|
General strategy might be to loop through each of the words in the long string. When the first word of the desired red string is found then find the position in the string of the first letter of that word and remember it. When the second word is found then find the position of the last letter of that word. At this point select the text between the first position and the second position and color it red... then continue.
I noticed that you can't repeat the same word as the first or last word in the desired string or you'll get a problem.
for instance:
"I want to have this code be the selected code" (in red)
"I, code" creates a problem
cs
|
|
|
|
|
Uhm... ok. Ill try it out but i don't think ill be able to get it to work though. This is kinda difficult. 
http://www.themightyatom.nl
|
|
|
|
|
I'd suggest doing anything like colouring when you're adding the text to the control, not afterwards. Then it's much easier to identify the string you're adding, so you don't have to search for words or worry about whether the 'end words' in your error message will be found somewhere else in the control and make your code 'find' the wrong stuff.
I'd also suggest using a new line for each message, and maybe starting the lines with some standard bit that indicates whether they're errors, warnings, or something else.
This would identify the errors by something other than colour, which is often a good idea.
If "rich text" includes tables, then 'message type' could be column 1 and the detail would go in column 2.
|
|
|
|
|
Hmmm, to tell you the truth, im not really sure if i can do all that, im still a beginner Vb'er, you see. This sounds kind of advanced and difficult (for me that is).
Maybe you can provide me with an example or something that i can work out?
Ill include your name in my app when i release it.
http://www.themightyatom.nl
|
|
|
|
|
I've never used rich text boxes for serious work, but:
The control should have facilities for setting the "selection" (the equivalent of the currently selected text in Word, Notepad or anything between) and for formatting the selection. When you add text to the end of the control you may well find that the added text is the selection, or can be made to be the selection as part of the adding process.
You need to look for documentation about using the control, and/or some sample applications using it. Googling for
rich text "visual basic" sample
should find you lots of stuff.
(preferably replace "visual basic" with something like "visual basic 2005" to identify the version you're using).
|
|
|
|
|
Ill try that, thanks.
http://www.themightyatom.nl
|
|
|
|
|
Just curious...
With New Form1<br />
.Property<br />
.Method<br />
End With
It creates a variable that is automatically released when the "end with" is encountered.
Any known memory leak doing this?
Thanks,
Nathan
|
|
|
|
|
Hi,
AFAIK the With construct is just a shorthand notation, it does not "release" anything,
so if the object needs disposing of closing you should call Dispose() or Close() explicitly
when you no longer need it, to avoid memory leaks.
Luc Pattyn [Forum Guidelines] [My Articles]
this months tips:
- before you ask a question here, search CodeProject, then Google
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get
- use PRE tags to preserve formatting when showing multi-line code snippets
|
|
|
|
|
in this context it would be "released" because it's a block variable. when the block is done the variable is released. i agree property clean up needs to be done just curious if this something that while dotnet allows isn't handled properly (memory leak).
|
|
|
|
|
No,
(I am assuming the .Method you called is not Close)
once the with block ends, the way you wrote it the object can no longer be accessed
since you don't hold a reference to it, but that does not mean the object also gets
removed from memory at that time; the garbage collector will take care of that at its
leasure, it is allowed to do so immediately but will not do so unless it needs free
memory due to some other request(s). In the mean time any resources (managed or unmanaged)
remain allocated.
Luc Pattyn [Forum Guidelines] [My Articles]
this months tips:
- before you ask a question here, search CodeProject, then Google
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get
- use PRE tags to preserve formatting when showing multi-line code snippets
|
|
|
|
|
I suggest you do some reading on the core of .NET.
Nice to see VB finally has this sort of syntax, it took you guys a while.
Christian Graus - Microsoft MVP - C++
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
I'm very fimilar with vb so what do you suggest I look at - the 'core' is a little vague.
baby steps baby steps 
|
|
|
|
|
Hi Christian,
the with statement "executes a series of statements on a single object" and exists
in VB6 and probably even more ancient versions too, but it does not resemble the
using statement we all enjoy in C#, it is just a shorthand avoiding the repetition
of the object's name in every line, as in
With MyLabel
.Height = 2000
.Width = 2000
.Caption = "This is MyLabel"
End With
Luc Pattyn [Forum Guidelines] [My Articles]
this months tips:
- before you ask a question here, search CodeProject, then Google
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get
- use PRE tags to preserve formatting when showing multi-line code snippets
|
|
|
|
|
Hi Nathan,
There's no memory leak in your code. After your code leaves the With block, there are no live references to the Form1 instance, so eventually the garbage collector will kick-in and release both memory & native windows resources associated with the form (.net forms and controls are actually wrappers of native windows resources).
