|
|
DooDooo wrote: Saranya B wrote:
What I thought was, to work with both VS-2003 and 2005, it is enough to have .Net framework 2.0 and this 2.0 will have all the features supported by 1.0 and 1.1. We dont install .Net 2.0 as seperate one and only upgrade 1.1 to 2.0. So no need to change the framework.
Yes you are correct.
DooDooo wrote: Because framework 2.0 can support all the libraries available in 1.1. Updating a version means, they won't remove the previous classes. 2.0 is having much more classes than 1.0. Now 3.0 is there. That can support all the classes available in 1.1 as well as 2.0. Hope you understood
Close, but not quite - there are some pretty major differences between the versions, as my boss would tell you if he were here - he spent an age porting our app to 2.0 hehe
"Knock me down, I'll get straight back up again, I'll come back stronger than a powered up pacman"
(Lilly Allen / Kaiser Chiefs)
|
|
|
|
|
VS 2005 has a built in stand-alone web server, so it doesn't need IIS. You can use IIS for 1.1 applications and the stand-alone server for 2.0 applications.
Saranya B wrote: We dont install .Net 2.0 as seperate one and only upgrade 1.1 to 2.0.
There is no "upgrade" from 1.1 to 2.0. When you install 2.0 on a system that already has 1.1, they will both be available side byte side.
Saranya B wrote: I dont understand why she changes her IIS every time.
Me neither.
Saranya B wrote: But I dont change IIS. I just work with both VS-2003 and VS-2005 at a same time.
How is it possible?
My guess is that you are using the stand-alone server in VS 2005.
---
single minded; short sighted; long gone;
|
|
|
|
|
Thanks for you explanation!!!
Guffa wrote: There is no "upgrade" from 1.1 to 2.0. When you install 2.0 on a system that already has 1.1, they will both be available side byte side.
So, do you mean when we install .net framework 2.0, there will be 2 instances. One with 1.1(which exist already) and another instance with 2.0 version?
Can I take your explanation in this way?
|
|
|
|
|
|
Yes.
---
single minded; short sighted; long gone;
|
|
|
|
|
Error 2 Base class 'System.MarshalByRefObject' specified for class 'RemotableType' cannot be different from the base class 'System.Windows.Forms.Form' of one of its other partial types. C:\Documents and Settings\050661M.SITEI\Desktop\remoting\WindowsApplication1\WindowsApplication1\RemotableType.vb 4 14 WindowsApplication1
the above is the error i get when trying to inherite the 'System.MarshalByRefObject' for remoting by referencing from
[^]
anybody knows y?
|
|
|
|
|
Hi,
I am working in a Asp.Net Project in which i have to import an Excel sheet datas into a mysql database table and then i want to retrieve those datas into my dotnet application. pls note that i don't use any datagrid in my application. i just designed tables in my Form and get datas in text boxes. i'm new in using mysql database and i already worked in sql server. in sql we have import option and i don't find any of that option in mysql. i'm totally confused in how to import those datas into my database as there are some 50 rows in my excel sheet. I heard that we can extract those datas to database using C# code. pls provide me with a proper solution as i'm new to this concept and i'm struggling with this for the past 3 days(pls note that i don't need any tool to be used for exporting datas as no such tools will be provided for me).
Thanks in Advance
Vijay.
|
|
|
|
|
//-------------------------------------------
//To Extract data from excel sheet and store it in Dataset.
private DataSet PerformQueryIntoDataSet(string strFileName,string sheetName)
{
string strConn;
strConn = "Provider=Microsoft.Jet.OLEDB.4.0;" + "Data Source=" + strFileName + ";" + "Extended Properties=" + Convert.ToChar(34).ToString() + "Excel 8.0;HDR=NO; IMEX=1;" + Convert.ToChar(34).ToString();
//You must use the $ after the object you reference in the spreadsheet
OleDbDataAdapter myCommand = new OleDbDataAdapter("SELECT * FROM ["+ sheetName + "$]", strConn);
DataSet myData = new DataSet();
myCommand.Fill(myData, sheetName);
return myData;
}
//-------------------------------------------
//To get number of records in the sheet
[Datasetname].Tables["<sheet name="">"].Rows.Count;
//To extract data from table in dataset.
DataRow RowName = (DataRow)[Datasetname].Tables["<sheet name="">"].Select().GetValue(rowIndex);
string strValue = RowName[0].ToString().ToUpper().Trim();
//Then check for validation and store it in Database.
There's never a Wronge Time To Do The Right Thing !!
|
|
|
|
|
I have tried webclient class uploadfile method to upload files to server as,
Dim fs As New WebClient
Dim retValue As Byte()
retValue = fs.UploadFile("http:\\<somesrc>\srcfile", "POST", "c:\srcfile")
I got exception as,
The remote server returned an error: (401) Unauthorized.
Let me know how to solve this error, and upload files to server using webclient.
Be simple and Be sample.
|
|
|
|
|
Check ASP.NET is having write permission on c:\srcfile ? Try server.mappath for the server directory
|
|
|
|
|
when i am sending mail to a person whose domain is same like the domain name i have mentioned in the smtpserver it is sending correctly.but if i will send to a person who has a yahoo email id it's not sending it's showing an error like this
Server Error in '/' Application.
