|
pipes
Ninety-eight percent of the thrill comes from knowing that the thing you designed works, and works almost the way you expected it would. If that happens, part of you is in that machine.
|
|
|
|
|
Depends on the future possibilies vs the current budget.
If time and money is unlimited you designed a plug in architecture so you can change backends at well.
If portability is a concern, pipes are the easiest to port system to system. Just be careful to use only the most brain dead one-way pipes. 
If the same box, or the no multiple users requirement might be relaxed latter, then you should consider network sockets because they are more easially extended.
Note, the above assumes the apps are already mostly done. If you are in the early design stages, then php (or .asp) is the way to go. Web browsers are pretty good database front ends, and (unless you do something stupid) allow the user to choose what platform to run on. This system also gives you, for almost free, things like security that you really should be considering, but is too complex for most people to bother with until it is too late.
|
|
|
|
|
I'm trying to let a user modify text in a CEdit control and remove the CEdit control when the user moves the focus and represent the text during the OnDraw with DrawText.
The technique works when using a fixed width font such as "Courier New" but when I try using a variable width font like "Arial", the CEdit likes to represent the text shifted to the right just a tad bit. This shift make the text appear to move when focus transitions occur.
One observation on a somewhat related note...
GetTextExtent returns the size of the text without the offset. If I resize the CEdit to what GetTextExtent gives me, the text does not fit with variable width fonts but fits just fine with fixed width fonts.
Does anyone know what this offset on the left side of the text is and why it doesn't happen using a fixed width font and what I can do to work around it?
Thanks,
Bob
|
|
|
|
|
Well, I came across an article that mentioned the
CEdit::SetMargins
and tried using this to set margins to zero and it fixed the problem.
|
|
|
|
|
Hi,
I am trying to create a Windows Application that uses the HTMLHelp API to launch a help file.(.CHM file). But am not able to associate the windows created by HtmlHelp(..) command to the message queue. It's not entering into the WindowsProcedure associated with that Application though I followed the HtmlHelp documentation. Please find the .cpp file attached. I feel am going wrong somewhere. Please help me out.
Very urgent help needed.
thanks in advance,
//////
Code: (windows application project type); include htmlhelp.lib
/////
/////////////////////////////////////////////////////////////////////////
// helpsysfinalwinapp.cpp : Defines the entry point for the application.
/////////////////////////////////////////////////////////////////////////
#include "stdafx.h"
#include "resource.h"
#include "stdio.h"
#include "windows.h"
#include "Htmlhelp.h"
#include "conio.h"
#include "stdlib.h"
#define MAX_LOADSTRING 100
#define ID_NOTIFICATION 4242
// Global Variables:
HINSTANCE hInst;
TCHAR szTitle[MAX_LOADSTRING]; // The title bar text
TCHAR szWindowClass[MAX_LOADSTRING];
HWND HwndDlg;
DWORD dwCookie = NULL;
// Foward declarations of functions included in this code module:
ATOM MyRegisterClass(HINSTANCE hInstance);
BOOL InitInstance(HINSTANCE, int);
LRESULT CALLBACK WndProc(HWND, UINT, WPARAM, LPARAM);
LRESULT CALLBACK About(HWND, UINT, WPARAM, LPARAM);
int APIENTRY WinMain(HINSTANCE hInstance,
HINSTANCE hPrevInstance,
LPSTR lpCmdLine,
int nCmdShow)
{
// TODO: Place code here.
