|
Khanh Trinh wrote:
I wonder if we can set font for all Windows on screen...
Why would you want to do this? Unless an application needs a specific font, it should use the font that the user has established via control panel. Going against user settings is highly frowned upon. Further, no application should change the font used by another application.
"When I was born I was so surprised that I didn't talk for a year and a half." - Gracie Allen
|
|
|
|
|
This is a special case, when the packaged software should use Windows default setting Fonts (include font and charset), however it does not. So in order to display correctly, I must do change font for that particular application.
Any idea in this case? I can change font for Buttons, Listbox, ComboBox, Textbox. But it seem the Editcontrol (Read-only), the Tab-label cannot be changed.
Thanks
|
|
|
|
|
Khanh Trinh wrote:
I can change font for Buttons, Listbox, ComboBox, Textbox. But it seem the Editcontrol
Strictly speaking, text box is a VB term, while VC++ uses the term edit control. Anyway, you've used both terms here, but apparently not interchangeably.
Khanh Trinh wrote:
But it seem the Editcontrol (Read-only), the Tab-label cannot be changed.
Are you talking about two different controls here? What is a "Tab-label?"
I'm not sure how you are changing the font of the other controls, but I use SetFont() when dealing with edit controls.
"When I was born I was so surprised that I didn't talk for a year and a half." - Gracie Allen
|
|
|
|
|
you right about the terms. Actually, what I want is changing font of a combined application (another application) and I don't have that code. That's why I must set a Hook on WM_PAINT (not sure this message is correct or should capture another one), then do SendMessage with WM_SETFONT to set Font for that control.
Tab-label: I mean, the pages' caption of tab-control (sorry about incorrect terms)
So, with that I have dont, I can change font for most controls except somes indicated before.
|
|
|
|
|
I started an exe using createProcess and want to check on it:
while(1)
{
LPDWORD lpExitCode;
GetExitCodeProcess(ProcessInfo.hProcess, lpExitCode);
etc
}
I see in the debug that the hProcess isnt null (since my process started successfully). I was going to exit the process and see if I could detect it in my launching app. However, the code crashes at GetExitCodeProcess. I tried stepping into it, but it access violates immediately. What can I look into to see what is wrong?
As a workaround I am doing
while( ! (WaitForSingleObject(ProcessInfo.hProcess,1) == WAIT_OBJECT_0))
but I am curious as to why the first call crashes.
thanks,
sb
|
|
|
|
|
Should be:
DWORD dwExitCode;
GetExitCodeProcess(ProcessInfo.hProcess, &dwExitCode);
"When I was born I was so surprised that I didn't talk for a year and a half." - Gracie Allen
|
|
|
|
|
ns wrote:
As a workaround I am doing
That's not a workaround... That's the way it should be done David's solution will fix the first call.
Ryan "Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"
|
|
|
|
|
hello,
Does anybody know how to fix the error that I sometimes get with my application: the error is the nb 995 with the GetLasterror() function, and it says in the help:"when a I/0 operation is interrupted". My application is almost like a ping on a serial link of a PC to a special device: it writes a byte and then read the serial link to see if an answer is coming. It waits around 10 ms, and if nothing is arrived, it tries again. But sometimes, the fonction that reads the file that stores incoming data returns with this error 995. It can not happen a hundred times, but the one time it happens, it blocks everything(I mean my application cannot write/read on the serial link anymore), even if I exit from the application and come back it will happen again until I reboot my PC, and then everything is back to normal.
Please, HEEEELPPPPP!!!!
sojijolan
|
|
|
|
|
check out MSDN.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnfiles/html/msdn_serial.asp
Kuphryn
|
|
|
|
|
Please help me.
I whant set colot of line, in the CListCtrl, how can i do this?
But i dont whant use XListCtrl.
|
|
|
|
|
One way to accomplish this is to subclass the list control and handle WM_DRAWITEM . Set the text color of the hDC passed to the handler (as part of the DRAWITEMSTRUCT structure). For example:
void CMyListCtrl::DrawItem
(LPDRAWITEMSTRUCT lpDrawItemStruct)
{
ASSERT (NULL != lpDrawItemStruct);
COLORREF rgbText = RGB (255, 0, 0);
VERIFY (CLR_INVALID != ::SetTextColor (lpDrawItemStruct->hDC, rgbText));
::DrawText (lpDrawItemStruct->hDC, ...);
} But a more flexible solution (imho) would be to use custom drawing. See this[^] article.
/ravi
My new year's resolution: 2048 x 1536
Home | Articles | Freeware | Music
ravib@ravib.com
|
|
|
|
|
Can someone tell me why this code will not compile?
#include<vector>
class Pair{
public:
int a,b,count;
public:
Pair();
Pair(Pair& pP);
Pair(int pA,int pB,int pCt=1);
Pair& operator =(Pair& pP);
bool operator ==(Pair pP);
void operator ++(){++count;}
};
Pair::Pair(){a=b=count=0;}
Pair::Pair(Pair& pP){
a = pP.a;
b = pP.b;
count = pP.count;
}
Pair::Pair(int pA,int pB,int pCt){
a = pA;
b = pB;
count = pCt;
}
Pair& Pair::operator =(Pair& pP){
a=pP.a;b=pP.b;count=pP.count;return *this;
}
bool Pair::operator ==(Pair pP){
return (((a==pP.a)||(a==pP.b))&&(b==pP.a||b==pP.b));
}
template <class t="">
class VSet : public std::vector<t>{
public:
void add(T pT);
};
template <class t="">
void VSet<t>::add(T pT){
iterator i = begin();
while (i != end()){
if((*i)==pT){++(*i);return;}
++i;
}
push_back(pT);
}
void TestFunct(VSet<pair> *pV){
Pair P(1,2);
pV->add(P);
}
The line : push_back(pT)
seems to be the problem, if I comment it out it compiles fine.
