|
Hi out there!
What happens, if I initialize a std::istrstream with a NULL - pointer?? I guess, it could happen something like
1. will throw immediately.
2. will throw, when I try to >> somevalue
3. will show undefined behaviour (because it tries to guess the size of the string (char*)NULL points to ... and this is just undefined)
4. will work without problem and show standard behaviour (read: same behaviour as if I'd pass a valid char* and had read past the end of the stream)
Hope someone can clear this topic for me.
Best regards, Ralph
P.S: Sorry for posting this in THE LOUNGE first ... I'm not that much used to this  !
|
|
|
|
|
Hi,
I have created a com server using ATL as Windos NT service.
I also added an interface to the server i.e STA interface.Every thing works fine... The com server is maintaining a socket connection in a worker thread.
My problem starts like this... I have written a client application that uses the interface... When two clients are open no problem, if three clients are open no problem, then if i start closing each client one by one (in any order) then no problem. When i close the last client application along with the client ther service also terminates (it gets out of the message loop) and hence the socket connection. I want to maintain the socket connection even if no client is using the interface....
I am desperate for an answer as i could not find any solution.
Setup
1.visual C++, version 6.0
2.Project type ATL COM Service.
3.How it was executed the service? By clicking run button on the toolbar.
one more thing,
How do i make the service startup when windows boots?
My God is more powerfull Than Your God. (the line that divides the world)
|
|
|
|
|
Hi all
I wrote a pretty big MFC application. I have many frames and UI controls, I've changed the default message routing a bit. It works fine except one little problem: when i moving the mouse over its windows - the CPU jumps upto 100%. It happens as result of UPDATE_COMMAND_UI notifications.
Does anybody met such problem? know any utilities that can help to monitor the app and see what catches the CPU?
thanks.
|
|
|
|
|
Hi all. As I'm haveing problems with OLE DB database access, and I've tried everything that came to my mind to solve the problems, I would appreciate if someone gives me a sample of a working application (or a link where I can find it) so I can see what's I'm doing wrong. I have a .mdb that I really want to update, but I can't!! I can read it, i can insert a new record, but i can't update the record. I use ATL 7.1 without the attributed code, just plain wizard generated code plus additions.
Thanks in advance 
PS: I forgot to say that articles submited to CP didn't help much in discovering what's wrong, neither MSDN helped me.
"semper aliquid haeret", Bacon.
-- Sebastián.
|
|
|
|
|
This book could be of some help:
"Database programming with Visual C++ 6" by Lyn Robison, published by Sams.
|
|
|
|
|
Thanks, but I don't want a book, and seems a bit outdated. I just need some working code to see how it works.
"semper aliquid haeret", Bacon.
-- Sebastián.
|
|
|
|
|
I have had success with the Microsoft example OnlineAddressBook from the MSDN library (comes with Visual Studio .NET Enterprise). I believe you can download it off the msdn site as well. It shows record retrieval, update, delete etc...
|
|
|
|
|
I'm delving into WTL from MFC... it sounds great, and since MS has released 7.1 it could only get better, I hope.
However, I understand that it doesn't work as well with the IDE, and have seen similar problems myself. Perhaps you can clarify these for me?
- I'm using VC++ 2002. Does anyone see signifigant difference between VC2002/WTL7 and between VC2003/WTL7.1 in the area of working with the IDE?
- I've included the WTL\include directory as required, and all seems well. However, with some WTL classes, pressing F12 takes me to an afx___.h header versus a WTL header... among other name "conflicts" with MFC, or so it appears via the intellisense- compiles and runs OK though. The intellisense doesn't work quite right... it doesn't recognize WTL classes all of the time.
Any suggestions? From what I've seen, perhaps this is normal?
Thank you.  (And thanks Microsoft!)
|
|
|
|
|
Hi, I'm using WTL with VS 2003 and I don't have any problem. Be sure your stdafx.h includes only WTL/ATL stuff. Strip all afx***.h from it.
-- Sebastián.
|
|
|
|
|
Thanks, maybe the upgrade is worth a look.
|
|
|
|
|
Do not count too much on IDE, except creating a new project using a WTL wizard. Mostly you'd do everything by hand which is not that bad.
If you really get interested in WTL there is a wtl group hosted by Yahoo: http://groups.yahoo.com/group/wtl/[^].
Good luck,
Igor.
|
|
|
|
|
If the IDE detects BEGIN_MSG_MAP(class) in your class, you can automatically add window message handlers. It also detects if your class is dependent on a dialog resource (you can add event handlers from the dialog editor). And that's about it I guess. The intellisense support for WTL is very limited. Since many names in WTL is also present in MFC, the IDE will be fooled by this and show you MFC-versions of the intellisense data. But don't worry though, most of the time WTL is a reflection of MFC interface wise.
If intellisense is lying, there's always the header files which I find easily navigable.
I've never tried using WTL with the wtl:: namespace though. That might correct the intellisense problems.
