Re: Easy question - C# Discussion Boards

leppie1-Aug-02 4:07

leppie

1-Aug-02 4:07

Hi,

I would drop a panel in there, set it to DockStyle.Fill, then set its borders up like you want to. Then drop the rest of the control inside the panel. Smile | :)

Hope this helps

MYrc : A .NET IRC client with C# Plugin Capabilities. See
http://sourceforge.net/projects/myrc for more info. Big Grin | :-D

Re: Custom control question

pankajdaga1-Aug-02 4:15

pankajdaga

1-Aug-02 4:15

There is just one problem.

This control represents a resource in an experiment. I would have multiple resources one after the other and they would be stacked in that order. So, I would have to have a panel for every resource that I add. I think this could be an overkill. Don't you think so? If there was just one control, it would be all right, I think.

Thanks,

Pankaj

Without struggle, there is no progress

Re: Custom control question

leppie1-Aug-02 4:24

leppie

1-Aug-02 4:24

I'm not so sure what u mean, but i dont think there should be a problem.

Best is to try it. It would only require a few extra lines in the control, so trying isnt an issue Smile | :)

pankajdaga wrote:
Without struggle, there is no progress

Big Grin | :-D

MYrc : A .NET IRC client with C# Plugin Capabilities. See
http://sourceforge.net/projects/myrc for more info. Big Grin | :-D

Re: Custom control question

pankajdaga1-Aug-02 4:56

pankajdaga

1-Aug-02 4:56

Hey again,

I tried it and it works, no problem. However, the problem is that I have multiple controls ( typically 100 or so, can run higher) that I instantiate at run-time. I think it would be a lot of overhead to add a panel for each of them.

Since, I only need a black frame around it, I just draw lines at the edges of the control and that works fine Smile | :)

Thanks for the help though. This solution is perfect if you have only a few controls on the form Smile | :)

Pankaj

Without struggle, there is no progress

Re: Custom control question

Nnamdi Onyeyiri1-Aug-02 8:02

Nnamdi Onyeyiri

1-Aug-02 8:02

pankajdaga wrote:

Since, I only need a black frame around it, I just draw lines at the edges of the control and that works fine

thats wot I was gonna advise until I read the whole post.

Suspicious | :suss: Email: theeclypse@hotmail.com URL: http://www.onyeyiri.co.uk
"All programmers are playwrights and all computers are lousy actors."

Re: Custom control question

Firoz1-Aug-02 20:28

Firoz

1-Aug-02 20:28

Hi,

Try the DrawBorder() or DrawBorder3D() Methods of the ControlPaint class.

Thanks,

FiroZ

Easy question

Alexandru Savescu1-Aug-02 3:07

Alexandru Savescu

1-Aug-02 3:07

Hello,

I have just started developing an application in C# and I don't know how to validate data in a Text Box. To be exact I want it to accept only numbers. Can that be done somehow automatically?

Thanks!

Best regards,
Alexandru Savescu

Re: Easy question

Christian Graus1-Aug-02 3:16

Christian Graus

1-Aug-02 3:16

Imagine my shock when I was told this is not possible in C#. You have to roll your own solution AFAIK. Yes, I know - what a joke. Ask me about const in C#, I dare you.....

Christian

We're just observing the seasonal migration from VB to VC. Most of these birds will be killed by predators or will die of hunger. Only the best will survive - Tomasz Sowinski 29-07-2002 ( on the number of newbie posters in the VC forum )

Re: Easy question

Alexandru Savescu1-Aug-02 3:19

Alexandru Savescu

1-Aug-02 3:19

So I have to handle the TextChange event and check to see if the user has entered a valid number?

And another off-topic question:
Can I declare const variables in the sharp thing? Big Grin | :-D

Best regards,
Alexandru Savescu

Re: Easy question

Christian Graus1-Aug-02 3:29

Christian Graus

1-Aug-02 3:29

Alexpro wrote:
So I have to handle the TextChange event and check to see if the user has entered a valid number?

Yes - what crap is that ? Are they telling me this ISN'T a Win32 text box coming up ? It sure looks like one, why can't I set the number style on it ?

Alexpro wrote:
Can I declare const variables in the sharp thing?

Yes, if they are known compile time values. But you certainly cannot pass a variable ( which is by reference ) as const. What the HELL is that ? C# is broken.

Christian

We're just observing the seasonal migration from VB to VC. Most of these birds will be killed by predators or will die of hunger. Only the best will survive - Tomasz Sowinski 29-07-2002 ( on the number of newbie posters in the VC forum )

Re: Easy question

Alexandru Savescu1-Aug-02 3:56

Alexandru Savescu

1-Aug-02 3:56

Christian Graus wrote:
Yes - what crap is that ? Are they telling me this ISN'T a Win32 text box coming up ? It sure looks like one, why can't I set the number style on it ?

