|
Hi Spacix,
you're welcome.
3.
To yield CPU cycles for the duration of the system tick, a Thread.Sleep(0) is recommended.
4,6.
You didn't tell about USB and EE before, I now see why you did what you did.
I'm still not convinced there is a need to do it this way tho, AFAIK running timers (i.e. not
stopped/disabled) and threads (foreground and background ones) remain active even if you don't
have any live references to them any more (except that the last foreground thread reaching
its exit will cause app exit). For timers it is well documented; for threads I don't know
if/where it is stated explicitly, the only thing I noticed is there is no Thread.Dispose()
so I expect the "physical" thread to live on independent of the "logical" Thread object.
7.
I would suggest you create a "myUsbDevice" class that encapsulates all relevant code,
including the thread stuff, and the dont-interrupt-EE-writing logic. You might give it an IsBusy()
or a WaitTillDone() method and give your form a FormClosing event, where you wait until
myUsbDevice.IsBusy() returns false or 3 seconds have elasped (easiest is to read DateTime.Now
in a yielding loop).
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
I recently noticed that some of the code I wrote does not work as I expected; Namely, when attempting to reflectively set the value of a property on a value type, nothing happens (because it is passed to SetValue by value instead of by reference). I am wondering if there is a way to make the following set the value of the property UniqueId.
public struct foo {
...
public int UniqueId {
get { return m_Id; }
set { m_Id = value; }
}
...
}
public foo CreateFoo() {
foo rval = new foo();
PropertyInfo pi = typeof(foo).GetProperty("UniqueId");
if (pi != null) {
pi.SetValue(rval, 7, null);
}
return rval;
}I know that in the example, there is no need for reflection. However, the example is just an extreme simplification of my code to illustrate the problem. Once again, my question is, "Is there some way to modify the line 'pi.SetValue(rval, 7, null)' such that rval.UniqueId will equal 7 after the reflective call". Not using reflection to set the value cannot be implemented given the current code. Thanks in advance,
Sounds like somebody's got a case of the Mondays
-Jeff
|
|
|
|
|
Got it! I have to box the object myself as follows:
public foo CreateFoo() {
object rval = new foo();
PropertyInfo pi = typeof(foo).GetProperty("UniqueId");
if (pi != null)
pi.SetValue(rval, 7, null);
return (foo)rval;
}Hope this helps someone else!
Sounds like somebody's got a case of the Mondays
-Jeff
|
|
|
|
|
And that worked? I tried
foo rval = new foo();
object item = rval ;
pi.SetValue( item, 7, null) ;
and it was no better.
I just tried your way and I see it works.
|
|
|
|
|
Huh, that is odd. The documentation doesn't say it won't work for structs, the closest statement to that is:
"
To use the SetValue method, first get a Type object that represents the class.
"
Does this mean it only works for classes? 
|
|
|
|
|
Well, technically it IS setting the value, the only problem is that it is setting the value on a copy of the struct passed in, so the changes are lost the instant the SetValue method returns. Oh well, at least I got it to work. Thanks,
Sounds like somebody's got a case of the Mondays
-Jeff
|
|
|
|
|
I was looking for a program that would output to the port and found Levent Saltuklaroglu’s I/O Ports Uncensored - 1 - Controlling LEDs with Parallel Port. It’s a great program, works nice.
I've been playing with the source code he uploaded with it to get a slightly different outcome from some of the buttons. Turns out, I haven't been able to compile it, not even his original code. I get an error message "missing partial modifier on declaration of type 'led.form1'; another partial declaration of this type exists". I was hoping someone could help me with this.
I'm using Microsoft Visual Studio C# 2008 express edition. I've also copy and pasted his code into a new Windowsformapplication1 window.
Is there a better way?
|
|
|
|
|
highly doubtful his project was written in 2008, probably 2003, before partial classes existed. Sounds like VS2008 has created the partial class for control autogenerated code, try just adding the word 'partial' before the word 'class' ( or perhaps after ) and see if it compiles.
Christian Graus - Microsoft MVP - C++
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
Hi
I have problem with data table in C#.In the code below i have data table which contains some values. "dt" is DataTable object and "dr" is DataRow[] object. when i fire some query on datatable using select method, it returns some datarows which fulfill the expression. And when i modify any column value of datarow like column "ID" it also modifies the values in datatable dt.
