|
Hello,
Never i spelt coffee or water on my keyboard.I try with a floppy disc but it can't reboot also.
Thanks
|
|
|
|
|
Tunisien86 wrote: Never i spelt coffee or water on my keyboard.
No smoking and drinking behind the keyboard?
Tunisien86 wrote: I try with a floppy disc but it can't reboot also.
From which we deduce that you have a floppy-drive. I'm going to guess that it's booting to the harddisk without even trying the floppy.
Which brings you indeed to the BIOS-settings, which will vary depending on your brand. You can usually enter the BIOS by hitting the DEL key a few times, just before the PC tries to boot. There should be some entry that defines in what order to "try" the bootdevices.
That won't repair your PC btw, it would only allow you to boot again. From there-on, you'd still have to repair the system.
An alternative option would be to create a CD that you can boot from. There are various Live-CD's available for download, complete with virusscanners
I are Troll
|
|
|
|
|
Time to reinstall.
Morality is indistinguishable from social proscription
|
|
|
|
|
hello friend, you can recover your OS,frist you should set your first boot device in CMOS System.
you can press del when your compute start and enter BIOS System,there you can set your first boot device
maybe my answers is not available for you , ps: I am freshman in this field...
|
|
|
|
|
Hi,
I enter the bios system but I doesn't know what option i choose?
Also i don't understand u sentence:,first you should set your first boot device in CMOS System.
Can u help me to know how using CMOS sytem bios.
Thanks
|
|
|
|
|
|
just go with "Last known good Confg." option, it will surely help u to open ur PC.
If still it doesn't work, pls let me know, I will help u then.
|
|
|
|
|
Just put the CD and boot, when it gives you the press "any Key..." dialog with a different Keyboard then the one you are currently using hit spacebar, let setup start, hit "f8" at the license agreement all that jazz and instead of giving you the format drive screen it will let you reinstall right over the old install you may have to re-register some programs but it is the easiest "dead-OS" fix I know of.
- OR -
The other option is go into the bios options and systematically disable Devices until your OS starts. What this does is gives you a couple of hints as to what the issue is/was. If a piece of Hardware Died you will know when you re-enable it. However I find that is usually not the case, I seem to come across more often is IRQ conflict, You install some program that tries to use some IRQ that is already bound up and it crashes every-time upon boot, the solution I use in this latter case I start safe-mode with cmd-prompt. first thing i do is type "Explorer.exe" I do it this way because it is the least amount of windows to start and still be useful (I like the mouse) Then I do a quick regedit and remove the last thing I installed from the key that deals with autostart along with the keys for the last thing I installed. If you didn't install anything the first or second fixes will take care of you.
If it has an OS, I've broken it(and the OS)...
If it has a problem, I've fixed it(Or worked around it)...
If it is older than dirt, I love it(Then I install an OS and break it)...
|
|
|
|
|
cpu is not supporting high resolution of monitor, shutdowns..Is it Monitor Problem. if so then why CPU shuts down
SOFTDEV
If you have knowledge, let others light their candles at it. [ Let's work to help developers, not make them feel stupid ]
|
|
|
|
|
S0FTDEV wrote: cpu is not supporting high resolution of monitor
What does this mean? There is no direct connection between CPU and monitor.
S0FTDEV wrote: shutdowns..Is it Monitor Problem.
Again what does this mean; is what a monitor problem?
It's time for a new signature.
|
|
|
|
|
CPU shuts down when i connect it to a high resolution monitor. Is this VGA(CPU) problem or Monitor's problem. off course they are connected
SOFTDEV
If you have knowledge, let others light their candles at it. [ Let's work to help developers, not make them feel stupid ]
modified on Thursday, April 29, 2010 7:55 AM
|
|
|
|
|
Well that's your problem, don't connect the monitor to the cpu, connect it to the monitor outlet.
It's time for a new signature.
|
|
|
|
|
Richard MacCutchan wrote: don't connect the monitor to the cpu, connect it to the monitor outlet.
its not lounge
SOFTDEV
If you have knowledge, let others light their candles at it. [ Let's work to help developers, not make them feel stupid ]
|
|
|
|
|
S0FTDEV wrote: its not lounge
I appreciate that, but your question was not very clear; I was trying to get some more information.
It's time for a new signature.
|
|
|
|
|
By CPU he probably means the PC.
|
|
|
|
|
Trollslayer wrote: By CPU he probably means the PC.
Really?
