|
If I understood well, you want say that when you run application, there is a LinkLabel selected by default(only one and every time the same).
If I understood correctly, this is caused because the LinkLabel that appear selected have the lower value of TabIndex property, automatically assigned to all controls you designed on the form (in the same order you designed them on the form, starting from value 0).
Probably you created firstly LinkLabels and after other controls.
If you don't like it, the only way I know to correct it, is to manually modify the TabIndex assigned to controls (assigning TabIndex = 0 to another control that is not a LinkLabel).
For example to a TextBox or a Button.
You can also create a not visible and not enabled control and assign to it TabIndex = 0.
This work in the development environment of course.
May be this can be done also programmatically.
I hope this help you.
|
|
|
|
|
Hi all,
I am developing an application for BlackBerry that will send and receive an SMS. I am able to send an SMS through the application. I want to do the following things with the application:
Grab an SMS which has a fixed five characters say "ABCDE" at the beginning and one character say "A" at the end. For extracting the beginning and end characters we can use CharAt() and SubString(), but before we extract it, we need to grab the SMS and store it in some variable.
Invoke an application when the SMS comes in with the above criteria.
Do not let the SMS go into the SMS inbox (phone's inbox).
Navigate from one screen to another with the value from the previous screen.(i.e assgning some global variables and using them)
I am using BlackBery JDE 4.5
Regards
Parasmani Swamy
|
|
|
|
|
I also need same feature to work on my application. Did u find any solution to the above requirement . If yes then please reply me or if you can give me your email id then also it will be fine.
Please reply soon . I need help on this ....
Thanks!
Bhushan
|
|
|
|
|
Dear .Net Veterans,
I have been associated with .Net Technologies close to 4 years now. I had recently quit my job as an programmer and have taken up my Masters in Robotics. Its time for my first project and I want to completly utilize my 4 years of rewarding programing experience in my Masters project. I have a list of questions, so do please spare your valuable time and respond to my queries.
As a Masters project, we have planned to create a robot which can follow the route traced on a touch sensitive screen. I have unfortunately dont have prior experience on projects involving Hardware/Software interface.
We have an Palmtop on which I can have .Net framework installed so that the route to be followed by the robot can be traced on the touch pad and I need to create an application which can fetch these co-ordinates. Its pretty simple I guess.
Need some pointers on where to get started in creating such applications. Any existing projects will be very helpful.
Any other considerations which I need to make before getting started.
Once I complete this step, I will look forward to transmit the signal via the built-in Wi-Fi adapter.
--------------------------------------------------------------------------------
--Amrish
|
|
|
|
|
Hi everyone!
I'm writing an application on .NET CF. My app must protect some data files, which are cannot be changed or removed by user. But I don't know how to do this.
Another question. My app is protected by password. In case of user has forgotten his password, he can recover it by ordering the program to send an email (contain his password) to his email address. My problem is, this email is not secure, and anybody can read it, and then access to sensitive information stored in the program. I've not had any idea to solve this problem yet.
I'm very happy if you can give me some suggestions/solutions for my problems. Thank you!
|
|
|
|
|
You have absolutly no control over data that leaves the boundries of your device. If the program sends out an e-mail that e-mail has left the boundries of the device into the unsecure world. The data will be accessible unless you encrypt it, but if you encrypt the data then the user cannot read it. If you need to keep the data secure don't use e-mail. Not having password recovery at all would be more secure.
As for securing information on the device itself you can use encryption and use the device's ID as part of the encryption key. That won't stop a clever hacker from decrypting it.
|
|
|
|
|
Hi all,
I have a PictureBox1 (240 *180) on the form. I want it display me (in original size), the image that I select from a ListView1 control.
All work fine, but I desire that if original image-size exceed 240*180, it must be resized to such size to be displayed enterely in PictureBox1 (manteining the image sides-ratio).
Is there a simple way (in C.F.2 - V.B. code) to obtain it?
Thanks
modified on Sunday, October 12, 2008 1:05 PM
|
|
|
|
|
Hi,
I'm thinking about developing applications for my Nokia E90, but I don't know where to start. Can anyone guide me?
Thanks!
Rafferty
|
|
|
|
|
If you already have some programming experience, the only point from which you can start is to write in the search box of google "How to develop Symbian application", and read, read, read.... and learn, learn, learn....
After you can post some question here...
|
|
|
|
|
haha but is there any site you can recommend? For starters, what language is it in? I did encounter 1 site where I found all the apps in C++, I wonder if I can develop an app in symbian using .Net...
Rafferty
|
|
|
|
|
For starters may be is more easy Visual Basic, but C++ is without doubts the better language for performance of applications.
I started with VB and continue with it, but often I desired to know C++.
Give a look here:
http://www.windowsfordevices.com/news/NS5913080420.html
and here:
http://www.allaboutsymbian.com/news/item/6256_NET_on_S60_3rd_Edition_now_a_r.php
May be there are good news for Symbian world.
