|
Some do, some don't. Check out NewEgg.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997 ----- "...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
IDE hard drives have a tendency to keep retrying silently if errors occur, rather than report the error quickly. You notice a general slowdown in performance. I would try a different disk to see if you get different results.
|
|
|
|
|
Hi,
some disks have "SMART" technology built-in (Self Monitoring something).
Google for "disk SMART utility" or something like that, download and run
the tool, it will tell you whether your disk supports it, and if it does,
how healthy it is.
I am not sure SMART works over USB too though.
|
|
|
|
|
Luc Pattyn wrote: I am not sure SMART works over USB too though.
SMART works over IDE interface. What OP is using is an IDE to USB interface. It is used as a removable storage device
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
USB would not prevent someone from implementing SMART; for it to be available,
both the disk, the USB-to-IDE converter and the Windows driver must support it.
As I said, I don't know whether the PC side is OK, and I sure don't know
about the actual device at hand.
|
|
|
|
|
Sarath. wrote: I checked for Bad sectors but there's no problem with the data.
How did you determine that there where no bad sectors? I have a drive that is dieing scandisk reports nothing wrong but the event log says otherwise.
Check the event log for drive errors.
With respect, I must disagree. A quick look at middle management in just about any corporation shows that the dodo not only survived, it's reproducing in record numbers. Christopher Duncan
|
|
|
|
|
I want to attach external display and keypad to my mobile phone. So that i can use my mobile/sim card using external diplay and external keypad.
Please inform me, if any device available in market which is capble to give above fuction through mobile phone/simcard.
Interested in useful invetion/tricks/software which can be provided to customer or caompany and earn revanue or profit
|
|
|
|
|
These kinds of attachments come as device speacific gadgets. So as per your handset I feel you can Google it out
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
Hi
I am noob, almost idiot in C and stuff. Coming from Xbase and sql , till now i did'nt pay attention to C and C++ . Now i got a problem . I have to read from the serial port COM4 some data (a scale is sending) and i would like to store the input into a file. After that i KNOW what to do ....
Please be so kind and help an idiot ! I spent 3 days on net searching something appropiate.... but i found only complex things and the matter - on my oppinion - is simple for a guru like you !
Please send your help to sicond_ro@yahoo.com
A man is getting nuts !
|
|
|
|
|
|
I want to read data from a hardware device like time access punching machine.
What is the complete process to read data and storing into a databse from any hardware device.
If any one have some idea, please guide me.
Thanks,
Pathak
|
|
|
|
|
I'll not just guide you, I am ready to write it for you, if the machine's manufacturer offers an API.
My rate is a moderate 450 EUR/day for full-time contract work.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Is there any tool which list an installable file paths in a system? for example if I run a setup, which installs some dll or sys files and also write a regestry entry, then is there any way to find those files and reg entries?
|
|
|
|
|
If I'm not Blind and am not gone nuts!
THIS IS A HARDWARE Thread
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
Although you asked in the wrong forum, I'll be kind and answer anyway.
You can use RegMon and FileMon (both from SysInternals) to watch the registry and file changes as the setup application is running.
Hope this helps,
|
|
|
|
|
My servers profile:
OS Name Microsoft(R) Windows(R) Server 2003, Standard Edition
Version 5.2.3790 Service Pack 1 Build 3790
System Manufacturer Compaq
System Model ProLiant ML370 G3
System Type X86-based PC
Processor x86 Family 15 Model 2 Stepping 7 GenuineIntel ~2387 Mhz
Processor x86 Family 15 Model 2 Stepping 7 GenuineIntel ~2387 Mhz
Processor x86 Family 15 Model 2 Stepping 7 GenuineIntel ~2387 Mhz
Processor x86 Family 15 Model 2 Stepping 7 GenuineIntel ~2387 Mhz
BIOS Version/Date Compaq P28, 8/16/2002
The processors are Intel XOEN 2.40GHz and I thought all XOEN where x64 but the system type is currently x86? If I'd used a 64 bit OS would that change the System type?
I'm listening but I only speak GEEK.
|
|
|
|
|
A 2002 XEON is p4 based and AFAIK no p4 based CPUs that old had 64 bit support. AMD was first out the gate with a 64bit x86 chip, and IIRC the a64 dates to 03 or 04.
Xeon's are no more a single CPU type than celerons are, they're just intels fastest design using a different socket and typically with more on board cache.
you can check your cpu using CPU-z. IIRC for an intel CPU, 64bit support is indicated by EMT64 instruction support but I don't have a machine to test until I get home from work.
http://www.cpuid.com/cpuz.php[^]
--
You have to explain to them [VB coders] what you mean by "typed". their first response is likely to be something like, "Of course my code is typed. Do you think i magically project it onto the screen with the power of my mind?" --- John Simmons / outlaw programmer
|
|
|
|
|
Thank you!
Exactly what I was looking for, thanks again.
instruction is EM64T
I'm listening but I only speak GEEK.
|
|
|
|
|
Can any1 tell me the best Graphics card in industry....what ever it costs..i dont care...?
NVIDIA GEFORCE anything with its series no.....shud be having a 256 or more video RAM so that i can play any game.....
SAJAN A PILLAI
C#.NET Programmer
TELESOFT INDIA PVT LTD...
BANGALORE
|
|
|
|
|
8800 GTX ultra. Check the actual clock speeds, alot of makers will try and overclock the chips slightly for an extra performance edge.
--
You have to explain to them [VB coders] what you mean by "typed". their first response is likely to be something like, "Of course my code is typed. Do you think i magically project it onto the screen with the power of my mind?" --- John Simmons / outlaw programmer
|
|
|
|
|
2 nVidia GeForce 8800 Ultra in pair using SLI.
|
|
|
|
|
That's more of a religious question than anything else.
My card of choice is nVidia.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997 ----- "...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
|
If you are ever planning to try out Linux, NVidia is the only viable choice. ATI cards are almost impossible for novices to install under Linux. Hell, even I cannot be bother to jump through the 10000 hoops AMD/ATI have set up for me and my X850.
Go to hell, ATI...
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Sebastian Schneider wrote: Go to hell, ATI...
ATI was bought by AMD. Tell AMD to go to hell...
|
|
|
|