|
Whoops, my bad. There is finally an SDK out for multi-touch support, but in for Windows 7. Here[^]
What you're referring to was/is a research project at Microsoft called Surface.
|
|
|
|
|
Dear friends,
i want to add some more content on (vista) file tooltip how to do that?
i have added summary information and that is show in 2003, and xp but it not in vista
tell me is there any settings to chage? in the vista os to view summary information in vista file tooltip.
plz help me ...
any link? idea? suggestion ?
thank you
joe.I
|
|
|
|
|
Hi,
OS: Windows Vista
As of now I am trying in vista, but same thing i will try in all other microsoft OS.
I have created the scheduled task through command line to invoke one exe.
Now I want to make that schedule run my exe only once, i mean only instance should run. If there are no instances then it should start one.
In task scheduler, for task properties, in settings tab i have "if the task is already running, then the following rule applied" option, where i can set "Do not start a new instance".
I want to set the rule in Task Scheduler's settings as "Do not start a new instance".
But through command line how to set the same.
Thanks in advnace.
Regards,
KTTransfer.
|
|
|
|
|
I have a windows 2003 server with active directory. and windows vista 64 ultimate and i map share folders of my server to some drive letters. but after period of time after i login. if i click on network drive i get and error of logon failure, but i can ping server and i can also browse the share folder by giving the ip address of server with share folder name. if i logoff and logon again the problem will solve. if i also open the share folder and not close the window the diconnection not appear.
|
|
|
|
|
Hi, I my e-mail archive system, I found that a spam message was send to my cleint but in the To box do not display any address. Does anyone know why the To box is not display the message? How could I make its address appear in the To box?
I use Ms. Outlook 2003 to get my archieve e-mail.
Thank in advance!!!
|
|
|
|
|
In outlook, right click the message and select options. In the bottom of the options window you can read the internet headers with all the info about the mail as it arrived to the outlook client.
If you need help to interpret it you can post it here, just keep in mind that there might be info that you don't want to give people outside your own organisation.
|
|
|
|
|
You might have been mentioned in the Bcc of the message.
Vasudevan Deepak Kumar
Personal Homepage
Tech Gossips
The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep!
|
|
|
|
|
I've now tried installing Expression Studio 3 three times (downloaded via the WebSiteSpark) program. The first two I tried a mounted ISO, and for the third, I wrote the image to CD. With all three, a few seconds after booting, and a BSOD that requires speed-reading to comprehend, the machine restarts, ad infinitum.
I can start in safe mode and do a system restore to a checkpoint created yesterday, before the logged changes for today, which are "Installed DirectX". After the restore, everything is fine.
I'm running XP SP2 on an HP Pavilion dv9205us, but had to cheat and use drivers for another HP, as no XP drivers are available for this one. Any advice on how to diagnose or fix this issue will be greatly appreciated.
|
|
|
|
|
Ah the lightning BSOD. Next time you install it and it starts with the BSOD, reboot and tap F8 and when the Windows Advanced Boot options come up select Disable Automatic Restart on System Failure. That will give you all the time you need to read the BSOD. If it works in normal Safe mode it appears that there is a conflict with some driver. If you have Windows debugger you can look inside the actual dump file to find out what the problem is. About 90% of BSOD's are fixable. If you don't have windbg you can download it from microsoft, or if you'd rather. You can email me the minidump files located at c:\Windows\Minidumps and I will debug it and let you know what I find. Maybe We can get it to work.
Zach
|
|
|
|
|
|
Please do not post questions in more than one forum; read the guidelines.
|
|
|
|
|
i have a problem on windows a dll always executing and causing error ...
i dont know what to do ..
i need help please ..and always appear > Error Loading C:\Windows\mcrdsvi.dll >> access denied.
syntax error
|
|
|
|
|
Never heard of that .DLL. Are you sure you got the filename correct?
Anyway, you've got a process running that trying to load that .DLL. Does the message come up after you launch any particular app? Does it come up by itself without you doing anything? What are the circumstanaces that trigger this event??
|
|
|
|
|
I am able to install the SQL Express 2005 using command line but I don't want to install any shortcut in the Program menu.
how can I do that?
|
|
|
|
|
Hi
i need to buy a computer for multimedia studies i.e. 3d max etc
can anybody assist me by giving a system configuration for my studies.
|
|
|
|
|
|
William,
Your best bet is to go to the mfg's website and look at the recommended system configuration for the application. You may find that it is much harder to build a fully qualified system than you think.
