|
Dear All,
I have removed system user rights in windows xp and now i am unable to log in and even i can't go into windows xp. please help me out . how to add rights to this.
waseem
|
|
|
|
|
waseem khan wrote: emoved system user rights in windows xp and now i am unable to log in
Are you surprised?
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Not sure if this is the best forum, but it is relating to an operating system not booting.
I've now seen for the second time a computer where the partition table on the boot disk has been lost, meaning that no partitions exist on the disk.
In both instances, I've managed to recreate the partition with a Linux based CD, which recovered all the data, and then fixed the master boot record of the boot device and all was fine.
But in both instances, I haven't been able to find the root cause of the problem. I'm not aware of any programs that can do this, or anything a user can do to cause this, and I think it's happening at too low a level and too specific to be a virus.
Any thoughts, ideas, suggestions or possible answers would great!!
------------------------
Luke Lovegrove
------------------------
|
|
|
|
|
If you are running windows xp, you could boot with the installation disk, go to the repair console, and use chkdsk to see see if your hard drive has any errors. If you're not running windows xp, then maybe your hard drive is close to burning out?
Code pre-built is code that you don't have to build later.
|
|
|
|
|
In this case it was a Small Business Server 2003, and the OEM disk didn't include the recovery console, which is something I'll be taking back to the OEM vendor. I did get my hands on a retail edition though, which does include the recovery console which fixed the master boot record.
It actually happened to my own system quite some time ago as well, and the hard drives in that system are still running without issue, so I'm not sure it is the hard drive burning out either.
------------------------
Luke Lovegrove
------------------------
|
|
|
|
|
Not sure what it could be then. I've never had that problem with any of my hard drives before, and I've had them for about 5 to 6 years so far. Glad to try to help you, though.
Code pre-built is code that you don't have to build later.
|
|
|
|
|
Could you post more detailed information about that? How many users are using the OS? How the issue manifested (blue-screen, reboot or something). What kind of applications have you installed?
|
|
|
|
|
The first one a while ago was simply a single system, that had a heap of programs installed under Win XP. It was fine the night before, and when it went to startup the following day, the operating system not found message appeared.
The second time around, and the most recent, was an SBS 2003 R2 box, which was only less than a month old, and was shut down in order to install a UPS. Once connected to the UPS, the machine was restarted, and the operating system not found message appeared. In this instance, it only acts as a server, no user at the console, has the standard SBS stuff installed - SQL, Exchange etc., and not much, if anything else is installed, but has not more than 15 or 20 users accessing it.
Therefore, about the only commonality I've been able to see is that both have occurred on a shutdown, but I don't know if the partition table was cleared before shutdown, during shutdown or on the restart.
------------------------
Luke Lovegrove
------------------------
|
|
|
|
|
I guess you're using NTFS. In your case I would try to isolate the issue somehow. For example try to disable the swap file, disk caching, etc. It's nasty if you don't know how to reproduce the issue. Maybe you could experiment with a cloned partition on another machine. Or the disk in another machine. I would like to know the causes of this, so if you find out anything please post it.
|
|
|
|
|
can any one please tell how many languages are supported by visual studio 2008 and what are they and how many classes it supports. thanks in well advance
|
|
|
|
|
Google broken where you live ?
.NET supports an infinite number of classes, they are being written all the time.
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
42 and counting.
|
|
|
|
|
Hi, My computer is running windows server 2003. After I log on to windows, its display the message box Missing Hardware ID. Then the system is shut down immediately like no electricity. I don't know what is the cause of the problem. Can anyone give me any suggestion to solve this problem? Thank in advance
|
|
|
|
|
How to install the microsoft's Visual C++ Runtime 8.0 in XPE? Microsoft has been published vcredist_x86.exe for installing the runtime, but in my XPE image there is no support for the Windows installer, and i have some difficulties to adding one.
so i am looking for an alternative way to install the VC8 runtime in XPE. like copying the files and manifests and making the registry entries, anybody here faced the same issue???
Any help will be appreciated.
Never Work Hard! - Work Smart!!!
www.indianITforum.com
|
|
|
|
|
I tried installing Fedora 8 on a pentium III machine but was never successful. Can somebody tell me what might have cause this problem. Thanks in advance.
|
|
|
|
|
Kofi Ambrose wrote: I tried installing Fedora 8 on a pentium III machine but was never successful. Can somebody tell me what might have cause this problem.
No.
You didn't give any information that could help in solving the problem. Read this document: http://www.catb.org/~esr/faqs/smart-questions.html[^]
|
|
|
|
|
The problem is that, the installation process would start alright but gets stuck on the way (about half way through),that is, in the course of copying files, and eventually fails.
|
|
|
|
|
Have you set the memory requirements as per the instructions on the fedora manual? The swap, boot requirements, root...etc
---------------------------
Both optimists and pessimists are important in technology. The optimist invented the aeroplane; the pessimist invented the parachute.
Regards,
Hesbon Ongira
Nairobi, Kenya.
|
|
|
|
|
Kofi Ambrose wrote: Can somebody tell me what might have cause this problem
How can we with the crap information you gave? No particular error message or anything like that, leaves it to being anyone's guess.
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Hi all,
I have purchased a new Desktop with 320GB SATA 3.0 Gb/s Hard Drive with Native Command Queuing. I would like to know can i install window2000 into this desktop?
regards
cocoonwls
|
|
|
|
|
Why wouldn't you be able to? It's just a hard drive. Otherwise I'm not sure what you are asking...
|
|
|
|
|
Hi,
If your question is related with installation of Windows 2000 only then you can go ahead and install it on SATA Hard Disk. There would not be an issue with that.
Hope this help
Regards,
John Adams
ComponentOne LLC
|
|
|
|
|
If the system is in ATA-compatible mode the SATA controller and disk look like regular IDE disks to the BIOS and to Windows. There are no problems with this.
However, to make use of features like Native Command Queueing, the new Advanced Controller Host Interface (AHCI) mode is required. If this mode is enabled, Windows needs a driver in order to be able to read the disk. (This is also true of SCSI disks and controllers, RAID controllers and any additional IDE controllers that aren't at the standard locations.) Also, if booting from that disk, it requires a copy of the driver named ntbootdd.sys in the same location as ntldr and boot.ini (typically the root of drive C). If the right driver to access the hard disk isn't available and the built-in support doesn't work, Windows will blue-screen with an INACCESSIBLE_BOOT_DEVICE code.
Windows 2000 and XP require a floppy disk to be made available at setup time to provide additional storage drivers. You have to press a key when prompted (F6, from memory) to tell Setup that you want to load additional drivers. Some new systems - which generally don't come with floppy drives - can pretend that a USB memory key is a floppy drive for this purpose.
I'd stick with ATA-compatible mode unless you have good reason to select AHCI mode. AHCI may not even be an option in your BIOS setup - my Dell system doesn't allow it to be selected.
DoEvents: Generating unexpected recursion since 1991
|
|
|
|
|
Hi all,
Thanks for reply to my question.Thanks.But here i have another question after i install win2000.Actually the desktop which i purchased is come together with winXP and driver.So, are the driver will compatible with the win2000? Because i am heard from my freind said that, some driver are not support win2000.
Any help are welcome.Thank you
Note: My computer is Dell vostro desktop.
regards
cocoonwls
|
|
|
|
|
You could do a check on the Dell site to see if there are drivers for your specific model.
|
|
|
|