When this collection actually happens, is not under your control, unless you call GC.Collect(); however this is not something recommended since it prevents the garbage collector to self-tune adequately to your application's memory consumption rate - in simpler words - even though by calling GC.Collect() all "releasable" memory is reclaimed and released *at your request*, this is a very expensive operation and in the end you might hurt your application's performance very badly.
However, I would suggest calling .Dispose() before leaving the with block. This way you will be releasing the form's wrapped native windows resources early (something advisable since windows resources are limited). Keep in mind that even if you call Dispose(), the memory held by the Form1 instance will not be freed until the garbage collector runs and reclaims it.
Sincererly I hope I have clarified your doubt and not confused you more. 
Gerardo
|
|
|
|
|
|
Hello,
I need a commandbutton that i colored red or green to blink.
Does anyone know how i can do this ?
Is this a standard function in VB 2005.
Thanks
Didier
|
|
|
|
|
|
Use a system timer that changes the color of the button at time intervals you specify.
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Can I make a chart in Visual Basic 6 in a form.
What kind of reference must I use?
I don't want to make it myself, I mean drawing it myself.
|
|
|
|
|
leaveu wrote: Can I make a chart in Visual Basic 6 in a form
Yes. But why use VB6, it is pretty dead these days.
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Hi gurus.
I need to create floor map for each (4 floors) floor in my company new building.
Map should be similar to Google maps i.e. when map is viewed (image) I want to show employee names in their cubicles. When specific person is searched I want to show where he seats (just that person). Employee (name) should be tied to Office Communicator (IM), which shows status of the person. I can get employee information from Active Directory (name, title, email, etc.)
Did anyone have any experience doing this? Any help would be greatly appreciated.
If I didn't explain good enough let me know and I will try as best as I can.
Thank you all,
Alex.
|
|
|
|
|
If you cross-post, it's unlikely you're going to get much help 
Paul Marfleet
"No, his mind is not for rent
To any God or government"
Tom Sawyer - Rush
|
|
|
|
|
This question is for both forums and I don't know how to ask it otherwise.
Instead of just answering the way you did, and wasting your time and mine, you could've answer my question, if you can of course. Then you can let me know that I souldn't have posted it in 2 forums.
Again. I've done it only because I know it can be related to both Forums and I'm not sure people visit both of them like you do.
Thank you,
Alex.
I see that you've posted this response directly to me rather than to the forum.
If you had taken the time to read the forum guidelines, you would know that cross-posting is frowned upon. You shouldn't have to be told this - it's common sense. Cross-posting makes it difficult for people to collaborate on a solution and for other people to find help when searching the forums. I'm not wasting yours or my time by stating this, I'm making you aware of your breach of etiquette. As rule 1 in the forum guidelines states - choose the most appropriate forum for your question and post there only. Your statement that most people don't visit all the forums is irrelevent.
Anyway, what has your question got to do with VB.NET? It's clearly a web development issue.
Paul Marfleet
"No, his mind is not for rent
To any God or government"
Tom Sawyer - Rush
|
|
|
|
|
Yeah. I know it is. But had web questions answered to me in this Forum before. Sometimes you can get a good idea/push from people in here. Sorry for the breach of etiquette. Usually I don't do this. I really need to make my problem work and right now I'm not even sure how to start.
Tanks, Alex.
|
|
|
|
|
I have setup my EXE(it's like a main menu calling other apps or assemblies) to use mutex for checking if another instance of the exe is running...this all works correctly. I have another access point into the mutex logic from the browser -- it runs different logic having the original exe start the requested application. This works correctly 90% of the time. On occasion even though the original exe is running, the TCPChannel will become disconnected -- without explanation. The only location that the actual disconnection logic exists in the code is in the dispose routine. I put logging in there marking sure that routine wasn't being called and it is not.
What is disconnecting the channel? Is there some unknown timeout I didn't notice?
Thanks.
Nathan
-- modified at 14:28 Wednesday 28th November, 2007
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
