|
I have a window service and i have a Web Service reference in it.
The web service is on a local machine which is in my network.
The app.config file of the window service is containing the key for the web service.
When i make setup of the window service the its not dynamically changing the machine name even when i change the key in the config. During the run of the service it says cant find the machine "acb" which is name of the machine which is in my local network from where i was referring the web service.
When i try to find out what is wrong i find that in the Project there is a Folder My Project Which is Containing a file Settings.settings Which is containing a key for that web servce. any Idea How That can be made dynamic
Regards
Regards
|
|
|
|
|
I can't figure out what you're talking about.
Are you saying that you have two versions of this web service?? One for test and another for production?? The windows service you wrote is supposed to use the production web service, but you developed against the test service?
|
|
|
|
|
I have an application that was developed in vb6 i have packaged it using The Vb package and deployment wizard. The problem is that when i try to install it on some machines it brings an error during installation that some system files are old.................
My question is is there any tool that i can use to package the application for it to be able to instal on XP, 2000 and 2003 without bringing problems?
briogene
|
|
|
|
|
|
Try and using INO setup it is a GNU application for creation of setup
|
|
|
|
|
how can i send sms thru my mobile using USB port. can any body help me
thanks and regards
kishore
|
|
|
|
|
How you do that depends entirely on how the phone shows up when connected to the machine. Does it show up as a COM port? What commands does it understand?? What is it with newbies and cell phone projects??
|
|
|
|
|
You can send SMS through your mobile phone's built in GSM modem but you have to connect it to your computer through an infrared connection, I'm not sure whether a modem can be connected to a computer through a USB cable you can see your phone's reference manual for this purpose. You can easily send SMS by using AT commands or you can also use the .NET Phone Communication Library for this purpose.
AliAmjad(MCP)
|
|
|
|
|
i want to connect with usb port. can any body help me
thanks and regards
kishore
|
|
|
|
|
The question isn't valid. You don't connect to the bus, you have to talk to a device connected to it using the devices SDK, or some other "generic" method, depending on the device you want.
|
|
|
|
|
Dear all
I want to save a image available im Image comtrol in VB6, I used the Savepicture method but it save the image in his orignal size which is 3000*1500 but i want to save this image into 100*100 means i want to save images with my required height & width, So plz help me to solve this problem
With regards
yogesh agarwal
|
|
|
|
|
|
setup: I have an midparent with on it an ribbon (custom control) and space for the mdichildren
normally I can access the ribbonbuttons from the forms but I have one form that's not in the project (and can't be included there) so it can not access the ribbonbuttons. But I have to disable them.
So I figured I'll do it in the mdichildactivate of the mdiparent.
But when I compare the types of forms the code in the if (or select case) always gets run. Nomather what I compare.
Private Sub frmMain_MdiChildActivate(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.MdiChildActivate
Dim frm As Form = Me.ActiveMdiChild
Dim s As String = "jorosoft.frmagenda" 'frm.GetType.ToString.ToLower
Dim ss As String = "joro.reports.showreport" 'GetType(joro.reports.Showreport).ToString.ToLower
If s.Equals(ss) = True Then
clsGlobals.MDIParent.rbSearch.Enabled = False
End If
End Sub
when I debug the programme it tells me that 's.Equals(ss)' = false but still the code within the if gets run.
Anybody has encounterd the same??
If my help was helpfull let me know, if not let me know why.
The only way we learn is by making mistakes.
|
|
|
|
|
Do't use strings to compare types. Compare the object against a type
If TypeOf Me.ActiveMdiChild Is frmAgenda Then
' I'm assuming that this code is on the MdiParent form...
Me.rdSearch.Enabled = False
End If
|
|
|
|
|
I did that first but because the code always got run I tryed it with string as I posted.
I tryed you'r code and still get the same result.
The strange thing about it is even if you invert the condition the code also get's run. So nomatter what the outcome of my condition is the code inside the if gets run
If TypeOf Me.ActiveMdiChild Is frmAgenda Then
' I'm assuming that this code is on the MdiParent form...
Me.rdSearch.Enabled = False
End If
and
If not TypeOf Me.ActiveMdiChild Is frmAgenda Then
' I'm assuming that this code is on the MdiParent form...
Me.rdSearch.Enabled = False
End If
both result in me.rdsearch.enabled = false
If my help was helpfull let me know, if not let me know why.
The only way we learn is by making mistakes.
|
|
|
|
|
Do the child forms in question derive from frmAgenda at all??
Did you trace through the code step-by-step and watch these sections execute??
Are there any other places where the status of the rbsearch can be set/reset??
|
|
|
|
|
I'v found a way to do it with an custom event but still I'm puzzeld because when I step through the code
it tells me that 'me.mdiactivechild is frmagenda' equals 'false' (checked it with quick watch) but still the code inside the if gets run
setup of the forms:
each mdichild has an ancester and that ancester has another ancester but the form that I need to check frmagenda doesn't have any ancesters so normally I should be able to check against that (I think)
If my help was helpfull let me know, if not let me know why.
The only way we learn is by making mistakes.
|
|
|
|
|
I don't know what it is. There's something about the code you've left out. I can't duplicate the problem in a quick app I've written up.
|
|
|
|
|
I know I'v been trying to duplicate it in anothere app and can't do it neither.
Anyway since I'v found an alternitive that I like I'm not going to spend to much time on it.
Thanks for you time and help
(If I find out why this is happening I'll let you know)
If my help was helpfull let me know, if not let me know why.
The only way we learn is by making mistakes.
|
|
|
|
|
How to find out the installed version of MS Power Point from registry? I am going to build an app in which i have to check out the installed version of the MS power point onthe client machine. How can I do this?
Regards, Qaiser Nadeem
|
|
|
|
|
You can check this key
HKEY_CURRENT_USER\Software\Microsoft\Office\x.x where x.x is the version.
AliAmjad(MCP)
|
|
|
|
|
I don know if this is the right place to ask this question. Anyway can anyone plz help me with the best of the above options...av bn into vb.net to vb2005 and asp.net and would like to get certified, but am confused as to which of the above certs. Any help
phatkin
|
|
|
|
|
They are all a waste of time. It's too easy to cheat to get them, so they mean nothing. If you feel that in your local job market they are respected, then ask the people you're talking to, which one they respect more.
Christian Graus - Microsoft MVP - C++
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
prubyholl wrote: vb2005 and asp.net and would like to get certified, but am confused as to which of the above certs.
If you are using VB.NET 2005 you should be looking at MCTS and MCPD certs.
Unlike Christian I do place value on certification. But ONLY if it is done properly where you actually learn stuff and can apply it. I will still test you at an interview so I will know if you learned it or just cheated on the exam (or were lucky)
Many companies will place value on certification as it means that they get extra points in the Microsoft Partner programme. So, in those cases it will make you more attractive to those companies.
|
|
|
|
|
i have soml xml files generated in my local msde during net failure, and when net is back i want to get the values from local msde to servers database, i really got stucked in this point, help me out
thanks in advance
Ramkumar S
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
