|
 Read in the MSDN about SetupAPI.txt (it is located in the Windows directory). You can set in the registry a flag so you would get a lot of information written in to SetupAPI.txt
|
|
|
|
|
hiii m akhshay gandhi....
i m doin engg in information systems
can smbdy help me to connect two computers and process them together i.e parallel processing i have two PCs bbtt hw to do this is strange to me if ne1 can suggest me what to study and hw to do it will be great!!!!!
|
|
|
|
|
kthxbye
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
hii Sebastian...
bro i don get ur answer .. can u plz explain...
|
|
|
|
|
Ifuspkinsmsuwlgtitinrtrn
Expands to
if you speak in SMS you will get it in return.
I request all new posters to go through the posting manners and maintain the decorim of this community.
Coming back to your question it is highly vague if you just want to connect two PCs and do data sharing or a Higher level of data processing using parallel processors. Could you please be a bit more clear.
And before you get knocked hard refrain from using SMS
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
I am really sorry for using such short language, i was not aware of it. I don't want to disturb decorim of community.
Actually I want to connect two CPUs and process them together as single. Like Grid Computing.
I really don't understand from where to start for that i need some help.
Thank you sir, I assure you I try my best to maintain dignity of Forum.
|
|
|
|
|
As u r saying it looks you want to chopt down a process into various resorces. But could you please throw some more light on Connecting two CPUs. If you are speaking about grids it is not only based on connection and sharing of two CPUs by a same process but many other resources like bus, ram etc are utilized. Have u given a thought to this.
Also is it you want to build a cluster or a grid please get back to us with the above details.
And bro' it was good u learnt the lesson well. Now it is your duty to pass it on to others 
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
shouvik.d wrote: As u r saying it looks you want to chopt down a process into various resorces.
And bro' it was good u learnt the lesson well. Now it is your duty to pass it on to others
:Cough: :Cough: See here[^]
With respect, I must disagree. A quick look at middle management in just about any corporation shows that the dodo not only survived, it's reproducing in record numbers. Christopher Duncan
|
|
|
|
|
wat to see! It is my own post 
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
shouvik.d wrote: wat to see! It is my own post
Yea, was giving you a hard time about using sms in your post by well referencing your own post which chided that behavior. 
With respect, I must disagree. A quick look at middle management in just about any corporation shows that the dodo not only survived, it's reproducing in record numbers. Christopher Duncan
|
|
|
|
|
Please try to see the context. It was meant as a reply to Akshay's SMS post. well I did get the same bashing from senior members when i was a n00b. now I m catious
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
shouvik.d wrote: well I did get the same bashing from senior members when i was a n00b. now I m catious
I wasn't bashing you, just giving you a hard time (in jest) that's all.
Oh and the post correcting the original poster, was well done.
With respect, I must disagree. A quick look at middle management in just about any corporation shows that the dodo not only survived, it's reproducing in record numbers. Christopher Duncan
|
|
|
|
|
S Douglas wrote: Oh and the post correcting the original poster, was well done
Thanks a lot;)
Keep me burning till the End of Day!!!
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
Poor KID...
But best lesson you gave 
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
Hii Friends,
I have set a desktop machine as a Server with windows 2003 server installed and which will be up 24/7 due to file sharing requirements and web application deployed which has been used to share through Intranet.
The machine configuration is as follows
1.7 ghz, 845 Intel Chipset,
512 Ram and 60 gb harddisk
I wanted to know can i keep this machine 24/7 up. Will it impact the machine??
Nikhil Bandekar
Mumbai,
India
|
|
|
|
|
Hello
Well, i'm no pro, but as far as i know major issues for servers are (in no particular order):
- Temperature (aka Heat dissipation)
- OS stability
- Component quality and thus reliability
- Power flow stability
Keeping a machine powered on 24/7 WILL impact, always.
While a usual PC gets old enough without failing machines that are on 24/7 usually fail much sooner, the only think you can do is preventing unnecessary stress on the components.
