|
Hi,
Read the following article[^], I think it will help.
Kind regards,
The only programmers that are better C# programmers, are those who look like this -> ![Green Alien | [Alien]](https://codeproject.freetls.fastly.net/script/Forums/Images/alien.gif) |
 Programm3r
My Blog: ^_^
|
|
|
|
|
Hey guys n gals
I am creating an app where there will be several 'steps' of which need to be completed before the final form is shown. Is there a way where we (I) could use one panel for each step and simply show and hide appropriate panels on the completion of a particular 'step', instead of creating a whole new form for each step?
I know how to do this but everytime I create more than one panel, the controls from one panel end up going onto the panel behind the top panel. I know a groupbox would work for this but they are ugly (atleast in this situation). I can't seem to find any info anywhere else that may suggest that there would be another way of doing this.
thank you,
jay
|
|
|
|
|
Create a UserControl for each step in the process and add/remove those from your main form.
|
|
|
|
|
 Yay! Thank you Jimmanuel!
jay
|
|
|
|
|
See below, Jimanuel's suggestion is flawed to say the least.
Panic, Chaos, Destruction.
My work here is done.
|
|
|
|
|
jt_23 wrote: Is there a way where we (I) could use one panel for each step and simply show and hide appropriate panels on the completion of a particular 'step', instead of creating a whole new form for each step?
This is the basic approach for a wizard form.
- each step is on a panel
- sitting forward/back incriments or decriment the panel to be shown.
If you place all the panels on a group control, you can have a nice and pretty method to show the correct one:
private void ShowPanel(Panel panel)
{
foreach (Control ctrl in groupBox1.Controls)
{
ctrl.Visible = (ctrl == panel);
}
}
Do not start adding and removing controls on the fly; the problems outweigh any possible benefit.
Panic, Chaos, Destruction.
My work here is done.
|
|
|
|
|
Thank you walliamnw your approach is alot easier ill try this one. thanks again!
jAy
|
|
|
|
|
If you go to the top of this page and enter wizard in the search box and change from messages to articles, you will find lots of examples to help you.
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
I've used sql command here is my code
string CommandText = "select * from par where Time between '" + textBox7.Text + "%' and '" + textBox13.Text + "%' and Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%'and Duration >= " + textBox10.Text + " ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
It has problem that if I haven't insert value to Time it will not show anything but
if I take the value to it I can run the search and It'll take the value to mydatagrid
|
|
|
|
|
What do you want it to do? ie. when no time or date is entered.
You don't have any validation here at all do you? That's a concern. They could type anything into those textboxes. Wrong input could throw an exception and malicious input could wreck your database. I'd consider parameterising your query rather than string building it.
Regards,
Rob Philpott.
|
|
|
|
|
I want to search it but if I didn't insert value in textBox7 or textBox13 it will not show anything( but I 've inserted data in another textbox)
string CommandText = "select * from par where Time between '" + textBox7.Text + "%' and '" + textBox13.Text + "%' and Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%'and Duration <= " + textBox10.Text + " ;";
but if i insert data into it it will show like this command
It's mean that every function is subset of between right ?????
|
|
|
|
|
That's what it's supposed to do.
I suggest using DateTimePickers rather than TextBoxes, and parameterize the query.
|
|
|
|
|
private void button4_Click(object sender, EventArgs e)
{
sql_con = new SQLiteConnection("Data Source= " + info + ".db;Version=3;New=False;Compress=True;");
sql_con.Open();
sql_cmd = sql_con.CreateCommand();
if ((radioButton1.Checked == true))
{
if (textBox10.Text != "")
{
if (textBox7.Text != "")
{
string CommandText = "select * from par where Time between '" + textBox7.Text + "%' and '" + textBox13.Text + "%' and Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%'and Duration >= " + textBox10.Text + " ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
else
{
string CommandText = "select * from par where Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%'and Duration >= " + textBox10.Text + " ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
}
else
{
if (textBox7.Text != "")
{
string CommandText = "select * from par where Time between '" + textBox7.Text + "%' and '" + textBox13.Text + "%' and Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%' ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
else
{
string CommandText = "select * from par where Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%' ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
}
}
else if ((radioButton2.Checked == true))
{
if (textBox10.Text != "")
{
if (textBox7.Text != "")
{
string CommandText = "select * from par where Time between '" + textBox7.Text + "%' and '" + textBox13.Text + "%' and Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%'and Duration <= " + textBox10.Text + " ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
else
{
string CommandText = "select * from par where Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%'and Duration <= " + textBox10.Text + " ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
}
else
{
if (textBox7.Text != "")
{
string CommandText = "select * from par where Time between '" + textBox7.Text + "%' and '" + textBox13.Text + "%' and Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%' ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
else
{
string CommandText = "select * from par where Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%' ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
}
}
else
{
if (textBox7.Text != "")
{
string CommandText = "select * from par where Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%' and Time between '" + textBox7.Text + "%' and '" + textBox13.Text + "%' ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
else
{
string CommandText = "select * from par where Date like '" + textBox6.Text + "%' and Linein like'" + textBox8.Text + "%' and Lineout like '" + textBox9.Text + "%' ;";
DB = new SQLiteDataAdapter(CommandText, sql_con);
DS.Reset();
DB.Fill(DS);
DT = DS.Tables[0];
dataGridView1.DataSource = DT;
int rowCount = ((DataTable)this.dataGridView1.DataSource).Rows.Count;
textBox12.Text = rowCount.ToString();
sql_con.Close();
MessageBox.Show("OK");
}
}
}
|
|
|
|
|
I want to develop a pdf printer. I can pass any type of document to the pdfprinter so that it will generate the PDF file.
