Pass selected row in Datagrid view to another datagrid on another form - Visual Basic Discussion Boards

PAguilar099-Sep-09 3:28

9-Sep-09 3:28

well im at work right now and dont have the code on me
but it was just like stevens code

but the good thing is i got it to work
but the only thing im still trying to figure out

is when a user enters lets say: 12345

the thousands should show 12
but right now it onlh will display 1 only
and the hundreds and ones and tens do work properly

i was thinking maybe an if statement???

the only change i made to stevns case was added
step -1 to the end of the for loop

Re: Vb.net Break Down Number HELP

Ian Shlasko8-Sep-09 5:47

Ian Shlasko

8-Sep-09 5:47

Well, if you parse it into an actual integer, instead of using it as a string, it gets easier, using a combination of the "mod" (modulus) and "div" (division without remainder) operators...

123,456 mod 1000 = 456
456 div 100 = 4

So your "hundreds" place is (X mod 1000 div 100)

If you want to get more than just the one digit, like your other replies, skip the "mod" step and just run it through a div.

123,456 div 100 = 123

Proud to have finally moved to the A-Ark. Which one are you in?
Developer, Author (Guardians of Xen)

Re: Vb.net Break Down Number HELP

dan!sh 8-Sep-09 7:55

dan!sh

8-Sep-09 7:55

You can use String.ToCharArray method. Then use TryParse to check if the character is an integer and then display it.

It's not necessary to be so stupid, either, but people manage it. - Christian Graus, 2009 AD

Cache datatable [modified]

helelark1237-Sep-09 23:10

helelark123

7-Sep-09 23:10

Hello,

I am writting an aplication in VB.NET (not a website)

I would like to cache a datatable to save time when loading program, I will fill the datatable according to cache.
Here my code:

Imports System.Web.HttpRuntime

dtSynchronize = DirectCast(Cache("dtSynchronize"), DataTable)
If dtSynchronize Is Nothing Then
dtSynchronize = New DataTable

dtSynchronize.Columns.Add("EntryID", System.Type.GetType("System.String"))
dtSynchronize.Columns.Add("SyncData", System.Type.GetType("System.String"))
dtSynchronize.Columns.Add("StoreID", System.Type.GetType("System.String"))

End If
dtSynchronize.Rows.Clear()
dtSynchronize.Rows.Add("1", "2", "3")
Cache.Insert("dtSynchronize", dtSynchronize)

It works fine but when I am closing the application and opening it again, I expect that after the first line of code the dtSynchronize will not be Nothing but it is.
The cache is not saved.

Thank you

Shay Noy

modified on Tuesday, September 8, 2009 5:41 AM

Re: Cache datatable

helelark1237-Sep-09 23:56

helelark123

7-Sep-09 23:56

I found other solution by storing the datatble in a file and it works fine. Although, if someone has solution for storing it in a cache, please advise
Thank you

Shay Noy

Re: Cache datatable

Ashfield8-Sep-09 1:22

Ashfield

8-Sep-09 1:22

As a cache is only an area of memory it will disappear when your application closes unless you save it to disk or a database

Bob
Ashfield Consultants Ltd
Proud to be a 2009 Code Project MVP

Re: Cache datatable

helelark1238-Sep-09 1:56

helelark123

8-Sep-09 1:56

Thank you, I understood it later, I though it is the same cache like in ASP.net.

Shay Noy

Pass selected row in Datagrid view to another datagrid on another form

ShabRaza7-Sep-09 12:09

ShabRaza

7-Sep-09 12:09

Hi, I am fairly a newbie to vb.net and am developing an inventory control windows application for a client.

I am creating a search form for my application. This search form searches the categorys table and returns the results in a datagrid view. The search bit of it is working, however what i want it to do next is not working!

I have a button on the Search form called "Return Data". Once the search results have been displayed in the datagrid view, the user will then select/highlight the row that they need. They will then click on the "Return Data" button and this button should then return the selected row in the datagrid view and display it in another datagrid view on another form.

I am just finding it extremely difficicult to getting this sorted. I have not got anywhere with it. Any sample code would be most appreciated.

Thanks

Re: Pass selected row in Datagrid view to another datagrid on another form

Christian Graus7-Sep-09 12:39

Christian Graus

7-Sep-09 12:39

ShabRaza wrote:
Hi, I am fairly a newbie to vb.net and am developing an inventory control windows application for a client.

I pity the person who uses an inventory system written by a newbie. The world is insane.

ShabRaza wrote:
Once the search results have been displayed in the datagrid view, the user will then select/highlight the row that they need. They will then click on the "Return Data" button and this button should then return the selected row in the datagrid view and display it in another datagrid view on another form.

The can select more than one row ? This Ui sounds odd, but you can iterate over your rows and check which have the selected property set to true.

Christian Graus

Driven to the arms of OSX by Vista.

Read my blog to find out how I've worked around bugs in Microsoft tools and frameworks.