I understood that now is possible to run Windows Smart Devices application on Symbian platforms, but I not read entire articles.
|
|
|
|
|
Hi Hurricane,
Thanks for the link! It got me excited. I really hope that it'll support E90 soon... I love developing on the .Net framework, so much that it might "force" me to get a smart phone instead hahaha
Rafferty
|
|
|
|
|
My opinion is that is a good idea to have a Windows Mobile based Smart Phone for who want to develop or use some particular application.
|
|
|
|
|
Maybe you're right, but I like the widescreen of the e90 because I use spreadsheets a lot. For the current smartphones, one would have to set the screen to landscape mode and zoom out to be able to see many columns in one screen.
Oh well... I guess I'll just wait for .net mono to support e90 phones haha
Thanks again.
Rafferty
|
|
|
|
|
Create a drawing program with the following features:
a. The user has a bounded drawing area (i.e., the user is not drawing directly on the form).
b. The user has three "tools" with which to draw: a line drawing tool, a box drawing tool, and a freehand drawer.
When the line tool is selected, the user clicks on the drawing area and, holding the button down, moves the mouse.
When the button is released, a line is drawn between the point where the button was pressed and the point where it was released. (For all of the drawing tools, you will want to write code for the MouseDown and MouseUp events of your drawing area.)
The box drawing tool works in the same manner as the line drawer, except the two points are considered the corners of a box to be drawn. When the freehand tool is selected, clicking in the drawing area places a point where the mouse pointer is.
As long as the mouse button is held down, the user can move the mouse and lines will be drawn from point to point.
The effect will be that the user is drawing directly with the mouse pointer (like the “Pencil” in the Windows Paint program).
I dont know really how to start, how to include line, rentangle and freedraw control on the form.
Thanks in advance
ZAfar
|
|
|
|
|
Hi all,
After a PictureBox has displayed an image, how programmatically to clean it in Compact Framework VB?
In other words, I need the same effect as to clean a TextBox I use:
TextBox.Text = ""
I want PictureBox displays no image.
Thanks
modified on Wednesday, October 8, 2008 2:59 PM
|
|
|
|
|
yourPictureBox.Image = Nothing
|
|
|
|
|
Thanks Adam,
I received your reply in "real time", just while I was working around...
Your line works!
Ignazio
|
|
|
|
|
Hi, I was wondering if someone here could point me to some resources for accomplishing what I would think would be a fairly simple programming task if I was familiar with the right environments.
I am an experienced Actionscript 2/3 developer myself, so I figure a transition to something like the .NET compact framework in C# should be manageable.
I want to be able to play back MP3s on my phone, but have a screen that pulses with the tempo of the music. Perhaps it would be as simple as taking the tempo information from ID3 tags I could assign and then setting up a loop timer with the corresponding interval. I'm guessing that using a few classes in C# would be the quickest route to success, but I don't know if I would be sacrificing any timing precision by going that route. In any case, I was looking at MSDN to try and get started, but the link to the compact framework tutorials is broken.
Can anyone send me in the right direction? Thanks in advance.
|
|
|
|
|
the tempo information in an mp3 tag cannot be trusted. songs change tempo and the tempo information would have limited precision. the most precist results could be acquired with a fourier transform, but that is going to be computationally expensive.
|
|
|
|
|
Hi
i am a beginner programmer in windows mobile.
i know C# average.I want to write a simple program in Visual studio 2005 (C#), which produce a form contained 3 levels(name, sal,designation) and 1 submit button ,whenever I m submitting this form the data will be save anywhere in my mobile....
Please help me..
|
|
|
|
|
|
Hi
I want to create button at run time in win mobile using vb.net 2005.
and i want to create event also at run time.
Please suggest. i write the following code...
dim btn as button
For i As Integer = 0 To 5
btn = New Button
btn.Text = sAppointmentTypes(i)
btn.Tag = sAppointmentTypesIds(i)
btn.Height = Label1.Height
btn.Left = Label1.Left
btn.Width = Label1.Width
btn.Top = Label1.Top + (Label1.Height * i + 1) + 50
'AddHandler btn.Click, AddressOf btn.Click
AddHandler btn.Click, AddressOf Me.ClickButton
Me.Controls.Add(btn)
Next
Private Sub ClickButton(ByVal sender As System.Object, ByVal e As System.EventArgs)
msgbox sender.text
End Sub
it shows the error in sender.text.
Please suggest how i do this.
Thanx
~Khatri Mitesh
khatrimitesh@hotmail.com
Bikaner (Rajasthan)
INDIA
|
|
|
|
|
Private Sub ClickButotn(ByVal sender as Object, Byval e as EventArgs)
Dim b as New Button = DirectCast(sender,Button)
messagebox.show(b.text)
End Sub
Hope this helps.
|
|
|
|
|
Hii
I want to change the back color of selected dated in month calender.
Like i have appointments on following dates 1-10-2008,5-10-2008,10-10-2008,15-10-2008
so i want to show these date back color is green.
How can i do this.
Please suggest.
Thanx
Mitesh Khatri
~Khatri Mitesh
khatrimitesh@hotmail.com
Bikaner (Rajasthan)
INDIA
|
|
|
|