It's time for a new signature.
|
|
|
|
|
look, the problem could be better understand if u follow the below steps:
1. Check ur monitor with a or standard resolution monitor, I mean 1024 X 786. If ur CPU perform well , then Increase the Resolution gradually like: 1280 x 960 to 1600 x 1200 and on. [Do not disconnect ur monitor from CPU & Check ur Monitor cable is properly attached wd CPU or not]
2. After increasing resolution if ur CPU shutdown, then its an issue either with ur VGA card [if ur using any] or ur motherboard graphics chip doesnot support that high resolution.
3. In that case, borrow any VGA card from ur frnd and check it again.
I dont think it is a CPU issue.
|
|
|
|
|
Are you connecting to a Graphics Card or to a built in Video connector?
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
Hello!
I need redirect data from (one or several) 8-bit processor's port (378h, 3f8h, etc - former parallel printer's ports) to bit-bang device driver (FT232RL/FT245)?
The idea that some application will send data to specified parallel port, but my process shall intercept that data and route it to bit-bang device driver. The same way when processor shall read port - GE event shall make my process read data from bit-bang device and return it back to main application.
Have no idea even what a name of that technique? Barely remember, that it can be done throu processor’s GE on port range interception.
This is very popular USB chips and most useful interface issue,
maybe someone have solved similar hardware project's ?
Thanx.
|
|
|
|
|
Confusing.
Why would you want to redirect a com/parallel port to a software com/parallel port?
Anyway, it's not for me to ask, it's for me to deliver.
As always, you'll need to write your self a filter device driver, which is aware of all the IOCTLS for parallel and serial ports. These are defined in include files of the DDK. Then obtain yourself an object pointer to the device you want to intercept, and call AttachDeviceByPointer. From then on you can see all traffic on the port.
Now the other part: if you're going to use the standard USB drivers that come with the chips you mention, it's basically the same operation: attach to the target device, and send and receive away. If you're going to do the bit-banging yourself, you will have to implement a real device driver, not a filter driver. Again, examples can be found in the DDK.
Seems a lot of work for emulating a parallel port
I just hope that NT was your target operating system, otherwise I've been typing all this crap for nothing
|
|
|
|
|
Hello Michal!
I have target application that uses several LPT ports (1..3) to communicate with external equipment. I decided to use FTDI chip (FT245) and their FD2xx driver and support simple bitbang up to 48Mb/s. My computer doesn’t have LPT port, but 4 USB (nb). The target application was configured ti use two LPT ports. I need to intercept write target data, and send (reroute) to USB driver (following FTDI docs) and when target application shall read data from port, read data from chip (by USB driver) and return those data back to target application request.
I study this issue on inet, and havnt found reliable way to do this not so complicated task. In most cases ppl write (or use 3rd party) virtual port LPT driver, and uses it according to their tasks. But may be there are a way to use hardware BP exception on port range? If there are no similar that solution, i should use consecutive connection to a bigger of drivers list: my redirector, FTDI USB, virtual lpt.
|
|
|
|
|
This target application of yours, is this a 16-bit executable? If it is you could probably get away with writing a VxD that uses the port range interception technique. Unfortunately, VxD's are really a long way in the past for me, so don't expect too much help on that one. I even wouldn't know where to find a copy of the Windows 98 DDK anymore...
If it's a 32-bit executable, port range interception won't work. You're stuck with the WDK. Have a look at the ECHO sample (in KMDF). It's a simple software driver that creates a device, and just returns it's (sequential) input. So it basically already does what you want. If you extend it with the required IOCTL's (found in parallel.h), You're halfway there (Instead of echoing, you pass the output to the FD2 driver, and presto! (Well, not that simple )
|
|
|
|
|
Friends,
A year ago I was infected with СТС virus, as millions other was)). The real trouble with equipment is to provide true rapid data exchange with controller of steppers. My front program is machIII by artS0ft (32b/WinXP) require couple parallel hi-speed port to be present, it's a real trouble on highspeed even if those present physically.
I understand from above that I have to write IOCTRL driver...Honestly saying, I never did this previously but use MS asm/C++ for simple system tricks. I found this <a href="http://msdn.microsoft.com/en-us/library/ff540815.aspx">ECHO</a> example, but there are no download. Maybe you can kindly point me here on appropriative project to learn technique of WDK writing?
The most thing is my concern, that target application configured to work with LPT port by number, but not name. Besides,I traced through target with "DependWalkr" to detect all imported functions and DLL may be used for LPT exchange..
Thanks.
|
|
|
|
|
|