|
Hi,
I solved my problem, it's bettwen my ears!
I used the same procedure for calculating the ID3v2.3 size and the individual frame size.
But the ID3v2.3 size is 4 bytes (0xxx xxxx) and the frame size is a simple 32 Bit Integer 4 Bytes !!!
Ah!
I changed the code and it works!
Thanks for helping me!
Michael
|
|
|
|
|
Glad you fixed your problem!
Just watch out if you move to ID3V2.4 looks like there are some other changes there waiting to catch you out!
|
|
|
|
|
Thanks in Advance
Does some one has worked on L1 Identity Solutions " Bioscrypt Vstation" its a biometric Fingerprint Card Reader device.
The problem i am facing is they gave API to integrate the Machine with my Software but in that SDK , their is no option to specify that which machine you want to Read/Access for downloading the data , I am using TCP/IP protocols
for example this API BII_Close_TCPIP_Communications will close the connection but where or how can i specify the Machine that i want to close Machine A connection or machine B connection.
Best Regards,
SOFTDEV
If you have knowledge, let others light their candles at it
modified on Wednesday, January 27, 2010 3:23 AM
|
|
|
|
|
Well, here is what i just did;
Opened Google and searched for Bioscrypt Vstration
It gave me the companies website; in their Search box i put BII_Close_TCPIP_Communications
and it gave me a PDF with some release notes; in the PDF there was some DLL command references;
BII_VS_Get_IP_Address: Retrieves the IP address stored to the CM’s flash.
• BII_VS_Set_IP_Address: Sets the assigned IP address stored to the CM’s flash.
• BII_VS_Get_DHCP_Mode: Retrieves whether or not DHCP is on or off.
• BII_VS_Set_DHCP_Mode: Enables or Disables DHCP.
• BII_VS_Get_Current_IP_Address: Retrieves the Active IP Address.
• BII_Initialize_Socket_Communications: Performs required initialization for TCPIP communications.
• BII_Open_TCPIP_Communications: Establishes a communication path with a V-Station.
• BII_Close_TCPIP_Communications: Closes the communication path with a V-Station
• BII_Cleanup_Socket_Communications: Closes out and cleans up resources that were consumed in BII_Initialize_Socket_Communications.
• BII_Get_Current_TCP_Port: Returns a value indicating what port the DLL is assuming for V-Station Ethernet communication.
• BII_Get_Current_Host_Name: Returns the host name.
• BII_Is_Using_TCPIP: Returns a value indicating whether or not the DLL is currently assuming TCPIP for communication with a V-Station.
• BII_Get_Socket_Buffer_Size: Returns the size of the Buffer being using by the TCP or UDP Socket.
• BII_Set_Socket_Buffer_Size: Specifies the size of the buffer to be used by the TCP or UDP socket.
• BII_Get_Local_IP_Address: Returns the IP address of the PC for which the DLL is being called from.
• BII_Get_Subnet_Mask: Returns the value of the subnet mask the DLL is using during Ethernet communication.
• BII_Set_Subnet_Mask: Specifies the value for the subnet mask the DLL will use during Ethernet communication.
• BII_Set_Window_Handle: Sets the Windows handle of the calling window needed to establish socket communication.
Now you can maybe look these up in your SDK to find the information!
|
|
|
|
|
Thanks for the Replay
Yes i have the API's but whenever i call API it does not return true , its not even Establishing Connection.Its my 5 machine Brand but is worst ever not a good interface provided.
BII_Read_Transaction_Log (0x0741)
int BII_Read_Transaction_Log (int option, int updateFlag, int maxEntries, unsigned char *log)
*log A pointer to a buffer to hold the Transaction Log data.
Do you know what *log is
Best Regards,
SOFTDEV
If you have knowledge, let others light their candles at it
|
|
|
|
|
Sorry, i cannot help any more, don't use it or have any knowledge on the product. its maybe time to email their support!
It looks like *log is just as it says a pointer to a buffer of data. So you probable need to create a variable to pass into the function which will then get populated with the data.
|
|
|
|
|
Thanks for replying , i emailed them twice in last 4 days but no response , their support is veryyyyyyy
bad , anyhow thanks again 
Best Regards,
SOFTDEV
If you have knowledge, let others light their candles at it
modified on Wednesday, January 27, 2010 3:24 AM
|
|
|
|
|
Your best source of information is going to be the company that wrote the API. It is extremely unlikely you're ever going to find someone on these forums that has used that library.
|
|
|
|
|
Yes , you are right , contacted them twice but all in vain. 
Best Regards,
SOFTDEV
If you have knowledge, let others light their candles at it
|
|
|
|
|
Hi All
I am using an login window for my apllication.
The application needs to find the username of the currently loggin system .
is it possible to retrieve the information...Kindly help me..I m using VB6
Thanks
|
|
|
|
|
If you are building a logon screen that implies you are STARTING a development, logon being one of the first things you need.
If this is so then STOP - you are using a platform that is no longer supported and should be allowed to drift into history. Download the .Net versions and start using that technology, you will find lots of support and help for the .Net version and they are FREE.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
hellogany wrote: is it possible to retrieve the information...