Yeah, that's odd. Here's what I did:

private void txtctrl_TextChanged(object sender, System.EventArgs e)
{
  String txt = txtctrl.Text;
  try
  {
    int y = Convert.ToInt32(txt);
  }
  catch (FormatException)
  {
    MyBtn.Enabled = false;
    return;
  }
  MyBtn.Enabled = true;
}

It wasn't that difficult after all.

Best regards,
Alexandru Savescu

Re: Easy question

Christian Graus1-Aug-02 13:19

Christian Graus

1-Aug-02 13:19

*grin* I knew it would not be a lot of work, I still think it's dumb that you need to roll such a simple piece of boilerplate code yourself for something so common it's been in there for donkeys years.

Christian

We're just observing the seasonal migration from VB to VC. Most of these birds will be killed by predators or will die of hunger. Only the best will survive - Tomasz Sowinski 29-07-2002 ( on the number of newbie posters in the VC forum )

Re: Easy question

jparsons1-Aug-02 9:04

jparsons

1-Aug-02 9:04

Christian Graus wrote:
Yes - what crap is that ? Are they telling me this ISN'T a Win32 text box coming up ? It sure looks like one, why can't I set the number style on it ?

However using C# makes it simplistic to handle an event such as TextChange and validate that it is a valid number. The code to do the validation is far shorter than the length of this post.

Christian Graus wrote:
Yes, if they are known compile time values. But you certainly cannot pass a variable ( which is by reference ) as const. What the HELL is that ? C# is broken.

Check the dotnet mailing list. There was a length discussion on why they do not currently support this feature.

Jared
jparsons@jparsons.org
www.prism.gatech.edu/~gte477n

Re: Easy question

Christian Graus1-Aug-02 13:22

Christian Graus

1-Aug-02 13:22

jparsons wrote:
However using C# makes it simplistic to handle an event such as TextChange and validate that it is a valid number. The code to do the validation is far shorter than the length of this post.

That isn't the point.

jparsons wrote:
Check the dotnet mailing list. There was a length discussion on why they do not currently support this feature.

Was the gist of it what Eric Gunnerson said when I bought it up ? They decided it was too hard to impliment ? I disgaree, the CLR does not need to support it. The CLR does not support, for example, the difference between out and ref ( is it ref ? I forget ). The C# compiler does that, and supporting a const parameter would be pretty much the same sort of deal in reverse. Instead of making sure I *do* assign a value to this variable, make sure I *don't*.

Christian

We're just observing the seasonal migration from VB to VC. Most of these birds will be killed by predators or will die of hunger. Only the best will survive - Tomasz Sowinski 29-07-2002 ( on the number of newbie posters in the VC forum )

Re: Easy question

James T. Johnson1-Aug-02 3:20

James T. Johnson

1-Aug-02 3:20

Basic validation is done using the Validating and Validated events; however you probably want to stop the user from entering any text at all.

If you inherit from the TextBox class, you can intercept the OnKey* events to stop non-numbers from being entered in.

James

James
"Java is free - and worth every penny." - Christian Graus

Re: Easy question

Andy Smith1-Aug-02 6:36

Andy Smith

1-Aug-02 6:36

yes, and you can use the ErrorProvider component to give the user a good reason as to why it's wrong.

Re: Easy question

mikasa9-Dec-02 5:14

mikasa

9-Dec-02 5:14

Ok, I am going to say no you Can't intercept the Text in the *OnKey* events unless you give me a sample. I have been trying to stop text being entered for days now and I am about to write a Custom handler using the WndProc function.

Basically, the OnKey events don't work. I've set "e.Handled = True" and I've even tried not passing the Argument to the Base Class. Nothing works and whatever Text the user enters goes into the TextBox! WTF | :WTF:

Re: Easy question

James T. Johnson9-Dec-02 6:40

James T. Johnson

9-Dec-02 6:40

Something like this perhaps? Cool | :cool:

protected override void OnKeyPress(KeyPressEventArgs e)
{
    // Control characters
    const char Delete = (char) (int) Keys.Delete;
    const char Backspace = (char) 8;
 
    char key = e.KeyChar;
    string strKey = key.ToString();
 
    System.Globalization.NumberFormatInfo nfi = 
        System.Globalization.NumberFormatInfo.CurrentInfo;
 
    e.Handled = true;
 