--
Watcha' gonna do, when Hulkamania runs wild on you!?
|
|
|
|
|
Hi Geeks,
I have created a new COM server as a NT-service using ATL. I have added a new coclass, interface and method. It builds, and the service runs ok. When I instantiate the server from a client, it works. However, when I call QueryInterface on this object for my new interface, it returns E_NOINTERFACE. I have checked the ATL generated BEGIN_COM_MAP AND END_COM_MAP block, which does have my new interface in there.
Any suggestions will be appreciated.
Thanks.
|
|
|
|
|
Check the registry, see if your interface has been properly registered. Also look at the OLE/COM object viewer, it lists all interfaces.
Igor.
|
|
|
|
|
Ok now i have a wstring and other string, how do i convert between them...
any support for BSTR will also help me.
Is there veeeeeeeery good documentation on wstring and string...
MSDN is of little help.
thank you.
My God is more powerfull Than Your God. (the line that divides the world)
|
|
|
|
|
If you're using ATL (or even if you're not), use the ATL string conversion macros:
#include <atlbase.h>
#include <atlconv.h>
#include <string>
void this_is_your_function()
{
USES_CONVERSION;
std::string s = "whatever";
std::wstring ws = A2CW(s.c_str());
}
Alternatively (without using ATL), you can use the Win32 functions MultiByteToWideChar and WideCharToMultiByte to convert between ASCII and Unicode.
HTH
Stuart Dootson
'Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p'
|
|
|
|
|
Sometimes this is enough:
<br />
wstring w = L"This is a string";<br />
string s;<br />
copy (w.begin(), w.end(), back_inserter(s));<br />
<br />
string s1 = "This is another string";<br />
wstring w1;<br />
copy (s1.begin(), s1.end(), back_inserter(w1));<br />
<br />
|
|
|
|
|
|
Hello, how do I access the element which resides a vector of set. The codes are show below.
vector< set<int> > objSetVt;
set<int> objSet1;
objSet1.insert(2);
objSet1.insert(4);
objSet1.insert(2);
objSet1.insert(7);
set<int> objSet2(objSet1);
set<int> objSet3(objSet1);
objSetVt.push_back(objSet1);
objSetVt.push_back(objSet2);
objSetVt.push_back(objSet3);
vector< set<int> >::iterator objVtItr;
for(objVtItr = objSetVt.begin(); objVtItr < objSetVt.end(); objVtItr++)
{
//??? How to access the element now
//objVtItr[0][0] <-- this give compile error
}
Sonork 100.41263:Anthony_Yio
|
|
|
|
|
Anthony,
Unlike the vector class the set class does not have operator[]. A set is a sorted non-repeating collection, so you have to use the set's find() method.
In you particular case if you want to access the 7 of your set in the first vector you can use:
<br />
int iTest = *objSetVt[2].find(7);<br />
However if there is no 7 in the set the value of iTest will me meaningless. So You must always check:
<br />
set<int>::iterator it = objSetVt[0].find(7);<br />
if (it != objSetVt[0].end())<br />
int iTest = *objSetVt[0].find(7);<br />
Ivor S. Sargoytchev
Dundas Software
|
|
|
|
|
Does STL support unicode. if so how do i use it,
Certain functions like lstrcpy under unicode takes unsigned short* as input parameter in that case STL string failes.
Any idea bout it.
My God is more powerfull Than Your God. (the line that divides the world)
|
|
|
|
|
Try looking at std::wstring - that's an STL basic_string instantiated with wchar_t as the character type. There are also wchar_t streams as well.
And if 16 bits isn't wide enough, try using something like std::basic_string<unsigned long>.
And you can do something like
typedef std::basic_string<TCHAR> tstring;
to get a typedef that should work under ASCII or Unicode.
Stuart Dootson
'Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p'
|
|
|
|
|
Stuart Dootson wrote:
And if 16 bits isn't wide enough, try using something like std::basic_string<unsigned long="">.
But then you'd have to define character traits for unsigned long I reckon.
--
Sancte Míchael Archángele, defénde nos in proélio contra nequítiam et
insídias diáboli esto præsídium. Imperet illi Deus, súpplices deprecámur:
tuque, princeps milítiæ cæléstis, Sátanam aliósque spíritus malígnos, qui
ad perditiónem animárum pervagántur in mundo, divína virtúte,
In inférnum detrude. Amen.
|
|
|
|
|
I guess it might depend on what you're doing - the following code compiles & runs as expected under VC7.1:
#include <iostream>
#include <string>
int main(int,char**)
{
std::basic_string<unsigned long> ls;
std::basic_string<unsigned long> ls2;
ls.push_back('A');
ls2 = ls;
ls += ls2;
ls += ls;
ls += ls;
std::cout << ls.length() << std::endl;
}
There's a default implementation of char_traits in iosfwd.
Stuart Dootson
'Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p'
|
|
|
|
|
yes, but it's only defined for char and wchar_t, is it not?
--
Watcha' gonna do, when Hulkamania runs wild on you!?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