Re: Pass selected row in Datagrid view to another datagrid on another form

ShabRaza8-Sep-09 1:54

ShabRaza

8-Sep-09 1:54

I pity immature people like you who make assumptions about others on a flip of a coin.
I wanted advice on helping me resolve a problem, not having someone make a dig at me. In the end you werent much useful and next time keep your opinions to yourself!

[Message Deleted]

Hurricane30008-Sep-09 7:21

Hurricane3000

8-Sep-09 7:21

[Message Deleted]

Re: Pass selected row in Datagrid view to another datagrid on another form

ShabRaza9-Sep-09 5:16

ShabRaza

9-Sep-09 5:16

To Hurricane3000

First of all i would like to ask, who involved you in this conversation? cos i sure as hell didnt. The comment i made was only intended for the person who made those comments to me and I dont remember asking anyone else's opinion!

After having some difficulty reading your message, i think you need to go find out and evaluate the difference between a "playful comment" and "personal offence". Since when does it make a difference on your programming ability if you are "unable to understand difference between a "playful comment" and a "personal offence"! ". I think you need to get your head checked out. I think being a good programmer is dependant on your technical ability amongst other IMPORTANT factors and not minor and irrelevant things.

I do not wish to carry this conversation any further as it is pointless. so if you have any sense dont reply back.

Re: Pass selected row in Datagrid view to another datagrid on another form

Hurricane30009-Sep-09 9:25

Hurricane3000

9-Sep-09 9:25

I wish you to end soon your program ShabRaza.

Good night.

Re: Pass selected row in Datagrid view to another datagrid on another form

dcdhingra8-Sep-09 5:14

dcdhingra

8-Sep-09 5:14

Hello

Are you having ID filds in DGV.If you having then u can easly send selected rows into another dgv on another form.

When you select that row then just get id of that row, and when return data button is clicked then add new row on other dgv and send value from one dgv to another dgv.

The another method is that check which row is select using selected = true. Create object of another form and access DGV using anohterformobj.Datagridview. and add selected records on another dgv.

Regards
DC

Re: Pass selected row in Datagrid view to another datagrid on another form

εїзεїзεїз8-Sep-09 6:13

εїзεїзεїз

8-Sep-09 6:13

Actually their are several ways to do this depends upon the criteria and structure of the application

lets suppose you need to show

=-=-Item Code=-=-=-=-Item Name=-=-==-=-category Name=-=-=-=-=-=-Units=-=-=-=-=-=-Qty
on the Destination form then on your Search/Lookup Form you can have some other columns like

=-=-Item ID======Category ID-=-=-=-=--

but hide them along with your other columns and dont show them to the end user when user will select any row then it will bring with it that item id, category id etc.. take only Keys as hidden columns

you can take this id and then can make a query to get your desired results and can populate your fields,
will not recommend you to open Costly connections again and again means to go to the database and bring your information time to time

Dont bring information other then Keys in hidden columns because if their will be any change on that data lets say you had populated in your grid and some other user changed the item Name or some other information in this case you will have still old value in the grid so bring only the IDs as hidden column and then fetch your desired data from db

Best Of Regards,
SOFTDEV
Sad like books with torn pages, sad like unfinished stories ...

Access Is Denied while checking process terminated or not.

Gagan.207-Sep-09 7:15

Gagan.20

7-Sep-09 7:15

Hi all.

I am trying to check whether a process has terminated or not by its process id.
I put my code in a timer object to continuously check whether process has terminated or not.

code is :

Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick

        If Process.GetProcessById(ProcessID).HasExited Then  'processId is publicly defined and doesn't store null value
            Cursor = Cursors.Default
            Timer1.Dispose()
            msgbox("Process has been terminated")
        End If

    End Sub

but each time timer starts, it gives an "Access is Denied" error message at line

If Process.GetProcessById(ProcessID).HasExited Then

what should I do to check whether the process has terminated or not.

Thanks.

Gagan

Re: Access Is Denied while checking process terminated or not.

Luc Pattyn7-Sep-09 8:09

Luc Pattyn

7-Sep-09 8:09

Hi,

if you are logged in as a regular user and try to get information on a process that isn't yours, Windows will give you an "access denied" error (at least on Vista and 7, not sure for others). In general you have no rights on objects that don't belong to you.

BTW: An admin has no problems, Process.Exited does not need elevation.

Smile | :)

Luc Pattyn

Badger | [badger,badger,badger,badger...]

Have a look at my entry for the lean-and-mean competition; please provide comments, feedback, discussion, and don’t forget to vote for it! Thank you.

Re: Access Is Denied while checking process terminated or not.

Gagan.207-Sep-09 16:48

Gagan.20

7-Sep-09 16:48

Thanks Luc for your help but I already logged as "Computer Administrator"
(in Windows XP) but the same problem occurs all the time.

process.HasExited 'Access is Denied.

Is there any other way to check whether process has terminated or not, if yes then tell me.

Thanks.

Gagan

Re: Access Is Denied while checking process terminated or not.

Luc Pattyn8-Sep-09 0:38

Luc Pattyn

8-Sep-09 0:38

What process is it you want to check? Dit your app launch it?
Your code works fine for me checking my browser.