    // Allow certain control chars
    if( key == Delete || key == Backspace )
        e.Handled = false;
 
    if( char.IsDigit(key) )
        e.Handled = false;
 
    if( nfi.NumberDecimalSeparator == strKey )
    {
        if( Text.IndexOf(nfi.NumberDecimalSeparator) == -1 )
        e.Handled = false;
    }
 
    if( nfi.NegativeSign == strKey )
    {
        int selStart = SelectionStart;
        int selLength = SelectionLength;
 
        if( Text.IndexOf(nfi.NegativeSign) == -1 )
        {
            Text = nfi.NegativeSign + Text;
 
            SelectionStart = selStart + nfi.NegativeSign.Length;
            SelectionLength = selLength;
        }
        else
        {
            Text = Text.Remove(0, nfi.NegativeSign.Length);
 
            if( selStart == 0 )
            {
                selLength -= nfi.NegativeSign.Length;
 
                SelectionStart = 0;
                SelectionLength = selLength;
            }
            else
            {
                SelectionStart = selStart - 
                    nfi.NegativeSign.Length;
 
                SelectionLength = selLength;
            }
        }
    }
 
    base.OnKeyPress(e);
}

Usage:

Create a class that inherits from System.Windows.Forms.TextBox
Add above method to it
Use in application

HTH,

James

- out of order -

Help me make a decision

swarupdas1-Aug-02 2:48

swarupdas

1-Aug-02 2:48

I am a Senior Developer who has recently been caught up with .NET euphoria.
I am about to write a web based application for Administering IIS Properties like
1) create domains
2) change metabase properties etc just like ISM.

I know how to do this using VBScript or ASP for that matter.
However we want to implement this as .NET application in C# or vb.net or asp.net
I know java(100%), c# ( just started) , VBSctips (good enough), c++ (100%)

Can somebody suggest which would be a better choice for me keeping in mind the following points
1) I do care about performance. I change one check box in IIS properties and save. This should not take irritatingly long time.
This application will be used by many people simultaneously on a windows server. Te most frequent operation will be changing metabase properties.

2) I need to access the following Windows stuff
a) windows users/groups
b) registry ( i can use VBScript if I want to enumerate registry)
c) File System files

3) This application is to be accessed by a known set of people with login/password
Should I use SOAP/XML stuff as well or do I make is a Simple WebApplication
Any Suggestions?

Swarup Das

Re: Help me make a decision

Nnamdi Onyeyiri1-Aug-02 2:52

Nnamdi Onyeyiri

1-Aug-02 2:52

beginner opinion:-

go wiv c#, then post the code, so i can learn from it Smile | :)

Suspicious | :suss: Email: theeclypse@hotmail.com URL: http://www.onyeyiri.co.uk
"All programmers are playwrights and all computers are lousy actors."

Drawing a rounded rect

Nnamdi Onyeyiri1-Aug-02 2:46

Nnamdi Onyeyiri

1-Aug-02 2:46

is there a way to do this? i need a rectangle with rounded corners, but it also needs to be filled in. Help me plz.

Suspicious | :suss: Email: theeclypse@hotmail.com URL: http://www.onyeyiri.co.uk
"All programmers are playwrights and all computers are lousy actors."

Re: Drawing a rounded rect

Christian Graus1-Aug-02 3:16

Christian Graus

1-Aug-02 3:16

I have an article on CP showing how to do this with GDI+.

Christian

We're just observing the seasonal migration from VB to VC. Most of these birds will be killed by predators or will die of hunger. Only the best will survive - Tomasz Sowinski 29-07-2002 ( on the number of newbie posters in the VC forum )

Re: Drawing a rounded rect

Nnamdi Onyeyiri1-Aug-02 3:19

Nnamdi Onyeyiri

1-Aug-02 3:19

il havea look.

Suspicious | :suss: Email: theeclypse@hotmail.com URL: http://www.onyeyiri.co.uk
"All programmers are playwrights and all computers are lousy actors."

Re: Drawing a rounded rect

Nnamdi Onyeyiri1-Aug-02 3:24

Nnamdi Onyeyiri

1-Aug-02 3:24

looks like what i need - thanks.

Suspicious | :suss: Email: theeclypse@hotmail.com URL: http://www.onyeyiri.co.uk
"All programmers are playwrights and all computers are lousy actors."

C# tutorials?

pankajdaga1-Aug-02 0:08

pankajdaga

1-Aug-02 0:08

Hi everyone,

I come mainly from a C++ background. However, I am very interesting in learning C#. I am particularly interested in developing my own GUI controls (seems easier to do it than C++). I am also proficient in Java. Can somebody point me to some tutorials or code samples that can help me? Codes for control subclassing or creating controls and registering them with the designer and stuff would be great!

Thanks,

Pankaj

Without struggle, there is no progress

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.