First of you need to make sure that the server is backed up through a good UPS (http://www.apcc.com).
Dirty power (also caused by Thunderstorms) can damage hard drives and almost any other component of your server. The longer the machine runs the more probable it will be that some power spike will damage your hard drives.
The next issue i would think of is heat. If your machine has a bad airflow inside the case your risk to damage your CPU or motherboard and HDs. Less heat means longer life for all components. The longer the machine is powered on the longer it components will suffer if heat inside the case is not removed through fans. 2 Big fans, in the front and on the back of the case would be a minimum i think.
I would recommend you to get a good server case (http://www.antec.com, if money ain't a big issue.
Since you already use a Server OS i guess there is nothing much to say about this, it should be pretty reliable and stable.
Last, but not least, are components.
Then components that fail soonest are HDs and PSUs (Power Supply Units).
Usually servers have 2 PSUs, when the first fails the second one jumps in and the first can be replaced. But looking at your specs i don't think you will need to worry about this.
Just keep in mind that a good and powerful PSU lives longer (if you machine consumes, say, an average of 100W and your PSU only delivers 200W MAX it will probably be dead sooner than a PSU that delivers 300W max.
What really matters here is the number of clients on your intranet.
512mb RAM and a single 60gb HD could be a bit weak.
A server OS can be pretty RAM intensive, it runs many services and has to service the clients, so 512mb RAM could turn out to be not enough for a server. Especially if there are quite a few clients logged on the server downloading data over and over again those 512mb could end used up pretty soon. I would say get another 512mb and make 1gb.
The HD is probably the weakest part of a computer, since it is still mechanical, maybe you should consider to make a simple mirror raid with two 60gb HDs.
This way preventing loss of data when you HD will fail.
Your HD will fail sooner or later, because a system that runs 24/7 fails much faster than a PC that is, if it comes up, turned on just 1/3 of a day.
Moreover if you use that server for file sharing, and you have quite some clients on your intranet, that will put your HD under particular stress. Thus producing more heat and failing sooner.
On the other hand if your intranet has only few clients and the server is only used a few times a day you can safely ignore the raid (as long as you keep backups of your data).
If your clients have to transfer data to/from the server only a few times a day you can also turn on the windows power saving for your HD. The HD will be turned of when not needed, this will help to prolong the life of the HD. This will harm performance though (since the HD needs to turn on again when a request comes in), so this is only an option if your intranet is pretty small and your server will not be used frequently.
I hope this will help you out.
Good luck
|
|
|
|
|
r41n© wrote: machines that are on 24/7 usually fail much sooner
That's completely untrue. My wifes old machine was on 24/7 for over 8 years without so much as a hiccup. That machine was replaced simply because it was pretty damn old.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
Can i know what would be the electricity consuption for one desktop pc with 400 watts powersupply. I am talking only about a Processing unit and not monitor.
What was the actual purpose to keep your machine on for 24/7?
Which OS was installed in the machine and what was its config?
Thanks
Nikhil Bandekar
Mumbai,
India
|
|
|
|
|
YOu can buy hardware to measure it. The one I have is called Kill-A-Watt, and can be found online for $25US. No idea about availability in your part of the world. Depending on how many and how highend the parts in the system are probably somewhere between 100-300W average at full CPU load.
--
You have to explain to them [VB coders] what you mean by "typed". their first response is likely to be something like, "Of course my code is typed. Do you think i magically project it onto the screen with the power of my mind?" --- John Simmons / outlaw programmer
|
|
|
|
|
Nikhil Bandekar wrote: What was the actual purpose to keep your machine on for 24/7?
Because turning it off and on everyday wears out the electronics.
Nikhil Bandekar wrote: Which OS was installed in the machine and what was its config?
Windows 2000 Pro.
