|
I am currently writing a custom toolbox window for Visual Studio 2008, using the SDK. When the user drags from the list, I start a drag drop operation using ToolboxItem as the drag data.
ToolboxItem tbi = new ToolboxItem(myControlType);
IToolboxService serviceToolBox = (IToolboxService)GetService( typeof(IToolboxService));
object tbiSerialized = serviceToolBox.SerializeToolboxItem(tbi);
this.DoDragDrop(tbiSerialized, DragDropEffects.Copy);
When they drop the ToolBoxItem, I use the 'ToolboxItem.ComponentsCreated' event to write some extra setup code on the control
void dropToolBoxItem_ComponentsCreated(object sender, ToolboxComponentsCreatedEventArgs e)
{
// write custom control config code here
}
However, I'm finding that I sometimes want control over the ToolboxItem control type, based on UI conditions during the drag. For example, I may want to create a different control on the designer if the user holds down the shift key. Sometimes I want to block the drop completely. Unfortunately, I don't see a way to change the ToolboxItem after I start the drag. It seems like the 'ToolboxItem.ComponentsCreating' event was meant for this kind of intervention, but I can't change the control type when the 'ToolboxItem.ComponentType' property is read only.
I've tried a few hacks (like deleting the control after drop and re-creating the new control type), but none of it has worked out very well. Anyone have any ideas?
Thanks,
Aaron
|
|
|
|
|
Hi. Subject pretty much says it all.
My C# application spends a lot of time consuming data from a web service, and I want to provide a mechanism which allows me
to count the total number of bytes entering and leaving the application over time.
Have tried a few google searches, but they're yet to turn up anything useful.
-Nick
|
|
|
|
|
I have CR template and Desktop Apps that access the CRViewer and convert them into PDF. The problem is that once the application installed on another PC without VS2005 installed the Program corrupted and would not run.
I have add references for all Crystal dlls.
'Export Crystal Report to PDF
Dim cryRpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument
cryRpt.Load(Application.StartupPath + "\Rpt\_Plant.rpt")
CrystalReportViewer1.ReportSource = cryRpt
CrystalReportViewer1.Refresh()
Dim CrExportOptions As CrystalDecisions.Shared.ExportOptions
Dim CrDiskFileDestinationOptions As New CrystalDecisions.Shared.DiskFileDestinationOptions
Dim CrFormatTypeOptions As New CrystalDecisions.Shared.PdfRtfWordFormatOptions
Dim ExportDestinationType As New CrystalDecisions.Shared.ExportDestinationType
Dim ExportFormatType As New CrystalDecisions.Shared.ExportFormatType
CrDiskFileDestinationOptions.DiskFileName = dtSvr.Rows(0).Item("Outstring") + "Daily Analysts\" + NowDate + ".pdf"
CrExportOptions = cryRpt.ExportOptions
With CrExportOptions
.ExportDestinationType = ExportDestinationType.DiskFile
.ExportFormatType = ExportFormatType.PortableDocFormat
.DestinationOptions = CrDiskFileDestinationOptions
.FormatOptions = CrFormatTypeOptions
End With
cryRpt.Export()
cryRpt.Close()
CrystalReportViewer1.DataBindings.Clear()
|
|
|
|
|
I have intergrated with Active Directory But i wana Give access to Groups in Active Directory...
I dont want HR group to access my page Only IT and other Groups in AD can access...
Can some one help and send me the code...
Login.aspx.cs
using System;
using System.Collections;
using System.Configuration;
using System.Data;
using System.Linq;
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.HtmlControls;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Xml.Linq;
using System.DirectoryServices;
public partial class Login : System.Web.UI.Page
{
public string myEmployeeID;
protected void Page_Load(object sender, EventArgs e)
{
}
private bool Authenticate(string domain, string txtusername, string txtpassword)
{
bool authentic = false;
try
{
DirectoryEntry entry = new DirectoryEntry("LDAP://" + domain,
txtusername, txtpassword);
object nativeObject = entry.NativeObject;
authentic = true;
}
catch (DirectoryServicesCOMException) { }
return authentic;
}
protected void Button1_Click(object sender, EventArgs e)
{
string adPath = ConfigurationSettings.AppSettings["strADPathVar"].ToString(); ;
//Authenticate adAuth = new Authenticate(adPath);
try
{
string strDomain = ConfigurationSettings.AppSettings["strdomainVar"].ToString();
if (true == Authenticate(strDomain, txtusername.Text, txtpassword.Text))
{
string groups = "";
FormsAuthenticationTicket authTicket = new FormsAuthenticationTicket(1, // version
txtusername.Text,
DateTime.Now,
DateTime.Now.AddMinutes(60),
false, groups);
// Now encrypt the ticket.
string encryptedTicket = FormsAuthentication.Encrypt(authTicket);
// Redirect the user to the originally requested page
Response.Redirect(FormsAuthentication.GetRedirectUrl(txtusername.Text, false));
}
else
{
lblError.Text = "Error: Unknown user ID or bad password.";
}
}
catch (Exception ex)
{
lblError.Text = ex.Message;
}
}
sheeba
|
|
|
|
|
Wrong board it appears...
