Possible solution to getting VC++ 2008 compiled apps to run on Win98... - C / C++ / MFC Discussion Boards

Re: Using VC++ 2008 compiler with VC++ 2005, but keep compatibility with Win98 ?

Defenestration24-Jun-08 6:06

24-Jun-08 6:06

Do you just copy the relevant compiler files:

c1.dll
c1xx.dll
c2.dll
cl.exe

or should the whole bin folder be copied ?

Re: Using VC++ 2008 compiler with VC++ 2005, but keep compatibility with Win98 ?

toxcct24-Jun-08 6:18

toxcct

24-Jun-08 6:18

either provide every linked dll or static link the dependencies...

but don't copy the compiler itself !!!

humm, it seems i misunderstood your original question. unfortunately, no, you can't use VC++2005 compiler with VS2008 (or vice versa). but you still can compile an application targetting Win98 with VC++2005 or VC++2008

[VisualCalc][Binary Guide][CommDialogs] | [Forums Guidelines]

Re: Using VC++ 2008 compiler with VC++ 2005, but keep compatibility with Win98 ?

Defenestration24-Jun-08 10:55

Defenestration

24-Jun-08 10:55

toxcct wrote:
but you still can compile an application targetting Win98 with VC++2005 or VC++2008

As I understand it, the Visual C/C++ 2008 runtime libraries no longer support Win98 though, so it won't run on Win98, even if it's targetted for Win98. Is this not the case ?

See http://forums.msdn.microsoft.com/en-US/vcgeneral/thread/d651fdb9-5e51-44eb-b518-3f481bfcf0c5/[^]

Re: Using VC++ 2008 compiler with VC++ 2005, but keep compatibility with Win98 ?

JudyL_MD24-Jun-08 10:39

JudyL_MD

24-Jun-08 10:39

Just use your 2008 and set the _WIN32_WINNT and WINVER variables to indicate that you want to target Win98 (0x0410)

Judy

Re: Using VC++ 2008 compiler with VC++ 2005, but keep compatibility with Win98 ?

Defenestration24-Jun-08 10:56

Defenestration

24-Jun-08 10:56

This won't work because the Visual C/C++ runtime library doesn't support Win98.

See http://forums.msdn.microsoft.com/en-US/vcgeneral/thread/d651fdb9-5e51-44eb-b518-3f481bfcf0c5/[^]

Re: Using VC++ 2008 compiler with VC++ 2005, but keep compatibility with Win98 ?

JudyL_MD25-Jun-08 2:03

JudyL_MD

25-Jun-08 2:03

Didn't notice that change for 2008. Sorry Blush | :O

Re: Using VC++ 2008 compiler with VC++ 2005, but keep compatibility with Win98 ?

Joe Woodbury24-Jun-08 11:07

Joe Woodbury

24-Jun-08 11:07

Be aware that the smaller code in VS 2008 is probably due to the NOWIN98 linker setting being automatic. In VS 2005 you can set this in the linker optimization properties. Your app will run slightly slower on Windows 98 as a result, but it will run.

Anyone who thinks he has a better idea of what's good for people than people do is a swine.
- P.J. O'Rourke

Possible solution to getting VC++ 2008 compiled apps to run on Win98...

Defenestration24-Jun-08 12:24

Defenestration

24-Jun-08 12:24

I haven't tested it the method, which is to manually change the value of "MajorOperatingSystemVersion" in the PE header, but the original author had luck getting his app to run on NT 4. You may also have to manually calculate the "Checksum" value and change that as well:

http://groups.google.com/group/Visual-Studio-NET-2005/browse_thread/thread/4fa74dafe3eb6ef5/3aaeafa3b6338ea7[^]

resource.h corruption

Like2Byte24-Jun-08 4:01

Like2Byte

24-Jun-08 4:01

Hi, In the past I've used a tool that analyzes a visual studio project's resource.h/rc files to ensure that they are not corrupted. (IE: No two resources share the same the ID.)

Does anyone else know of this tool? I forgot its name.

Thanks!

Found it on Code Project!

Like2Byte24-Jun-08 4:50

Like2Byte

24-Jun-08 4:50

http://www.codeproject.com/KB/macros/resorg.aspx[^]

MDI child windows in the task bar

Sylv3324-Jun-08 3:51

Sylv33

24-Jun-08 3:51

Hello,

Can anyone please tell me how to add my MDI child windows to the task bar so that when a user has multiple documents open they all appear in the task bar like in Word or Excel. I've tried setting the WS_EX_APPWINDOW style of my CMDIChildWnd derived classes but this doesn't seem to work.

