|
I have tried to update VS.NET Enterprise Architect online and i got the message that that my version was the last one. And with all these I can't open the *.sln or *.csproj file.
|
|
|
|
|
First things first, What's the error message?
Second, you CAN, in the Enterprise Architect version, open a project, or any other file, written by the Professional version. But, you CAN'T open a project written in any edition of VS.NET 2003 in VS.NET 2002.
So my questions will be a repeat of the first reply you got...
Which verion of Visual Studio.NET Professional Edition was the project written in, 2002 or 2003?
Which version of Visual Studio.NET Enterprise Edition are you trying to open the project in, 2002 or 2003?
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
The version of my VS.NET is 2002 and the files are downloaded from MS website, so I don't know with what version the files were written. So my question is how can I open the files?
|
|
|
|
|
OK. Last time! WHAT IS THE ERROR?
All you do is double click the .sln or .csproj file. That's it! There is no special trick to getting files to open. If the files were created in VS.NET 2003, you can download and compile this[^] little conversion tool so you can open the project files. THIS IN NO WAY SAYS THAT THE PROJECT IS GOING TO COMPILE WHEN YOU GET IT OPEN!
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
the error message told me that the files were made in the professional version of VS.NET and i couldn't open them with the version i had (Enterprise Architect). I'll try this utility you tell me about and i'll let you know what happens!
thanks a lot!
|
|
|
|
|
the project converter that Dave told me about works fine.
|
|
|
|
|
Hi,
I want the all the nodes in the tree to be expanded. How do I set this property?
Karteek
|
|
|
|
|
 Simply call the ExpandAll() method of the TreeView control:
TreeView1.ExpandAll()
I have to ask, have you ever read the documentation on the TreeView and Datagrid controls? Or have even looked through the Intellisense dropdown when you hit "."?
And what's with the "regd" with every question you post?
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Agreed. This forum is for specific questions. You'll never learn anything if you don't actually try to research things - even basic research such as reading the class documentation - if you expect everyone to do the work for you.
I'm a bit confused by "regd" as well. It isn't necessary.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Hi,
Actually I have to complete the a project within the next two weeks. It is a big one and I donno much abt C# and .Net. So I post it so that I get the answer without wasting much time. regd I mean regarding. Sorry if I distrubed u with my posts.
Karteek
|
|
|
|
|
Putting "regarding", "re", or "regd" in a subject is pointless: obviously your post relates to whatever the subject says - that's what a subject is for.
It doesn't matter how much time you have to do a project. Not reading about what you're doing is counter-productive and no very smart. You should just jump into something - especially for an important project - without having any idea of what you're doing.
Besides, while your developing your project you should be reading about what you're doing. Not only will you learn while you develop your project, reading may help to make your project better by either providing you with alternative means to perform some task or to make your project more stable.
There's simply no valid excuse why someone can't read even something as simple and quick as class library documentation, at least for the classes the person is using. None.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
karteek wrote:
I donno much abt C# and .Net. So I post it so that I get the answer without wasting much time.
Actually, posting your question and waiting for an answer will take more time than reading the class documentation. It would have taken you about 2 minutes to find the answer to this one just reading the class documentation on the TreeView control.
...and you probably would have learned something else in the process too...
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
hello, i get this error-> System.Data.SqlClient.SqlException: Login failed for user 'xxx\ASPNET'
do some one knows how to solve it?
i am new to sql and i use msde.
thank u in advance
|
|
|
|
|
You basically have three options:
1) Get some SQL Server management tools, and set up login/user permissions in the SQL Server / Database for the ASPNET user.
2) Same as above, but create a separate SQL Login account, and don't use trusted connections to the database.
3) Add the ASPNET user to the Administrators group. This, however, is not at all secure, and can have very serious side-effects.
Grim (aka Toby) MCDBA, MCSD, MCP+SB
|
|
|
|
|
It sounds like your connection string is setup using Integrated Security. Avoid this and use a dedicated username and password for SQL access. You'll also have to setup that username and password for the database using SQLManager.
RageInTheMachine9532
"...a pungent, gastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Can anybody please help me with dropdownlist.
it must be very simple ... I have this dropdown list which returns me only 1st record .. no matter what i select.
I m using drodownlist1.seletedItem.text to see the value and it's always showing me that i have selected 1st record.
Thanks
|
|
|
|
|
Can you post a bit more of your code so we can see exactly what you are doing?
Pankaj
Without struggle, there is no progress
|
|
|
|
|
Hey Lads,
I'm have a problem here that has me confuddled.. Maybe it's something stupid but I'd appreciate any suggestions.
I have a simple class that contains some strings and an int or two. Lets call it BasicClass. Now I have an ArrayList that contains a few BasicClass objects.
