Visual Basic

Christian Graus5-Jul-07 4:55

5-Jul-07 4:55

Word handles this by creating a temporary file, which is the file that is opened for editing. Read only mode means it reads the entire file, then closes it, it doesn't keep it open.

Open a Word doc, then look in Windows Explorer, you'll see the temporary file there.

Christian Graus - Microsoft MVP - C++

"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )

Luc Pattyn5-Jul-07 6:02

Luc Pattyn

5-Jul-07 6:02

Hi,

I beg to differ: whoever creates/opens a file is in control regarding the
operations others can do to the same file.

one can easily share a file between threads and even processes; it suffices
to apply the correct FileShare value when creating/opening the file.

My example shows a first stream writing to a file it allows others to read,
and a second stream reading from same file allowing others everything:

string filename="streamTest.txt";
using(FileStream fw=new FileStream(filename, FileMode.Create,
		FileAccess.Write, FileShare.Read)) {
	using(StreamWriter tw=new StreamWriter(fw)) {
		tw.WriteLine("Created new file");
		using(FileStream fr=new FileStream(filename, FileMode.Open,
				FileAccess.Read, FileShare.ReadWrite)) {
			using(StreamReader tr=new StreamReader(fr)) {
				for(int i=0; i<10; i++) {
					tw.WriteLine("line "+i);
					tw.Flush();
					string s=tr.ReadLine();
					Console.WriteLine(s);
				}
			}
		}
	}
}

BTW the flush is there to undo the buffering that takes place in these streams;
without it there probably would be nothing to read when the short loop
terminates; for longer streams, flushing is not needed ! And normally
the reader should continue to read after the writer has done, my example does not.

Smile | :)

PS: sorry for posting a C# example in a VB.NET forum !

Luc Pattyn

[My Articles] [Forum Guidelines]

balakpn5-Jul-07 19:53

balakpn

5-Jul-07 19:53

hi Luc Pattyn
D'Oh! | :doh:

but its not working mate
i am appending the string
is it because of that something else

with regards
Balagurunathan.B

Luc Pattyn5-Jul-07 23:48

Luc Pattyn

5-Jul-07 23:48

balakpn wrote:
not working

please be more specific: if it throws an exception show it; if it runs but
does not produce the expected outcome, please explain.

I did run my example before posting it. Much depends on the FileMode, FileAccess
and FileShare values you use EVERY time the file or filestream gets created/opened.

e.g. the simplest overloads for creatinbg/opening a file (those with default values
for FileShare) would use FileShare.None, disallowing others to touch the file.

Smile | :)

Luc Pattyn

[My Articles] [Forum Guidelines]

balakpn6-Jul-07 3:20

balakpn

6-Jul-07 3:20

hi its working fine
i made a minor mistake thts the problem sorry and thanks a lot

with regards
Balagurunathan.B

Luc Pattyn6-Jul-07 3:26

Luc Pattyn

6-Jul-07 3:26

you're welcome.

Luc Pattyn

[My Articles] [Forum Guidelines]

word document

hsuresh5-Jul-07 0:39

hsuresh

5-Jul-07 0:39

I am developing ASP.NET Web Application using vb.net One of
the requriement of this application is ...when user submit
the Web Form....it should open the Word Templete and
insert the values into that templete...

Does anybody knows...How to Open and Writes into Word
Document Using ASP.NET and vb.net Directly...i am looking for
specific sample...

Thanks,

Christian Graus5-Jul-07 1:16

5-Jul-07 1:16

What on earth are you thinking here ?

1 - I told you that ASP.NET isn't going to matter to your solution
2 - I told you what you need in order to do this, all you have to do is google and download it, I'm sure it comes with samples
3 - for all that, I am sure that you're not the first person who wants to do this, there must be countless google hits that will tell you the answer, with code
4 - posting the same question over and over, when the last time you asked is still visible, is just plain annoying, it's not going to leave anyone inclined to answer you any faster.

Christian Graus - Microsoft MVP - C++

"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )

Christian Graus5-Jul-07 1:43

5-Jul-07 1:43

OK, well, perhaps you need to write a single, intelligent post that actually outlines what you have done, instead of posting the same vague question over and over ? If what you want to do, occurs on the client side, then it's not going to work in ASP.NET, because the server code is on the server, not on the client.

Christian Graus - Microsoft MVP - C++

"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )

Sathesh Sakthivel5-Jul-07 1:30

Sathesh Sakthivel

5-Jul-07 1:30

One Post is enough.

WHy are you again and again posting the same question.

there itself CG has answered you.

Regards,

Satips. Rose | [Rose]

Christian Graus5-Jul-07 2:22

5-Jul-07 2:22

Got to love it when instead of taking your advice, they just delete all their posts.

Christian Graus - Microsoft MVP - C++

"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )

Re: dim f as string

CPallini5-Jul-07 0:48

CPallini

5-Jul-07 0:48

You're mixing types in a horrible way. Mad | :mad:

BTW, since tot is an Integer, it cannot store a floating point value.
Smile | :)

If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.

Re: dim f as string

magedhv5-Jul-07 1:05

magedhv

5-Jul-07 1:05

so what should i do to store float numbers

Re: dim f as string

Christian Graus5-Jul-07 1:13

Numerical textbox validation, how to handle an empty string? [modified]

5-Jul-07 1:13

Use a float, decimal, or double. The questions you're asking, and the code you're posting, indicate that you should slow down, buy a basic book on VB.NET, and work through it. You should certainly be aware of the horror of VBs loose typing, and be aware of when you're relying on it to make your code work, it can create all sorts of hidden bugs and side effects.