Thanks!

Sylv

Re: MDI child windows in the task bar

_S_R_M_24-Jun-08 4:15

_S_R_M_

24-Jun-08 4:15

What you are looking for is an MSDI model instead of an MDI.

http://www.mimec.org/articles/mfc/msdi[^]

HTH
SM

0xC000001D "Fatal Application Error" ????

Trupti Mehta24-Jun-08 2:50

Trupti Mehta

24-Jun-08 2:50

Hello,

In eVC++ with WinCE5 on ARMV4I, the application is developed.
In my Property Sheet, in a page, on a button click the program executes the following code.

void CPPage1::GetData() {

	bool result = true;

	// CONVERT STRING TO INT
	CString csValue;
	GetDlgItem(IDC_OpNo_EDIT)->GetWindowText( csValue );
	m_opNo = atoi((char*)(LPCTSTR)csValue);

	csValue.Format(_T("%d"), m_opNo);
	AfxMessageBox(csValue);

	// Search operator no
	OperatorDetails od;
	od = g_db->GetOperDetails(m_opNo);

	CString s(_T("Map Count = "));
	s.Format(_T("%s %d \n %s %s"), s, g_db->GetOperMapCount(), _T("Page1::Got OD"), od.GetOperName());
	AfxMessageBox(s);

	if (od.GetOperatorNo() == 0 && od.GetOperName() == "") {
		AfxMessageBox(_T("Operator No Not found. Check Out!"),MB_ICONWARNING);
		result = false;
	} else if (od.GetOperName() == "") {
		AfxMessageBox(_T("Error Reading Data!"),MB_ICONWARNING);
		result = false;
	}else {
		CString nm = od.GetOperName();
		m_name = nm;
		GetDlgItem(IDC_NAME_LABEL)->SetWindowText(nm);
		AfxMessageBox(nm);
		EnableConfirm(true);
	} 

	if (result == false) {
		m_opNo = 0;
		GetDlgItem(IDC_OpNo_EDIT)->SetWindowText(_T(""));
		GetDlgItem(IDC_OpNo_EDIT)->SetFocus();
	}
	return;
}

g_db is an extern variable pointer to an object. I don't get any compiler/liner etc error or warnings. OnApply is called, everything is executed & then I get "Fatal Application Error" window saying application has performed an illegal operation & will be shut down. If problem continues contact vendor. Exception: 0xC000001D Address: 0050328.

If I avoid the above code, then I don't get this exception. Since it is a WincE with eVC application, I can't debug more to know where & what excatly the error line is. Can anyone help me know, what is illegal in the above code which happens to raise this exception.

Thanks

Terry

Re: 0xC000001D "Fatal Application Error" ????

Rajesh R Subramanian24-Jun-08 3:15

Rajesh R Subramanian

24-Jun-08 3:15

Trupti Mehta wrote:
Since it is a WincE with eVC application, I can't debug more to know where & what excatly the error line is.

No, I don't quite get it. Can't you use ActiveSync and debug the application straight from your IDE? You could as well use simple message boxes or a log file to analyze at what point the application terminates.

Nobody can give you wiser advice than yourself. - Cicero
.·´¯`·->Rajesh<-·´¯`·.
Codeproject.com: Visual C++ MVP

Re: 0xC000001D "Fatal Application Error" ????

Trupti Mehta25-Jun-08 23:08

Trupti Mehta

25-Jun-08 23:08

Rajesh, I use eVC++ & run the application via ActieSync. But I believe that I cannot debug in this scenario. Like On Abort/Retry/Ignore, press Retry & the debugger will come on the error line. No that's not possible.

What all AfxMessageBox, you see all are for debugging purpose only mainly.

Thanks

Terry

Re: 0xC000001D "Fatal Application Error" ????

David Crow24-Jun-08 3:17

David Crow

24-Jun-08 3:17

Trupti Mehta wrote:
...then I get "Fatal Application Error" window saying application has performed an illegal operation & will be shut down.

Before or after the calls to AfxMessageBox()?

"Love people and use things, not love things and use people." - Unknown

"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne

Re: 0xC000001D "Fatal Application Error" ????