I'm serializing that ArrayList (Binary serialization) into a memory stream. From the memory stream I'm pulling out the underlying byte[] which I am storing in a database.
Now, when I retrieve the data from the database (as a byte array) I create a memory stream containing the byte[]... I deserialise the contents of the byte[] to give me a lovely ArrayList....
Great.. everything works.. to here.
When I try to get at the contents of the ArrayList and cast them back to BasicClass objects I get an InvalidCastException (if I don't use safe casting)...
When debugging I can clearly see that the ArrayList, after being deserialized from the database etc, contains x number of object's and each of those are of type BasicClass (or so the debugger says)... but I can't cast them back to BasicClass objects.... I call GetType() on the objects in the deserialized ArrayList and then when looking at the Type.FullName property it tells me that the object is of type BasicType.... grrrrr!!! .... If it is then why the hell can I not cast it to a BasicClass object.
I also tried the exact same using xml serialization and it gives the exact same problem.
Oh, and BasicClass is serializable, as is the ArrayList class.
Any help would be greatly greatly appreciated lads. I need this sorted ASAP.
Regards,
Brian Dela 
http://www.briandela.com IE 6 required.
http://www.briandela.com/pictures Now with a pictures section 
http://www.briandela.com/rss/newsrss.xml RSS Feed
|
|
|
|
|
I'm just curious why you're serializing the ArrayList to a MemoryStream to bet the byte[] instead of just serializing the whole shabang?
In any case, it I would venture a guess that for some strange reason, the BasicClass Type is not the same. Remember that a Type consists of the fully-qualified class name (i.e., includes the namespace), the assembly, the version, the culture and public key token). One cause of this is that perhaps you're using automatic versioning with your assembly, so that the old and new BasicClass Types differ by version. If that's true - there's your problem.
There's two ways to solve this: don't use automatic version (so little control and real pain in the arse with larger solutions, especially when you use late-binding like for plug-ins and what-not) or derive your own SerializationBinder and override BindToType. You can make this implementation generic so that the version number is basically ignored, as I did here:
public override Type BindToType(string assemblyName, string typeName)
{
string name = assemblyName.Substring(0, assemblyName.IndexOf(','));
Type t = Type.GetType(typeName + ", " + name);
return t;
}
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Heath Stewart wrote:
I'm just curious why you're serializing the ArrayList to a MemoryStream to bet the byte[] instead of just serializing the whole shabang?
What do you mean?
Heath Stewart wrote:
In any case, it I would venture a guess that for some strange reason, the BasicClass Type is not the same. Remember that a Type consists of the fully-qualified class name (i.e., includes the namespace), the assembly, the version, the culture and public key token). One cause of this is that perhaps you're using automatic versioning with your assembly, so that the old and new BasicClass Types differ by version. If that's true - there's your problem.
I though that was the problem myself (I had the same issure in the past) so I disabled the automatic versioning, wiped clear any objects stored in the DB, and started again, to see if it was the issue but it didn't make any difference at all.
Regards,
Brian Dela
http://www.briandela.com IE 6 required.
http://www.briandela.com/pictures Now with a pictures section
http://www.briandela.com/rss/newsrss.xml RSS Feed
|
|
|
|
|
Brian Delahunty wrote:
What do you mean?
Why don't you just serialize the entire object graph? Serialize your class's members, include the ArrayList. The runtime serialization framework will serialize the ArrayList, which will serialize BasicClass. Then you just take all that and save it in the DB.
Brian Delahunty wrote:
I though that was the problem myself (I had the same issure in the past) so I disabled the automatic versioning, wiped clear any objects stored in the DB, and started again, to see if it was the issue but it didn't make any difference at all.
The InvalidCastException you're getting indicates that the classes are indeed not the same. I would check with the debugger to find out the full Type of the object and compare with what it should be.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
Heath Stewart wrote:
Why don't you just serialize the entire object graph?
Ah, K. Nah.. just want the arraylist. I don't need to serialise anything else in that class so I don't see the point.
I go tthe problem fixed. Was to do with the fact that, now I think this fixed it, one version of the assembly was signed and the other wasn't even though they both had the same version number. I think that's what it was. I done a load messng with it but it worked in the end.
Regards,
Brian Dela
http://www.briandela.com IE 6 required.
http://www.briandela.com/pictures Now with a pictures section
http://www.briandela.com/rss/newsrss.xml RSS Feed
|
|
|
|
|
The version number doesn't matter so long as the version does change between Types. The fact that one assembly wasn't signed could be a problem, although you should've gotten an error or at least a warning. A signed assembly cannot use an unsigned assembly, though the reverse is possible.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
|
|
Haven't in a long time. Just really don't have the time.
Microsoft MVP, Visual C#
My Articles
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