Smile | :)

Luc Pattyn

Have a look at my entry for the lean-and-mean competition; please provide comments, feedback, discussion, and don’t forget to vote for it! Thank you.

Re: Access Is Denied while checking process terminated or not.

Gagan.208-Sep-09 0:46

Gagan.20

8-Sep-09 0:46

I am executing "cmd.exe" and getting its process id to check whether "cmd.exe" has terminated or not but all the time it gives the same "Access is Denied" error message.

Re: Access Is Denied while checking process terminated or not.

Luc Pattyn8-Sep-09 1:05

Luc Pattyn

8-Sep-09 1:05

Hi,

two suggestions:

1.
For processes that your app started, choose one of several Process.Start overloads that return a Process instance, so you don't need Process.GetProcessById()

2.
Rather than periodically checking Process.HasExited, you could have a thread (Thread, ThreadPool, BackgroundWorker) wait for its exit with Process.WaitForExit which also needs the process instance.

Smile | :)

Luc Pattyn

Have a look at my entry for the lean-and-mean competition; please provide comments, feedback, discussion, and don’t forget to vote for it! Thank you.

Display one value in combobox, but use another.

Nielvh7-Sep-09 2:00

Nielvh

7-Sep-09 2:00

I have a table populated with details of people (Name, tel, address, etc.) Each record has a unique key. I want to fill a combobox with the names, but when a user clicks on the name I want to use the unique identifier to get the corresponding detail. Below is my code to fill the combobox. How should I change this so that the combobox also knows what the unique identifier is?
I am new to programming, so any other comments on my code would also be appreciated.
Thanks for any help.

Private Sub GetContactNames()
        Dim SqlContactname As String _
                    = "SELECT _rtblPeople.idPeople, _rtblPeople.cDisplayName " _
                    & "FROM _rtblPeople, _rtblPeopleLinks " _
                    & "WHERE _rtblPeopleLinks.iDebtorID = @customercode " _
                    & "AND _rtblPeopleLinks.cModule = 'AR' " _
                    & "AND _rtblPeople.idPeople = _rtblPeopleLinks.iPeopleID"

        Dim Sqlparam As SqlClient.SqlParameter
        Sqlparam = New SqlClient.SqlParameter("@customercode", SqlDbType.Int)
        Sqlparam.Value = My.Settings.CustomerCode

        Using conn As New SqlConnection(CntString)
            Try
                conn.Open()
                Dim MyCommand As New SqlCommand(SqlContactname, conn)
                MyCommand.Parameters.Add(Sqlparam)
                Dim datareader As SqlDataReader
                datareader = MyCommand.ExecuteReader
                While datareader.Read()
                    ContactNameField.Items.Add(datareader.Item("cDisplayName"))
                End While
                datareader.Close()
                conn.Close()
            Catch myerror As SqlException
                MessageBox.Show("Error Connecting to Database: " & myerror.Message)
                conn.Dispose()
            End Try
        End Using
    End Sub

Re: Display one value in combobox, but use another.

Luc Pattyn7-Sep-09 2:44

Luc Pattyn

7-Sep-09 2:44

Hi,

you could create a little class describing an item in the combobox.
Then tell the ComboBox where the list of items is (DataSource), which property to use for displaying (DisplayMember) and which one for processing (ValueMember).
MSDN holds examples for all this.

Smile | :)

Luc Pattyn

Have a look at my entry for the lean-and-mean competition; please provide comments, feedback, discussion, and don’t forget to vote for it! Thank you.

Re: Display one value in combobox, but use another.

Nielvh7-Sep-09 23:21

Nielvh

7-Sep-09 23:21

OK, I think I managed to create the class and it seems to work, except when I have names in the combobox that are identical. Say I have values John(1), Paul(2), John(3). When I select the first John other fields on the form is refreshed using the correct value (1). When I select the second John it also works fine using the correct value (3). The problem is when I leave the comboxfield another SelectedIndexChange is fired and the value then changes to (1). When I select Paul I have no problem.
Here is the class I created - I copied the format from sample code:

Public Class myLookupClass
    Private iID As Integer
    Private sValue As String

    Public Sub New(ByVal DisplayValue As String, ByVal ID As Integer)
        iID = ID
        sValue = DisplayValue
    End Sub

    Public Property GetLookup() As Integer
        Get
            Return iID
        End Get
        Set(ByVal value As Integer)
            sValue = value
        End Set
    End Property

    Public Overrides Function ToString() As String
        'Return MyBase.ToString()
        Return sValue
    End Function
End Class

I populate the combobox like this

While datareader.Read()
                    ContactNameField.Items.Add( _
                    New myLookupClass((datareader.Item("cDisplayName")), _
                    (datareader.Item("idPeople"))))
                End While

Any thoughts on were I am going wrong?

Re: Display one value in combobox, but use another.

Johan Hakkesteegt7-Sep-09 23:40

Johan Hakkesteegt

7-Sep-09 23:40

In some way, the names that you are showing (display values) should be unique. If there are going to be two or more the same, how will the user know which one he should pick?

In other words, if you solve that problem, you also won't have this problem.

My advice is free, and you may get what you paid for.

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.