|
When I re-installed everything I always copied my Outlook Express data files with Explorer, then re-installed everything, ran OE once (to get the Identities folder created) and then put the old files in place again.
This always worked fine. I just don't know about the renaming thing you want to do. Using the import wizard will cause less trouble, but I suggest you rename and copy one file to see if it's working, then do all the rest because putting the data back this way will be faster.
greetz
*Niels Penneman*
Software/Dev Site Personal Site
|
|
|
|
|
Thanks!
"Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A.
|
|
|
|
|
Once i used GFlags.exe to enable win32 debugging my system not restarting. It hangs before the restart is complete. ie, blue screen for hours.., 4 hours passed when i am writing this message.
|
|
|
|
|
Do you have win XP/2003? Try last working configuation or put one back with the recovery console...
greetz
*Niels Penneman*
Software/Dev Site Personal Site
|
|
|
|
|
"The caption buttons for close, restore, minimize, scroll up & scroll down have some problem. They don't look like standard buttons. These all buttons are shown with some nos. eg. 4, 5, 3, 9..... and so on. This happens to all the open windows in computer.
In total if we can say that the five buttons have lost their standard symbols and appears with some garbage number for all opened windows.
The appearance in display properties is set to windows standard as well as there are not corrupted font in windows system. Win.ini and System.ini is also properly checked and there is no any problem found in the same."
|
|
|
|
|
Check free system resources and ... the Marlett font (which is mostly hidden but not difficult to find IF you still have it)
greetz
*Niels Penneman*
Software/Dev Site Personal Site
|
|
|
|
|
I've been googling all day long trying to find a novell client for Redhat. I stumbled on the NovelClient, but that keeps giving me errors, and i haven't gotten a response from anyone yet on the forums.
Does anyone out there know of a descent Novel Client they've used in linux? All im looking to do is copy some files over onto a mounted drive here in linux from novel.
*.*
cin >> knowledge;
|
|
|
|
|
Would this[^] be of any help? Once you're done, you can uninstall it - it is a beta version, after all.
"Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A.
|
|
|
|
|
well, i noticed that, but the 249MB download size turned me off, as im on lowly dsl here at work. Plus, thats got a whole lotta extra baggage. I suppose i could let it download overnight...
i think i was looking more for something on the simpler side, heh, but i suppose this will have to do.
*.*
cin >> knowledge;
|
|
|
|
|
Hi all,
I have a problem in my system and i don't know how to solve it, i have a server where i have installed a win 2000 advanced server and have defined there a domain on an active directory and many users,
when i line to loge in from some computers on the network i have a problem, it takes very long time to log in to the domain it is about 2 to 3 minutes
so if anybody know how to solve this problem could you pleas tell me what to do
Regards
Mhmoud Rawas
------------
Software Eng.
|
|
|
|
|
Hi,
is this problem only from some computers or from many?
which network connection do you have (Shared,Switched,Routed)?
is the server in the same subnet as the clients with the problem?
have you many logon scripts running?
is this with all users or some accounts?
have you server based profiles? might be corupted?
is the problem reproduce able wenn the workstation is rebooted/ runs some time/you log off and log on again?
does the name resolution goes well? might be wins?
HtH
regards
Patrick
|
|
|
|
|
--is this problem only from some computers or from many?
this problem is from some computers
--which network connection do you have (Shared,Switched,Routed)?
Switched
--is the server in the same subnet as the clients with the problem?
yes they are all at the same subnetmask
--have you many logon scripts running?
NO
--is this with all users or some accounts?
all users have the same problem from some machines
--have you server based profiles? might be corupted?
i have check them abut every this right
--is the problem reproduce able wenn the workstation is rebooted/ runs some
time/you log off and log on again?
NO, i have the problem every time i log out and log in again
--does the name resolution goes well? might be wins?
all the name resolution is correct
i will be thannkfull for your help if you can solve this problem
Mhmoud Rawas
------------
Software Eng.
|
|
|
|
|
The problem only occurs with some computers on your network. I'd go and check these machines first instead of thinking there's something wrong with your server...
greetz
*Niels Penneman*
Software/Dev Site Personal Site
|
|
|
|
|
mhmoud rawas wrote:
all the name resolution is correct
Are the clients using the PDC as DNS server?