Christian Graus - Microsoft MVP - C++

"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )

MatthysDT5-Jul-07 0:09

Re: Numerical textbox validation, how to handle an empty string?

5-Jul-07 0:09

I want to validate that my textbox contains a numerical value.
I do this in the "textbox.validating" event, everything works fine until all the text is cleared and the box has an empty string. The validation doesn't allow an empty string because it's not numerical (no matter how I code it). But this field is not compulsory for the user to enter, so he should be able to enter either a numerical value or an empty string.

Here is my code so far, it doesn't work for empty strings, textbox remains invalidated and forces focus onto the control.

Private Sub MyMaskedTextBox_Validating(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles MyMaskedTextBox.Validating
    Dim num As Double
    If Me.MyMaskedTextBox.Text = "" Or IsDBNull(Me.MyMaskedTextBox.Text) Then
        MyErrorProvider.SetError(Me.MyMaskedTextBox, "")
    Else
        Try
            num = Me.MyMaskedTextBox.Text
            MyErrorProvider.SetError(Me.MyMaskedTextBox, "")
        Catch ex As Exception
            MyErrorProvider.SetError(Me.MyMaskedTextBox, "Value must be numeric")
        End Try
    End If

End Sub

This is a real problem because nothing I've tried so far allows the user to enter an empty string!
Can't I somehow force the field to validate even if the contents don't match the validation criteria?

_______________________________________________________________________
http://www.readytogiveup.com/[^]
"you can't forget something you never knew..." M. Du Toit

"Watching Migthy Joe Young made me hate my life..................................I want a gorilla!" A. Havemann

SHatchard5-Jul-07 0:19

SHatchard

5-Jul-07 0:19

The following code may be better

if string.isnullorempty(Me.MyMaskedTextBox.Text) orelse isnumeric(Me.MyMaskedTextBox.Text) then
'Its a number or an empty string
else
'Its got content but is not numeric
end if

Re: Numerical textbox validation, how to handle an empty string?

MatthysDT5-Jul-07 1:25

Re: Numerical textbox validation, how to handle an empty string?

5-Jul-07 1:25

Thank you SHatchard but that code does exactly the same as mine.
The textbox still doesn't validate with an empty string and focus is forced to the control until it validates.

MatthysDT5-Jul-07 1:55

Re: Numerical textbox validation, how to handle an empty string?

5-Jul-07 1:55

This field is databounded to a DB cloumn of the type Double.
It seems that NULL is not accepted by datasets for Double columns.
Eventhough the default value is DBNull (which .Net accepts) and the AllowDBNull property is set to TRUE (which .Net accepts)

The columns NullValue property can only be set to <throw exception="">, .Net rejects all other selections.

I still don't have a solution but this problem starting to look more like a bug in .Net than and not in my code.

cutequencher5-Jul-07 6:05

cutequencher

5-Jul-07 6:05

try to replace
--If Me.MyMaskedTextBox.Text = "" Or IsDBNull(Me.MyMaskedTextBox.Text) Then
with
--if isnothing(Me.MyMaskedTextBox.Text) then
or
--if Me.MyMaskedTextBox.Text is nothing then

if it still doesnt work... may i know what vb are you using?

Re: Numerical textbox validation, how to handle an empty string?

MatthysDT6-Jul-07 0:51

6-Jul-07 0:51

Thank you for the response!
That doesn't work either, I'm using VB .Net in Visual Studio 2005.
That field is data-binded to a dataset, the column's type is Double.
I think that has something to do with it not allowing Nulls.

Funny thing is, it allows NULLS, just not when you try to enter it with the textbox!

_______________________________________________________________________
http://www.readytogiveup.com/[^]
"you can't forget something you never knew..." M. Du Toit

Answer....

MatthysDT16-Jul-07 2:36

16-Jul-07 2:36

O.k, I found a work-around for the problem. Posting it here for the sake of anyone having similar problems.

What happens that causes the problem is that VS doesn't allow a control (in my case a textbox) to lose focus if the text inside it doesn't validate. But for numerical textboxes it also doesn't validate empty strings, even if you want the user to be able to add an empty string.

The solution is to set the data source update mode to never, this disables .Net validation on the control, allowing you to do this with custom code.

Me.MyNumericTextBox.DataBindings.DefaultDataSourceUpdateMode = DataSourceUpdateMode.Never

The validating event still fires though, but it's under YOUR control now, so the following code will allow you to force the user to enter either a numerical value, or an EMPTY STRING.

    Private Sub MyNumericTextBox_Validating(ByVal sender As Object, ByVal e As System.ComponentModel.CancelEventArgs) Handles MyNumericTextBox.Validating
        If String.IsNullOrEmpty(Me.MyNumericTextBox.Text) OrElse IsNumeric(Me.MyNumericTextBox.Text) Then
            MyErrorProvider.SetError(Me.MyNumericTextBox, "") 'Fire or cancel the 
'error in whatever way suites you, this simply clears the errorprovider
        Else
            MyErrorProvider.SetError(Me.MyNumericTextBox, "The value must be numeric") 'Fire or
'cancel the error in whatever way suites you, this sets the error on the errorprovider

            Me.MyNumericTextBox.Focus() 'This forces the user to enter the validated 
'data before leaving the control
        End If
    End Sub

Please reply to this post for more information.

_______________________________________________________________________
http://www.readytogiveup.com/[^]
"you can't forget something you never knew..." M. Du Toit

Christian Graus4-Jul-07 23:47