I am using VCC 6.0
The 2 errors I get are :
error C2679: binary '=' : no operator defined which takes a right-hand operand of type 'const class Pair' (or there is no acceptable conversion)
and
error C2558: class 'Pair' : no copy constructor available
Any help would be greatly appreciated.
|
|
|
|
|
You need to define a copy constructor and overload the '=' operator, like it says. This is because implicit in your passing of arguments, a copy contructor is triggered. You can avoid this by passing arguments by reference - Add(T &pT) for example.
You should also be aware that if you are deriving a class from an STL container - it lacks virtual destructors, so you can never cast it back to the base class without problems.
|
|
|
|
|
Okay, but he did have a copy constructor and assignment operator in the pair class. Even though they were not const references, I've seen C++ books that did not use const references for those two types of functions. Was there a C++ standards change that requires const inputs to copy constructors and assignment operators? Or perhaps is the book incorrect?
The push_back always takes a copy and that was the original problem. The push_back, by definition will make a copy of the object and place the copy within the vector so you can not avoid that problem using a reference since push_back is already defined in the existing std::vector class. So the copy constructor is absolutely necessary for the pair class; no question.
|
|
|
|
|
digwizfox wrote:
I've seen C++ books that did not use const references for those two types of functions. Was there a C++ standards change that requires const inputs to copy constructors and assignment operators? Or perhaps is the book incorrect?
There is nothing in the standard, but assignment operators and copy constructors should not modify their parameters, so therefore they should be specified as const. Any parameter that is not modified should be const.
Ryan "Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"
|
|
|
|
|
Something looks peculiar in your template class declaration. Vector is a template class. So you are specializing a template class. Shouldn't it be something like this?
template class <class t=""> VSet : public std::vector<class t="">
{
public:
void add(T pT);
};
That is how the examples that I have seen work. When you declar a template class, you have to put the generic type variable within <>. Also, the code that instantiates the vector (which I do not see in your example) will need to #include "pair.h" and instantiate the vector like below.
//Program needs to see the declaration of pair
#include "Pair.h"
#include "VSet.h"
//Instaniate the vector specialization
VSet<pair> p;
//Call the test function
TestFunc(&p);
Try something like that. If you have an STL book, search for some code examples using vectors so that you can see what I mean about declaring and instantiating a template class. I don't think your class declaration is correct.
I hope that will work for you but I haven't tested it. That information is basically right out of my C++ books. Obviously, the compiler doesn't know what a pair is so it can't know about the copy constructor and assignment operator. Also, you need the < class T > after the word template in your function definition as well. Try playing around with that and see if it works.
|
|
|
|
|
That's an HTML problem not a code problem - he cut and paste it without checking the "Do not treat <'s as HTML tags" below the textbox
-----------------------------
All truth passes through 3 stages.
First, it is ridiculed.
Second, it is violently opposed.
Third, it is accepted as being self-evident.
|
|
|
|
|
Oh now I see. Now that I read my own post, apparently the brackets are stripped out making the template parameters not show up. That is probably why the original post did not have them. Is that true beer belly?
So my post looked the same as yours because it did the same to me? So how do I get the " < text > " start and end brackets to show up in a post?
|
|
|
|
|
a) please post code in <pre> tags, and use the "Do not treat <'s as HTML tags" checkbox (or use < and > for < / > )
b) Assignment operator and copy constructor take an argument of type T const &
we are here to help each other get through this thing, whatever it is Vonnegut jr.
sighist || Agile Programming | doxygen
|
|
|
|
|
Sorry about that. This is what it should look like.
template <class T>
class VSet : public std::vector<T>{
public:
void add(T pT);
};
template <class T>
void VSet<T>::add(T pT){
iterator i = begin();
while (i != end()){
if((*i)==pT){++(*i);return;}
++i;
}
push_back(pT);
}
|
|
|
|
|
Hi all... I want to know how to start with c++.. from the a to the z
I mean not only the dos commands, but also the MFC.. so simply how to get start from 0 until to be a prof.
thanks : )
|
|
|
|
|
you gonna have to start with a GOOD LUCK !
depends on what you know right now ? you know nada in c langage ?
what other langage you know ?
and why you want to know it ? what kind of prof you wanna be, etc....
c is in some way a hard langage, you better start with C than c++, and learn a little bit with a little bit.
Do you have knowledge in Object Oriented coding ?
|
|
|
|
|
I suggest you either enroll in a programming class, or go to a bookstore and buy beginners level books.
You can find books with CD included that will make life easier at the beginning.
Maximilien Lincourt
Your Head A Splode - Strong Bad
|
|
|
|
|
OKI DOKI..
I know the website design language.. such like java script and html and php and so on... I don't have any background with c... and I have been told that there is no need to study it.. but I have studied the basic codes of c++ that i run it under dos... like cout and cin and + / * and so on... so my uqestion is when i finish this start level... what should I do after that?
|
|
|
|
|
Programming languages (like C, C++, Java and C#) are merely tools, and therefore a means to an end. The right approach (imho) is to take a few basic CS courses (data structures, algorithm design, object oriented programming, Windows (i.e. event driven) programming, to name a few) and learn C/C++ along the way.
Think of it as the difference between the tools (the languages) and knowing how to use them. It's easy enough to learn how to use a saw, chisel, hammer and screwdriver, but that's not enough to become a master carpenter. You have to know the ins and outs of woodworking (in other words CS) to achieve that goal.
You seem to have the enthusiasm required to embark on this venture. Good luck! It can be insanely rewarding!
/ravi
My new year's resolution: 2048 x 1536
Home | Articles | Freeware | Music
ravib@ravib.com
|
|
|
|