|
My guess is that you are doing something like :
void CMyFormView::OnSize(UINT nType, int cx, int cy)
{
m_MyEditCtrl.MoveWindow(cx - EditCtrlWidth, 50, EditCtrlWidth, EditCtrlHeight);
... in order to place the edit control at the right edge, 50 pixels from the top.
What you have to do is call GetScrollPosition() to figure the scrolling into the calculation
void CMyFormView::OnSize(UINT nType, int cx, int cy)
{
int HScrollDistance = GetScrollPosition().y;
m_MyEditCtrl.MoveWindow(cx - EditCtrlWidth, 50 - HScrollDistance, EditCtrlWidth, EditCtrlHeight);
...
HTH
---
CPUA 0x5041
Sonork 100.11743 Chicken Little
Within you lies the power for good - Use it!
|
|
|
|
|
I am totally overwhelmed. I have been so stressed out over this, and was going to do a dialog based app instead of the cool mDI, and this was really distressing. I've tried your solution on one of my boxes and its behaving wonderfully. I wont breathe until I check it out on the whole UI but I am most hopeful!
You have saved my life literally! I am very grateful.
I had looked around for some function like this but it wasnt in the class wizard or in the members of the class CView either...where is it inherited from?
ANother associated question. This has been happening with my editboxes so I have to do something like(to prevent a debug assert). If I dont put your statement inside the if, it debug asserts. If I didnt have an editbox I was checking for, how would I have handled the assert? Which objects GetSafeHWnd would I test? I dont know if this is clear but its something I'd like to know about, if you have any ideas why....
if( NULL != m_editright.GetSafeHwnd() )
{
int VScrollDistance = GetScrollPosition().y;
m_editright.MoveWindow(cx - 200, 50 - VScrollDistance, 200, 200);
// m_editright.MoveWindow(cx-200,360,200, cy-60);
}
Thank you,
ns
|
|
|
|
|
ns wrote:
where is it inherited from?
CObject
-CCmdTarget
--CWnd
---CView
----CScrollView
-----CFormView
GetScrollPosition is a member of CScrollView
ns wrote:
ANother associated question
I should have remembered this, but it has been a while since i did something like this.
OnSize is called when the form is first created, before any of it's child controls are created. So you are right, you will get ASSERT's if you try to access nonexistant child controls. You are handling the situation correctly.
HTH
---
CPUA 0x5041
Sonork 100.11743 Chicken Little
Within you lies the power for good - Use it!
|
|
|
|
|
Its the same with setwindowpos. I have a control I want to "attach " to the right edge of the CFormView in my MDI. I do this with movewindow in onSize, and set the y top as say 10 - some fixed value. This form is scrollable. Now when I scroll the control off the screen and resize, it immediately pops back into view - 10 pixels from the top edge, leaving a big blank space above it - the area that had been scrolled off. So it thinks its supposed to be at 10 pixels from the top, and repositions itself, leaving a blank gap above. I am deeply troubled by this. Help!!!
Thanks,
ns
|
|
|
|
|
Hey, I have a question regarding the windows message EM_SETCHARFORMAT. I am trying to use this and I am having a problem. I have a text editor and it allows the user to set the text to different fonts. This works but if, for example, there are 5 lines of text, each line has a different font, when I highlight all 5 lines and try to change the font, it only changes the font of the first selected line, not all 5 lines. Any idea what is causing this, the carriage return perhaps? How do I fix this so it will change the font for all the lines?
|
|
|
|
|
1.
How can I change font of a CFileDialog in MFC application and OPENFILENAME in Win32 Application ?
Hung Son
A Vietnamese student
i-g.hypermart.net
dlhson2001@yahoo.com
|
|
|
|
|
In MSDN, I found a samples: ChatSvr and Chatter. That is a network application using CSocket. But I don't know how to use CSocket in multithread. In ChatSvr, I want to throw each client connecting to server to a particular thread. It means server will manage each client ( and his socket) in 1 thread. How can I do that ?
I imagine the code for solving this problem may be like this:
void CServerDoc::ProcessPendingAccept()
{
CClientSocket* pSocket = new CClientSocket(this);
if (m_pSocket->Accept(*pSocket))
{
pSocket->Init();
m_connectionList.AddTail(pSocket);
//Add this line:
m_threadList.Add(....);
//or
AfxBeginThread(....);
}
else
delete pSocket;
}
Hung Son
A Vietnamese student
i-g.hypermart.net
dlhson2001@yahoo.com
|
|
|
|
|
I've created two regions with the CRgn class and the function CreatePolygonRgn. I then use the CombineRgn function to take the intesection of the two regions created with CreatePolygonRgn. I now need to turn the resulting region into a polygon.
I've been trying to use the GetRegionData function to return the points that make up the region. But I'm not having a success. The function keeps returning NULL for the RGNDATA pointer. Here is what I did:
RGNDATA* pRgnData;
x=aRgn.GetRegionData(NULL,1);
y=aRgn.GetRegionData(pRgnData,x);
pRgnData is still NULL.
What am I doing wrong?
|
|
|
|
|
YOU've got to allocate the buffer into which OS will put the region data. If you pass it your null pointer, it will tell you how space you should allocate for the buffer. The example above is passing an undefined pointer.
e.g.
DWORD x=aRgn.GetRegionData(NULL,1);
RGNDATA* pRgnData=(RGNDATA*)malloc(x);
DWORD y=aRgn.GetRegionData(pRgnData,x);
|
|
|
|
|
Thanks Scott. I'll try that.