XP clients need to use the PDC for DNS otherwise you will get the symptom you described.
Configure the server DNS as a forwarder and then add your zone as AD integrated.
Atleast this worked at our shop for the same type of problem.
(W2K client -> W2K server never had any problem though.)
And if the paths that I have followed/have tread against the flow/there is no need for sorrow
I am coming home
Return, Crüxshadows
|
|
|
|
|
An Octet is basically the same as a Byte, right?
/\ |_ E X E GG
|
|
|
|
|
Yes. Some deviants in the past have attempted to define a byte as something other than 8 bits, but octet says it all rather concisely.
"Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A.
|
|
|
|
|
Alright, cool. That's what I thought. thanks.
/\ |_ E X E GG
|
|
|
|
|
So, i'm here reading this POP3 RFC. It says that if your email server dosn't return a timestamp in it's greeting it dosn't support Authentication.
EXAMPLE TIMESTAMP:
<1896.697170952@dbc.mtview.ca.us>
That just dosn't sound right. Wouldn't Verizon (incoming.verizon.net) support authenitication? What's going on?
/\ |_ E X E GG
|
|
|
|
|
I guess if I wanted secure authentication I would use SSL. Is that what Outlook uses?
/\ |_ E X E GG
|
|
|
|
|
hi,
i want to perform any File IO operations thru asp.net. The file access code works fine in Windows Application but does not work in Asp.net.
Can anyone help out
the code is as below
Directory.CreateDirectory("//ServerName/D/PPP") working in vb .net windows application
Directory.CreateDirectory("V:/bbb") by mapping the drive on the server
Directory.CreateDirectory("\\IP Address of Server\d\temp\ppp") ' By Writing the IP Address of the Server
Error : Could not find a part of the path "\\188.199.250.35\D".
thx.
Be Humble in Victory and Strong in Defeat. -Het
|
|
|
|
|
Why you don't use MapPath()??
----
hxxbin
|
|
|
|
|
It all seems so simple when I read this[^] article, but when I attempt to imlement the instructions I find that the screens mentioned don't match what I see.
My computer is a standalone XP box connected to a small home network using Workgroups and not a Domain.
I find no Advanced tab or Secure Logon section of User Accounts as mentioned by the article. What I do see is Change the way users log on or off option with Use the Welcome screen as the only viable option.
Anyone know how I can force Ctrl+Alt+Del as a requirement to reaching the logon screen on my standalone box?
Michael Martin
Australia
"I suspect I will be impressed though, I am easy."
- Paul Watson 21/09/2003
|
|
|
|
|
Are you using the simplified file sharing method for security? I've found that this changes the behavior of XP badly, and it's the default setting. If so, disable it and force everyone to use passwords. That might restore the screens you should expect from this article's descriptions. If you already use the traditional username/password logon, then I haven't a clue - maybe a service pack since the article was written has changed something. I have yet to see a XP machine that uses this logon box, though, so it probably isn't something easy to change.
"Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A.
|
|
|
|
|
Roger Wright wrote:
Are you using the simplified file sharing method for security? I've found that this changes the behavior of XP badly, and it's the default setting. If so, disable it and force everyone to use passwords. That might restore the screens you should expect from this article's descriptions.
First two things I change on every XP box I touch, doubly so for my own machines. Still not doing as I expect.
Roger Wright wrote:
If you already use the traditional username/password logon, then I haven't a clue - maybe a service pack since the article was written has changed something. I have yet to see a XP machine that uses this logon box, though, so it probably isn't something easy to change.
To change it so the user id/password box is used is as follows.
Control Panel -> User Accounts -> Change the way users log on or off -> Uncheck Use the Welcome screen
It seems that when I connect an XP machine setup this way to a domain the Ctrl+Alt+Del feature appears. Haven't done it for a few months so am not completely sure my memory serves me well and of course no domain handy to test this on.
Michael Martin
Australia
"I suspect I will be impressed though, I am easy."
- Paul Watson 21/09/2003
|
|
|
|
|
The docs I have refer to it explicitly as something that's added when connecting to a domain, but never mention it when discussing a Workgroup. It may be that this is simply not available unless you're part of a domain.
"Another day done - All targets met; all systems fully operational; all customers satisfied; all staff keen and well motivated; all pigs fed and ready to fly" - Jennie A.
|
|
|
|