i have used the Ghostscript 8.56 and my Operating System is :XP.
1.I can get the Postscript file (.ps)
2. Unable to convert to .pdf
I don't know where i did mistake, my code is as follows :
string command = "gswin32c.exe -q -dNOPAUSE -dBATCH - sDEVICE=pdfwrite -sOutputFile=" + path + " -fd:\\GSOUTPUT.PS";
Process pdfprocess = new Process();
StreamWriter write;
StreamReader read;
ProcessStartInfo info = new ProcessStartInfo("command");
info.WorkingDirectory = System.AppDomain.CurrentDomain.BaseDirectory;
info.CreateNoWindow = false;
info.UseShellExecute = false;
info.RedirectStandardInput = true;
info.RedirectStandardOutput = true;
pdfprocess.StartInfo = info;
pdfprocess.Start();
write = pdfprocess.StandardInput;
read = pdfprocess.StandardOutput;
write.AutoFlush = true;
write.WriteLine(command);
write.Close();
ret = read.ReadToEnd();
Pls help me to create pdf....
Thanks in Advance.
Regards
Doni
|
|
|
|
|
Hello all
I am using WebMethod and File.Move
But my problem is the file is being locked by the WebMethod and it cannot be moved again (I want to rename it, not move it)
The exception thrown is "The process cannot access the file because it is being used by a another process"
How do I solve this?
I probably googled for half an hour
Here is my code:
[WebMethod]
public void EditFile(string FilePath, string NewName, string OldName)
{
File.Move(FilePath + OldName, FilePath + NewName);
}
|
|
|
|
|
You cannot move or rename a file that is in use. You need to make sure whatever has the file open closes it first.
What do you mean when you say "locked by the WebMethod". Is it your own code that has the file open? You just need to make sure you close the file before you try and rename it. (Post your code that opens/reads the file)
Simon
|
|
|
|
|
Im using jQuery ajax method to call the webservice
$.ajax({
type: "POST",
url: "fileManager/WebService.asmx/EditFile",
contentType: "application/json; charset=utf-8",
dataType: "json",
data: "{'FilePath':'" + filePath + "', 'NewName':'" + newName.val() + "', 'OldName':'" + oldName.text() + "'}",
});
The file is used in a tag
No where else, hope you understand.
It only works the first time I try it, the next it throws an error
|
|
|
|
|
Casper Hansen wrote: The file is used in a tag
Then you can't rename it. If a file is being used somewhere else, so you can't move or rename it until you stop using it.
What is it you are trying to do?
Simon
|
|
|
|
|
hi,
I have an application that contains several forms.
At a given time an user can be accessing any of the forms.In such a case whre exactly do i put my code to check for user idle time that is with which event do i associate this code to check for idle time?
Can i create a job for this purpose? if so how do i get the job to run at specific intervals in the background while the main application runs?
|
|
|
|
|
There is no event for this I discovered. System wide Idle can be easily checked but not application constrained.
I needed this in a previous application myself so ended up creating a component to do it. You could maybe use the component in my article[^] to acheive this.
DaveBTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)
Why are you using VB6? Do you hate yourself? (Christian Graus)
|
|
|
|
|
What exactly is idle time?
When a user is reading the form and figuring out what to do with it?
When the user has determined what to do and is moving the mouse to a button?
I'd also want to know why you want to measure it.
|
|
|
|
|
what is the size of reference variable
“You will never be a leader unless you first learn to follow and be led.”
–Tiorio
"Coming together is a beginning, staying together is progress, and working together is success." Henry Ford
|
|
|
|
|
Size doesn't matter.....
forgot the joke icon
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
This was the question asked me in an interview.
“You will never be a leader unless you first learn to follow and be led.”
–Tiorio
"Coming together is a beginning, staying together is progress, and working together is success." Henry Ford
|
|
|
|
|
OK - that has to be a contender for daftest technical question you're likely to receive in an interview. Unless you're going for a really senior post, I wouldn't expect that you'd carry this round in your head. I certainly wouldn't mark you down for not knowing it.
"WPF has many lovers. It's a veritable porn star!" - Josh Smith As Braveheart once said, "You can take our freedom but you'll never take our Hobnobs!" - Martin Hughes.
My blog | My articles | MoXAML PowerToys | Onyx
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