Trupti Mehta25-Jun-08 23:18

Trupti Mehta

25-Jun-08 23:18

<pre>
BOOL CPPage1::OnApply()
{
// TODO: Add your specialized code here and/or call the base class
AfxMessageBox(_T("CPPage1:: OnApply\n"));

g_pView->SendMessage(WM_USERAPPLY);
return TRUE; //CPropertyPage::OnApply();
}

LRESULT CMC_AppView::OnUserApply(WPARAM wParam, LPARAM lParam)
{
TRACE(_T("VIEW::OnUserApply - wParam %x\n"), wParam);
CString t("Operator No = ");
AfxMessageBox(t); // m_sheet.m_page1.m_opNo);
// m_sheet.SetAttributes();
m_sheet.EndDialog(IDOK);
return 0;
}</pre>

OnApply calls the OnUserApply. I get the "Operator No = " AfxMessage & then the fatal error comes.

Thanks

Terry

Re: 0xC000001D "Fatal Application Error" ????

David Crow26-Jun-08 3:36

David Crow

26-Jun-08 3:36

Trupti Mehta wrote:
AfxMessageBox(t);
m_sheet.EndDialog(IDOK);

What happens if you remove either of these two statements?

"Love people and use things, not love things and use people." - Unknown

"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne

Re: 0xC000001D "Fatal Application Error" ????

Trupti Mehta26-Jun-08 5:54

Trupti Mehta

26-Jun-08 5:54

Afx.. was from first. Error is coming from the code attached in first message & in the mean while had also added EndDialog. Will try removing EndDialog & check out next week.
On research I have known that this exception stands if soething is not closed properly. Do you see any other possibility in the attached code or eVC has any internal problem accessing an more than 1 external object which does all database related activitlies. But the methods used here just does retriving objects from map which has all records read from the file.

Thanks

Terry

Re: 0xC000001D "Fatal Application Error" ????

krmed24-Jun-08 3:44

krmed

24-Jun-08 3:44

I believe WinCE5 uses Unicode, and you have MOST of your code set for that (by using the _T macro).

However, this line

Trupti Mehta wrote:
m_opNo = atoi((char*)(LPCTSTR)csValue);

is not Unicode. Use

m_opNo = _tstoi((LPCSTSTR)csValue);

instead.

Hope that helps.

Karl - WK5M
PP-ASEL-IA (N43CS)
PGP Key: 0xDB02E193
PGP Key Fingerprint: 8F06 5A2E 2735 892B 821C 871A 0411 94EA DB02 E193

Re: 0xC000001D "Fatal Application Error" ????

Stephen Hewitt24-Jun-08 15:51

Stephen Hewitt

24-Jun-08 15:51

krmed wrote:
is not Unicode. Use

m_opNo = _tstoi((LPCSTSTR)csValue);

Or even better use no explicit cast:

m_opNo = _tstoi(csValue);

Steve

Bitmap Deconstruction (AKA: How to get pixel values from a file)

Michael Fritzius24-Jun-08 2:12

Michael Fritzius

24-Jun-08 2:12

Hi all,

I'm looking for some snippets of code that show me how to get the individual pixel colors out of a bitmap or other graphic file format. So if it is given a file, it would find out what color each pixel is, and maybe output it to a text file or something.

Any ideas? This is for a really cool project for little kids, and I'm excited to get started. Any guidance would be great.

Thanks for your time,
Michael Fritzius

Re: Bitmap Deconstruction (AKA: How to get pixel values from a file)

Nibu babu thomas24-Jun-08 2:20

Nibu babu thomas

24-Jun-08 2:20

matrix2681 wrote:
his is for a really cool project for little kids, and I'm excited to get started. Any guidance would be great.

Using GetPixel[^] is an option. Also you can use ::LoadImage to load a bitmap from file.

Nibu babu thomas
Microsoft MVP for VC++

Code must be written to be read, not by the compiler, but by another human being.

Programming Blog: http://nibuthomas.wordpress.com

Re: Bitmap Deconstruction (AKA: How to get pixel values from a file)

SandipG 24-Jun-08 2:46

SandipG

24-Jun-08 2:46

You can use GDI+ for loading the images and use methods LockBits(..)/UnlockBits(..) to get access to pixel data. there are loads of application on CP to help you out few are
http://www.codeproject.com/KB/GDI-plus/gdi__and_mfc.aspx[^]
http://www.codeproject.com/KB/GDI-plus/cgdiplusbitmap.aspx[^]
http://www.codeproject.com/KB/cpp/GDI_.aspx[^]

Regards,
Sandip.

Re: Bitmap Deconstruction (AKA: How to get pixel values from a file)

Hamid_RT25-Jun-08 23:37

Hamid_RT

25-Jun-08 23:37

CImage class has good functions for work with images.

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.