Just to give you an idea - I once built a system specifically designed for AVID video editing. For the real time editing components (renderless), it needed a firewire controller that had to use the Texas Insturments chipset. On top of that, the card itself had to have a dedicated bus segment to the system's chipset controller, and it could be the only device on that bus segment.
What am I trying to say?
Building a system for specialized application handeling is not a simple task. If you have never done it before, I would shy away from doing so.
However, if you decide you do want to try and tackle it, you need to know that this type of system building is kind of like installing Gentoo Linux - no one can do it for you. Here are a few things to keep in mind though: you need to pair everything for best possible performance - but this isn't always what you think. For example - when specifying RAM to include into the machine, you want the motherboard's front-side bus (FSB) to match the RAM's FSB and the chipset's FSB. This will insure there are no bottle necks on the processing side of the system (the GPU will have it's own thing going on for it's memory speed). You also want to make sure that the RAM is rated ECC and fully buffered (ECC stands for "Error Corection Codes", it simply means that the unit is error correcting). ECC RAM will make your renders out of any 3D application more reliable (they won't get to 90% and fail). I know from personal experience that 3DS Max and Maya are very particular about the hardware installed in the system (more so Maya than 3DS). Hardware compatibility issues at the application layer are very difficult to troubleshoot. You might bump up the lumens on a light in a scene or turn on Global Illumination and get all kinds of errors dumping to the output window.
Some other things you want to include in your research are operating system compatibility, architecture support (x86 vs. x64), video hardware support (don't use ATI, Nvidia will have much better support for your application), processor type (single core - single socket all the way through multi core - multi socket) and supported instruction sets (MMX, SSE, SSE2, etc.).
The plot thickens when you start adding other primary applications into the mix, like Photoshop, After Effects, AVID, etc. These programs have their own requirements and may create a whole new level of complexity when installed on the same system as the 3D applications.
If you have ever installed a Gentoo Linux system - the comment about it earlier may start to make sense. Building a custom system for tasks such as the one you described is your perfect balance of seriousness, budget, application usage, and speed.
If I have turned you off of the idea, look to a major hardware vendor like HP (not system builder like Dell) for a configuration designed for a particular industry (eg: DCC). You can most likely get a nice student discount for one of the said workstations. And the biggest bonus: it comes with support.
Sorry about the novel of a message...
-david
|
|
|
|
|
Wasn't sure where to go with this one, hoping someone can help...
Is it possible to create folders within a folder using the names of the files already contained in the folder?
say what!?
Folder named: MainFolder
Mainfolder contains 300 pdf files each with its own name (acr901, acr906, pnt76, etc...)
Within MainFolder I'd like to create a folder for each of those files (acr901, acr906, pnt76, etc...) then insert the file into that folder.
What do you think?
I have several folders containing 300 or more files in which I'd like to do this.
Thank-you for your help.
|
|
|
|
|
Sure, so long as you don't include the .PDF extension in the folder names, it shouldn't be a problem at all.
|
|
|
|
|
Really? You think you have a minute to give me some sort of direction on how?
If you want.
|
|
|
|
|
What's so hard about this? You use three standard methods on two classes in the System.Io namespace: Directory.GetFiles, Path.GetFileNameWithoutExtension, and Directory.CreateDirectory. I'll leave it as an excersize to you to figure out code required to do three simple steps, get the list of files from a folder, get the filename portion (no extension) of each filename, and create a new folder using that name. It's possible to do in three lines of code.
|
|
|
|
|
Hi,
Paste this into a new batch file and execute it:
echo off
for /f %%a IN ('dir /b *.pdf') do mkdir %%~na
pause
It will make a folder for each PDF file while excluding the extension.
Best Wishes,
-David Delaune
|
|
|
|
|
Hi, if I set an image with its size 2Mb or 5Mb as a desktop background, does this will impact the startup performance of windows xp?
Thank in advance!!!
|
|
|
|
|
Mekong River wrote: Hi, if I set an image with its size 2Mb or 5Mb as a desktop background, does this will impact the startup performance of windows xp?
What happens when you try it?
|
|
|
|
|
My system load very slow than usual when I logged on to my profile.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