--------------------------------------------------------------------------------
The server rejected one or more recipient addresses. The server response was: 503 This mail server requires authentication when attempting to send to a non-local e-mail address. Please check your mail client settings or contact your administrator to verify that the domain or address is defined for this server.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The server rejected one or more recipient addresses. The server response was: 503 This mail server requires authentication when attempting to send to a non-local e-mail address. Please check your mail client settings or contact your administrator to verify that the domain or address is defined for this server.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x8004020f): The server rejected one or more recipient addresses. The server response was: 503 This mail server requires authentication when attempting to send to a non-local e-mail address. Please check your mail client settings or contact your administrator to verify that the domain or address is defined for this server.
]
[TargetInvocationException: Exception has been thrown by the target of an invocation.]
System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters) +0
System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams) +2500080
System.Web.Mail.LateBoundAccessHelper.CallMethod(Object obj, String methodName, Object[] args) +72
[HttpException (0x80004005): The server rejected one or more recipient addresses. The server response was: 503 This mail server requires authentication when attempting to send to a non-local e-mail address. Please check your mail client settings or contact your administrator to verify that the domain or address is defined for this server.
]
System.Web.Mail.LateBoundAccessHelper.CallMethod(Object obj, String methodName, Object[] args) +119
System.Web.Mail.CdoSysHelper.Send(MailMessage message) +2684
System.Web.Mail.SmtpMail.Send(MailMessage message) +131
GEthermometrics_Inquiryform.Inquiryform1.btnsendrequest_Click(Object sender, EventArgs e) in inquiryform.aspx.cs:162
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
can anyone help me.it's urgent
|
|
|
|
|
What about posting some sample code ?
|
|
|
|
|
Hi,
I need to upload all files from the given client's physical folder path to server path.
How do I upload all files to web server path without using "file" type.
Rams.
Be simple and Be sample.
|
|
|
|
|
ramskr wrote: web server path without using "file" type.
But whats the problem with File type ?
Thanks and Regards
Sandeep
If you want something you never had,
do something you have never done!
|
|
|
|
|
User can be able to choose only the folder, not the files.
Be simple and Be sample.
|
|
|
|
|
ramskr wrote: How do I upload all files to web server path without using "file" type.
First get the files in that directory using
System.IO.Directory.GetFiles
The above line will return all the files present in the directory as a string array.
ramskr wrote: I need to upload all files from the given client's physical folder path to server path.
Use webclient class. It is having upload method. Start a loop till end of the above string array and upload each file using webclient method in the loop. Finally dispose webclient object
|
|
|
|
|
I need the list of client side files for the selected folder.
For eg, if user choose D:\Test, my web application needs to upload all files in that client folder to web path.
If we use system.io.directory.getfiles - it searches on server and cause exception as "could't find the path"..
Is there any way to get all files on client machine and upload to server machine.
Be simple and Be sample.
|
|
|
|
|
ramskr wrote: Is there any way to get all files on client machine and upload to server machine.
Upto my knowledge there is no method to do this using server side scripting. Because this will break the security system. If a server side script can list out the files in your directory then what is the security for your files ?
|
|
|
|
|
Hi,
I need user on client machine to select path from that machine (local folder only). On Upload, my web application needs to get all the files in that folder and upload it to fixed server path.
All I need is to get files for the selected client path.
Be simple and Be sample.
|
|
|
|
|
Hi,
I have a dotnet application in which i have to import data from an excel sheet and store datas in mysql table to display those datas in my dotnet application. Iam using this datas to display datas for generating employee salary slip in my dotnet application. pls do help me with source code in C#.
Regards
Vijay.
|
|
|
|
|
|
i have a database table to store all the article content which has a field is memo data type to store all the article content(generally contains richtext). how to use asp.net to read from a word document then store the content into this field?
I am Entry level person
|
|
|
|
|
hi the below was my attempt of trying to make a new browser pop up when a button is clicked with java scipt
although it compiles it doest work instead of poping up another browser it just redirect to inself couls some1 help me see if i did anyhting wrong pls
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" %><br />
<br />
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"><br />
<script type="text/javascript"><br />
function OpenWindow()<br />
{<br />
window.open("Default.aspx", "_blank");<br />
<br />
}</script><br />
<html xmlns="http://www.w3.org/1999/xhtml" ><br />
<head runat="server"><br />
<title>Untitled Page</title><br />
</head><br />
<body><br />
<form id="form1" runat="server"><br />
<div><br />
<asp:Button ID="Button1" runat="server" Text="Button" OnClick="Button1_Click1" /></div><br />
</form><br />
</body><br />
</html><br />
<br />
<br />
<br />
the code behind file in the form load<br />
<br />
<br />
Button1.Attributes.Add("Onclick", "<script>OpenWindow();</script>");
|
|
|
|
|
Try this, in your button click event (or even in its open function) add
Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs)
' Do some other processing...
Dim sb As New StringBuilder()
sb.Append("<script>")
sb.Append("window.open('http:
sb.Append("</scri");
sb.Append("pt>")
Page.RegisterStartupScript("test", sb.ToString())
End Sub
Then in your button
<asp:Button id="Button1" onclick="Button1_Click" runat="server" text="Go!"></asp:Button>
Make sure you add
Imports System.Text
To the top of your code behind as this uses the StringBuilder Class
" In the next millennium there are two kinds of business, those on the Internet and those out of business"
Bill Gates
"Be nice to nerds. Chances are you'll end up working for one."
Bill Gates
"Let's face it, the average computer user has the brain of a Spider Monkey."
Bill Gates
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