Can you tell me why this is happening? I don't want to modify values in datatable dt.
Thank you.
Class prog
{
static void Main(string[] args)
{
dr = dt.Select(expression);
dr[0]["ID"] = 10;
}
}
|
|
|
|
|
dalbhide bipin,
The datarow references the datatable, so they are "one". Why are you trying to only edit the datarow and not the table? eg: What are you doing?
Regards,
Gareth.
|
|
|
|
|
|
I am instianting an array of MyControl but after instianting my mc[0] is null. I don't understand it. shouldn't it has Width 100 and Height 100
MyControl[] mc = new MyControl[5];
public class MyControl:Control
{
public MyControl()
{
this.Width=100;
this.Height=100;
}
}
Thanks
|
|
|
|
|
You've instantiated an array to hold 5 MyControls. You still have to instantiate the controls and add them to the array.
/ravi
|
|
|
|
|
try
MyControl[] mc = new MyControl[5] { new MyControl(), new MyControl(), new MyControl(), new MyControl(), new MyControl() };
that will allocate an array of MyControl instances and then also initialize the array slots.
Silence is the voice of complicity.
Strange women lying in ponds distributing swords is no basis for a system of government. -- monty python
Might I suggest that the universe was always the size of the cosmos. It is just that at one point the cosmos was the size of a marble. -- Colin Angus Mackay
|
|
|
|
|
hi to all.
I m creating website blocker and i don't have any idea that how to this.
can anybody send me information about this or link in C# or any algorithm
thanks to all
|
|
|
|
|
One way to do this is to programatically edit the hosts.txt file, althought that's a really cheesy solution. 
A better way would be to intercept network traffic (like a firewall) and selectively allow connections. Or, you could leverage the Windows firewall - see this[^] article.
/ravi
|
|
|
|
|
Mahmood Abbasi wrote: hi to all.
I m creating website blocker and i don't have any idea that how to this.
can anybody send me information about this or link in C# or any algorithm
thanks to all
Why would we do that? You need to learn how to break the problems down for yourself - you need to be able to analyse items and do research for yourself. If you don't have any idea how to do this, why would you want to tackle such a complex area? I'm not asking this to be nasty - I'm just curious as to why you're wanting to do this.
|
|
|
|
|
well u said that if it is difficult then y r u doing this. SO friend if this was not difficult then y i aske people for help .
And about ur second question so i must do this,because i m student and its my semester project . So its unable to leave it.
How to block network IP's or Web site in C# if anybody knows or any body have some peace of code send me .
thanks 2 every body.
|
|
|
|
|
Please learn English. ur is not a word.
If it's your semester project then either you chose it, and should have chosen something you knew how to do, or you were given it, in which case you have materials to tell you how to do it. We'd love to help if you have specific questions, but not if you want to be told how to do your project from the top down.
Christian Graus - Microsoft MVP - C++
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
look at http://www.privoxy.org/
It's not C#, but it'll get you something to look at to get an idea of where to start.
Good luck.
Silence is the voice of complicity.
Strange women lying in ponds distributing swords is no basis for a system of government. -- monty python
Might I suggest that the universe was always the size of the cosmos. It is just that at one point the cosmos was the size of a marble. -- Colin Angus Mackay
|
|
|
|
|
All of us have probably ran into this before. You disable a control for some reason or another and would like to let the user know what they did to make this control turn grey or what they can do to enable it again. Sadly, doing it with a tooltip in one or two lines of code is right out because the OnMouseEnter method checks the ButtonBase state for certain flags before rendering the tool tip.
I tried dancing with this problem today by overloading the CheckBox control and forcing the OnMouseEnter function to fire. I realized, then that I had to overload ButtonBase as well.
Not wanting to rewrite an entire class in the framework, I decided to use the old fallback of using the MouseMove event and checking its location.
That was my solution for this today. Anyone ever find a better solution? I hear WPF has built in support for this sort of thing.
|
|
|
|
|
Tooltips seem to render fine for me on disabled controls.
/ravi
|
|
|
|
|
Hmm, are you running 3.0? If so, that's one more reason to migrate.
|
|
|
|
|
|
How is that possible unless you have custom code. From msdn for 3.5:
ToolTip text is not displayed for controls that are disabled.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