The machine was home-built and resided in a full tower case:
AMD Thunderbird 1ghz CPU
Abit BH6 motherboard (or something like that)
768MB of PC133 RAM
two 60gb IDE hard drives
Various video cards
SB Audigy sound card
Netgear 310TX NIC
400w power supply
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
If you drive your car 24/7 or just a few hours a day you will see a big difference, especially for mechanical parts (HDs & FANs), this is the same for every machine. The more it is used the sooner the materials it is made of will get damaged.
Just because your car ran that long it doesn't mean every car will.
|
|
|
|
|
r41n© wrote: ust because your car ran that long it doesn't mean every car will.
Well, duh... I was giving anecdotal evidence that contradicts your theoretical claims.
We're not talking about cars - we're talking about electronics, and we're really not even talking about the fans in a computer. I've been assembling my own systems since 1985, and have been leaving them on 24/7 since 1980. I've *never* had a system fail in all that time.
"Why don't you tie a kerosene-soaked rag around your ankles so the ants won't climb up and eat your candy ass..." - Dale Earnhardt, 1997
-----
"...the staggering layers of obscenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001
|
|
|
|
|
As r41n(C) has already covered the most of the aspect I would like to take up a few more...
o If you are just planning to use it as a File Server which really is a critical job please go for a higher RAM. The reason as the number of concurrent requests will increase the more swapping would be necessary and hence you would unnecessarily stress your HARD DISK...
o Please settle for a SATA disk rather than an IDE which would be cheap and an alternative solution.
o With an 845 Chipset though it is not a Bad Idea to host a File server but it is better you shift off to ICH6 Controlled 945 Mobos which will give better power supply...keep a minimun of 400 W SMPS. Moreover the 945 series will have better on Board RAID Support.
o Whenever you host any server your prime objective would be least maintainance and less failures and MTTR(Mean Time to Recover). So once your Server goes online 24x7 it means it is under less monitoring and more prone to attacks. Have stringent firewalls and also keep a day in a week as maintainance time where u can monitor the health of the disk.
o By your config it looks that you are trying to shunt an Old PC but then you are making it useful as a File Server...So if u don't mind spending a few more bucks please settle for 7200 RPM disk which will reduce the latency time for transactions...
o Now coming back to your Original question...any equipment running 24x7 has few enemies...
oUse heat conducting gels b/w ur CPU and Heat Sink...have a very good ventilation...keep a watch that no fans fail.
oRefrain from stashing the PC(Server) at an unnoticed corner as u would feel it is just a file server, better keep a watch from rat/lizard/ant infestations(believe me I have seen hard disks crashing due to ant infestation)
oMost important the power supply robust. Don't let it suffer any electrical surges.
Happy Computing
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
|
It’s really very helpful information from both of you. I have noted down your suggestions. But now I am into two minds. What if I purchase an entry level server, it can solve my purpose with less investment and it will also be reliable as well. If I go with the same old machine I will have to upgrade it as suggested. I have minimum 60 users for accessing the same set server. So which entry level server do you recommend?
Thanks for you Reply
Nikhil Bandekar
Mumbai,
India
|
|
|
|
|
great!!! you are thinking absolutely right pal
60 Users are not really a less to find. If they concurrently access the server then you might be in trouble too. and overhead charges for securing your system would really cost you something in which u can really settle for a dedicated server.
If you really wabt to go for an entry level server you can buy in around 30K
http://dellstoreroa02.sg.dell.com/public/cart/configurator.jsp?prd_id=41167&sr_no=1[^]
or else with robust functionalities and as well rack mounted 1U server then go for 93k
http://dellstoreroa02.sg.dell.com/public/cart/configurator.jsp?prd_id=41174&sr_no=2[^]
I know the latter is a bit costly but it all is in ur needs
Hope I could help you out.
Please revert back for further details
There are only two kinds of people who are really fascinating-people who know absolutely everything, and people who know absolutely nothing.
Oscar Wilde (1854-1900)
Regards...
Shouvik
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