Try ASP.NET[^]
Mark Salsbery
Microsoft MVP - Visual C++
|
|
|
|
|
Hi ,
I am developing mobile web application. I want to make readonly selectionlist item in ASP.net. How to make it?
Thanks!!
|
|
|
|
|
Wrong board it appears...
Try ASP.NET[^]
Mark Salsbery
Microsoft MVP - Visual C++
|
|
|
|
|
I have a scenario where I have an application that allows a user to open mulitple documents on different tabs within the application.
If the application is already running and the user opens a file associated with my application from Windows Explorer, how can I get the document to open in the instance of my application that is already executing as opposed to opening a new instance of the application?
I have seen posts that check whether or not a process / application is already running. In the examples I have seen, if the application is already running a messagebox is just displayed indicating as such. However, in my case, I need to assign the document to the executing instance of the application.
Any help would be appreciated?
|
|
|
|
|
Hi,
don't post the same message in multiple forums, pick the most appropriate forum and stick to it.
Luc Pattyn [Forum Guidelines] [My Articles]
- before you ask a question here, search CodeProject, then Google
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get
- use the code block button (PRE tags) to preserve formatting when showing multi-line code snippets
|
|
|
|
|
Hi
Can anybody recommend me a good obfuscation tool for .net code.
Any advice will be appreciated,
Uros
|
|
|
|
|
Dotfuscator Community Edition, gets installed with Visual Studio. You can find it in the start-menu under the Visual Studio Tools, and it gets installed under
C:\Program Files\Microsoft Visual Studio 9.0\Application\PreEmptive Solutions\Dotfuscator Community Edition\dotfuscator.exe"
No experience with other obfuscators, sorry.
I are troll
|
|
|
|
|
I didn't know that. Thanks for your quick reply!
Uros
|
|
|
|
|
You're welcome
I are troll
|
|
|
|
|
Xenocode is good but not cheap.
|
|
|
|
|
I like EZIRIZ .NET Reactor.
Great Product, Great Price.
|
|
|
|
|
i developing a windows application with C# and that application need database . so i used sql server2005 for that. It is purely for a stand alone system. so that i cant deploydatabase online.
so how to add sql database to deploying file and who to maintain conntection string , and how back up the datafile when he require.
1. is sql express required in client system?
2. If not how to deploy all data in my data base including structure?
3. and awhat is procedure for entaire deployment of application with sql database?
Thanks in advance.
|
|
|
|
|
You can't redistribute SQL Server 2005 per application without the associated license costs.
It sounds like you want an embedded database that you can use from .NET. Why don't you look at System.Data.SQLite[^], the excellent C-based embedded relational database with .NET bindings. The authors have placed it in the public domain which will allow you to redistribute it willy-nilly.
Best of all, you can "pre-load" the database and distribute the data with your application!
"we must lose precision to make significant statements about complex systems."
-deKorvin on uncertainty
|
|
|
|
|
I had some free time between projects, so I thought it would be a good time to install this on my development box, and see what needed fixed.
The install went great, no problems, I installed the "family" update that came out not long ago, also went great, and turned on Visual studio.
I opened up my current project (website) and built it. It failed on "using System.Web.Extensions" "are you missing an assembly reference?"
I removed and added the reference several times, no effect.
I repaired .net and visual studio, no effect.
I found a blog that talked about uninstalling the .dll from the GAC and adding the pre-sp1 .dll to the project directly, still no effect.
Has anyone seen this? if so,is there a fix or workaround that I can do, so sp1 works?
If not, is there a safe, easy way to uninstall the sp1's?
Thank you
|
|
|
|
|
I'm having a similar issue and was wondering how to fix this also.
|
|
|
|
|
Sorry, my fix was to uninstall vs 2008 sp1 and .net 3.5 sp1.
|
|
|
|
|
Hey, long time reader first time poster.
I am finally at a point in my software development to start worrying about business objects and a great business layer. My projects are getting larger and more complex by the day and i am finding that my simple DTO objects are not going to be able to cut it and they will have to just be on my dumb objects. So what i am getting at is what interfaces i should consider when i start building my new objects?
I have done IEditable and really like that and am sort of curious on what other interfaces i should build into my data bound objects. (INotifyPropertyChange, ITrackingChanges, etc..). I deal mainly on smartclients with a service (WCF) right now but will be moving a bit toward web based apps since that is what clients are asking for now and still utilize my services. (Hope that extra info helps you help me)
Any info appreciated peers,
Jordon
P.S. Also I will be creating my own typed lists to hold these objects and a business layer mapper to convert my DTOs to the smart business object. So any information on what has worked/not worked for you would be great or books that i should have on my shelf.
|
|
|
|
|
This is not exactly an easy question to answer in a forum post since designing good business objects goes FAR beyond which Interface you're going to implement. You might want to check out what Rocky Lhotka has to say about the subject here[^]. Seriously, entire books are dedicated to this subject...
|
|
|
|
|
|
i want to make a ivr project for college ,how can i do this by java pls help me, my deadline is 10 may declear by college. and i have not well knowledge about java im weak in programming
|
|
|
|
|
So, you're asking a question about how to write this project using Java, in a development forum that has nothing to do with Java??
You may want to find a Java-specific forum, and when you re-ask this question, you might want to spell out what you mean by "ivr".
|
|
|
|