Paul
|
|
|
|
|
Hello,
As I still have problem to print my MSChart ActiveX, I should have several work around:
1) Use the MsChart.EditCopy to copy my graph in the clipboard in a metafile format and print it from clipboard
2) capture the part of the dialog screen containing my graph and print it
But the question remains the same : how do I print a graphical object ( or a metafile or directly a MSChart) ?
And with solution 2), how do I capture this part of my screen, under which form and how do I print it ?
Thanks in advance for your help
DD
|
|
|
|
|
Qadddd wrote:
But the question remains the same : how do I print a graphical object ( or a metafile or directly a MSChart) ?
A graphical object can be selected into a DC. Just blit it to the printer DC.
A metafile can be played back to a DC using PlayEnhMetaFile.
|
|
|
|
|
hello,
to be clear in my mind, do you have any code example that perform this kind of operation.
I have to say that I am not a specialist in VC++ and that playing with printers (apart some easy prints in text mode) is quite new for me.
I looked on the web and found no example for metafile play on a printer DC, they are all destinated to a rect, so a screen so it seems that I can't use this solution.
No solution for the screen capture in a rect object that could be printed ?
Thanks in advance
DD
|
|
|
|
|
Qadddd wrote:
I have to say that I am not a specialist in VC++
You don't have to be. This is basic Win32 API programming.
I looked on the web and found no example
You looked in the wrong place (or with the wrong search phrase(s)). Try looking at MSDN and the samples there.
|
|
|
|
|
>>You don't have to be. This is basic Win32 API programming.
there are so many other things more interesting than printing ...
I am just learning and coding in VC++ by myself, the night at home, and loos e so much time on a single problem like this one ... and have some many other things to do ...
>>You looked in the wrong place (or with the wrong search phrase(s)).
I am not a specialist from the web neither, i use google and then jump in the thousands links or post some question on forums after having searched for a solution in already existing posts. What's the right phrase to print in vc++ an chart produced by an activeX Mschart? Try by yourself and we'll see if you are more lucky or efficient than me 
>>Try looking at MSDN and the samples there.
there so many articles, the one more complicated than the other. It is simple, when I want to find something in MSDN, I never find it. Print for example, there is no simple doc explaining the right way to do it with a good significative example (at least when you search with their "search for"). another thing, I am coding in vc++, I don't give a damn about article talking of VB or other . Try to find out how to print chart produced by using a MsChart activeX, the only info I found is for VB. Try to search in the newsgroup, this question appear several times for at least 2 years, but there is no answer neither from students nor from microsoft ...
Frankly, I don't understand why there is no "Print" method as there is an "EditCopy" method ... or at least the explanation to do it.
DD
|
|
|
|
|
the only command I know if is itoa and that requires a second or third convesion before I end up with a MFC useable CString. I read a post saying something about using the Format command but I have been unable to get it to work.
Can anyone help?
Thanks
Eric
|
|
|
|
|
CString str;
int i = 100;
str.Format("%d", i);
that's it. it's just like printf/sprintf.
-c
To explain Donald Knuth's relevance to computing is like explaining Paul's relevance to the Catholic Church. He isn't God, he isn't the Son of God, but he was sent by God to explain God to the masses.
/. #3848917
|
|
|
|
|
|
hello,
I use the Format method of class CString.
MyCstring.Format("%d",MyInt);
Can be used with several formats and justification.
Idem for dates presentation as CString:
MyDate.Format("%.2d/%.2d/%.4d",MyDAy,MyMonth,MyYear);
DD
|
|
|
|
|
|
Hi...
I want to add text in a CEdit control.
NOT ReplaceSel or SetWindowText... Only Add in the end of the current text...
Thanks world !!! 
Hello World!!! 
from Raphaël
|
|
|
|
|
As stupidly it sounds, but Read old text, add your String to it, and write String back. For example
CString s;
MyEdit.GetWindowText(s);
s+='abcd';
MyEdit.SetWindowText(s);
It is a unique way. If you want to save caret position, do it manually. The better way is to write own heritable controls as CEditEx, CListBoxEx, and to place all needed routines like that into them. You will make it once and will be happy many years.
|
|
|
|
|
I think that's a good idea... CEditEx... Yes... I'll do that...
But I'll use (Nevertheless) this method:
MyEdit.SetSel(-2, -1);
MyEdit.Replace(MyText);
Thank you very much 
Hello World!!!
from Raphaël
|
|
|
|
|
Please Help, very little experience with MDI apps!!
I'm looking for information regarding opening, closing, initializing data, etc.. in an MDI application. I want to be able to open a child window and initialize the fields with data from other apps. I can currently open the MDI application and initialize it with the information in shared memory, but I would like to be able to keep the MDI app open and just open different child frames with the data that I send over from other apps. The opening my already defined view part is throwing me. I found and example on creating a new view but nothing on an already defined view.
Again I am new at MDI apps and looking for good information on dealing with the different child frames.
Thanks in advance for any help that you can provide.
Steve
|
|
|
|
|
Hi, l am writing a GUI using MFC, and l need to include some graphical features in it. Does anyone know how to plot graphs using MFC? All l need is something that plots points from a table of data, not from a function. It also doesn't need to be interactive -- basically l need just the most simple kind.
Any suggestions will be appreciated.
Thanks!!
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