Yup, example can be found here[^].
I are Troll 
|
|
|
|
|
I am using VBA (Access 2007) for my project. On the form load, listview retrieves data from the db but gets problem (Error Message : Type mismatch).
Here is my code.
Dim Rst As New ADODB.Recordset
Dim Str As String
Rst.CursorLocation = adUseClient
Str = "Select * From qry_staff_info Order By sID"
Rst.Open Str, Application.CodeProject.Connection, adOpenDynamic
If Rst.RecordCount < 0 Then Exit Sub
If Rst.RecordCount > 0 Then
Do While Not Rst.EOF
Dim lvwItem As ListItem
Set lvwItem = Me.lvwStaff.ListItems.Add(, , Rst![insurno]) ''''''' This the line which debug and show the error message (Type mismatch)
lvwItem.SubItems(1) = Rst![sname]
lvwItem.SubItems(2) = Rst![bgroup]
lvwItem.SubItems(3) = Rst![gender]
lvwItem.SubItems(4) = Rst![dob]
lvwItem.SubItems(5) = Rst![doj]
lvwItem.SubItems(6) = Rst![Position]
lvwItem.SubItems(7) = Rst![location]
lvwItem.SubItems(8) = Rst![Address]
lvwItem.SubItems(9) = Rst![Telephone]
lvwItem.SubItems(10) = Rst![martialstatus]
lvwItem.SubItems(11) = Rst![nod]
Loop
End If
Thanks,
Chuon Visoth
Angkor Wat - Cambodia
asp.net - c sharp beginner
|
|
|
|
|
misCafe wrote: (Error Message : Type mismatch)
Could that be caused by insurno being a number? Try converting it explicitly;
Set lvwItem = Me.lvwStaff.ListItems.Add(, , CStr(Rst![insurno]))
I are Troll
|
|
|
|
|
Thanks so much for your help. The problem is fixed. 
Anyways, I want to click on the ListView Item and load its values from each colums to the TextBox, ComboBox. It is the better way to update the record.
Chuon Visoth
Angkor Wat - Cambodia
asp.net - c sharp beginner
|
|
|
|
|
You're welcome
I are Troll
|
|
|
|
|
Hope you guys can help, because I'm stumped on this one. Okay, so I have a VB.NET 2008 program I'm writing, I'm trying to load some PHP reports in a WebBrowser control. On one form there is a WB control and the different buttons for different reports, two of them have to be able to be filtered by date, user, etc., so on those another form opens up with those options. All of this works fine, the options set variables for use in the url to the report, but when I try to navigate to the the report's url, the WB control does nothing.
I figure I need to reference the open instance of the child form with the browser on it, but I haven't been able to find how to do that.
Anything you guys can help me with would be appreciated. Thanks!
|
|
|
|
|
You can access all the open forms in your application via the My.Application.OpenForms methods.
Expose a public method on one form and pass a variable across from the other form e.g. To pass a value to Form1 from Form2
Form1.SomeMethod(SomeVariable)
Then in the SomeMethod on Form1 build the new browser url and navigate to it.
|
|
|
|
|
don't know why, but I can't seem to get a value to pass across.
Public Function GetURL(ByVal report As String)<br />
Return report<br />
End Function
It just returns Null no matter what I put into it. Don't think I'm doing anything wrong but I might be, help me out please.
|
|
|
|
|
OmegaMaximum wrote:
Public Function GetURL(ByVal report As String)
Return report
End Function
aren't you missing the return type in your function header, example
Public Function GetURL(ByVal report As String) As String
Return report
End Function
|
|
|
|
|
Thanks for pointing that out, but it still won't work. After some testing with message boxes, I've found that it just seems to stop after the Return line. No matter what I put after the Return is ignored.
|
|
|
|
|
it will, the Return effectively steps out of the function as if to say, "i've done everything i need to do, now return to the caller"
|
|
|
|
|
Thanks for all your help guys, I got it to properly reference the opened instance of the form with this,
Dim f1 As frmMain_A_C = CType(My.Application.OpenForms("frmMain_A_C"), frmMain_A_C)
Thanks again for all the help!
|
|
|
|
|
Hi,
The default scrollbar of windows seems to be to narrow for the ListView i'm developing for the application, this is why i have created a custom ScrollBar. The question is how do i attach the scrollbar to the listview that when scrolled the listview will scroll.
Please advice.
Thanks
|
|
|
|
|
Why does it seem too narrow? it will be standard across the OS, if you try and change one scrollbar in your application, it will then look different to everything else and just seem a bit odd.
I don't know how to do it without spending hours searching the docs and google etc. So hopefully someone more knowledgeable will respond, but one method would be to set up your scrollbar relative to the number of items in the listview, and then when you scroll, change the listview.topitem property to simulate a scroll. You would have to monitor the listview changes also, as well as what to do if the user uses arrow up and down while listview has focus.
Seems way to much effort for something that you should not need to think about. i.e. leave the original scrollbars as is.
modified on Sunday, January 24, 2010 3:27 PM
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
