppy -- I figure the code I can't see is probably sloppy as well  .
HBITMAP hBmp = (HBITMAP)::LoadImage( AfxGetInstanceHandle(),
lpszResourceName, IMAGE_BITMAP, 0,0, LR_LOADMAP3DCOLORS );
HTH
Daniel
|
|
|
|
|
You can also use GetSystemMetrics to find out what the colour is. This is always a good practice anyhow, because people can change the colours using Desktop Themes if they want to.
Christian
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