MSG msg;
bool bvRetVal;
HACCEL hAccelTable;
nCmdShow=SW_MAXIMIZE;
HtmlHelp(NULL,NULL,HH_INITIALIZE,(DWORD)&dwCookie) ;
LoadString(hInstance, IDS_APP_TITLE, szTitle, MAX_LOADSTRING);
LoadString(hInstance, IDC_HELPSYSFINALWINAPP, szWindowClass, MAX_LOADSTRING);
MyRegisterClass(hInstance);
// Perform application initialization:
if (!InitInstance (hInstance, nCmdShow))
{
return FALSE;
}
// msg.hwnd=HwndDlg;
//hAccelTable = LoadAccelerators(hInstance, (LPCTSTR)IDC_HELPSYSFINALWINAPP);
while (GetMessage (&msg, NULL, 0, 0)) //Retrieve a message from the
{
//calling thread's message queue
if (!HtmlHelp (
NULL,
NULL,
HH_PRETRANSLATEMESSAGE,
(unsigned long)&msg))
{
TranslateMessage (&msg);
DispatchMessage (&msg);
}
}
HtmlHelp(NULL, NULL, HH_UNINITIALIZE, (DWORD)dwCookie) ;
return msg.wParam;
}
////////////////////////////////////////////////////////////////////////////////////////
//
// FUNCTION: MyRegisterClass()
//
// PURPOSE: Registers the window class.
//
// COMMENTS:
//
// This function and its usage is only necessary if you want this code
// to be compatible with Win32 systems prior to the 'RegisterClassEx'
// function that was added to Windows 95. It is important to call this function
// so that the application will get 'well formed' small icons associated
// with it.
///////////////////////////////////////////////////////////////////////////////////////
ATOM MyRegisterClass(HINSTANCE hInstance)
{
WNDCLASSEX wcex;
wcex.cbSize = sizeof(WNDCLASSEX);
wcex.style = CS_HREDRAW | CS_VREDRAW;
wcex.lpfnWndProc = (WNDPROC)WndProc;
wcex.cbClsExtra = 0;
wcex.cbWndExtra = 0;
wcex.hInstance = hInstance;
wcex.hIcon = LoadIcon(hInstance, (LPCTSTR)IDI_HELPSYSFINALWINAPP);
wcex.hCursor = LoadCursor(NULL, IDC_ARROW);
wcex.hbrBackground = (HBRUSH)(COLOR_WINDOW+1);
wcex.lpszMenuName = (LPCSTR)IDC_HELPSYSFINALWINAPP;
wcex.lpszClassName = szWindowClass;
wcex.hIconSm = LoadIcon(wcex.hInstance, (LPCTSTR)IDI_SMALL);
return RegisterClassEx(&wcex);
}
///////////////////////////////////////////////////////////////////////////
// FUNCTION: InitInstance(HANDLE, int)
//
// PURPOSE: Saves instance handle and creates main window
//
// COMMENTS:
//
// In this function, we save the instance handle in a global variable and
// create and display the main program window.
////////////////////////////////////////////////////////////////////////////
BOOL InitInstance(HINSTANCE hInstance, int nCmdShow)
{
LPCSTR pszFile = "C:\\Langref.chm";
LPCSTR pszWin = "C:\\Langref.chm>test";
// get the wintype
HH_WINTYPE m_hhWinType;
hInst = hInstance; // Store instance handle in our global variable
HwndDlg=GetDesktopWindow();
ZeroMemory(&m_hhWinType, sizeof(HH_WINTYPE));
//HtmlHelp(HwndDlg, pszWin, HH_GET_WIN_TYPE, (DWORD) &pwt);
// copy contents of returned wintype
//m_hhWinTyp = *pwt;
m_hhWinType.hwndCaller=HwndDlg;
m_hhWinType.fsWinProperties = HHWIN_PROP_TRI_PANE |
HHWIN_PROP_AUTO_SYNC|HHWIN_PROP_TRACKING |HHWIN_PROP_ONTOP|HHWIN_PROP_NODEF_STYLES;
m_hhWinType.fsToolBarFlags = HHWIN_BUTTON_BACK |
HHWIN_BUTTON_HOME | HHWIN_BUTTON_FORWARD |
HHWIN_BUTTON_EXPAND;
// Indicate which fields in structure are valid.
m_hhWinType.fsValidMembers = HHWIN_PARAM_STYLES |
HHWIN_PARAM_PROPERTIES | HHWIN_PARAM_RECT |
HHWIN_PARAM_TB_FLAGS | HHWIN_PARAM_NAV_WIDTH |
HHWIN_PARAM_SHOWSTATE | HHWIN_PARAM_TABPOS |
HHWIN_PARAM_CUR_TAB|HHWIN_PROP_POST_QUIT;
m_hhWinType.iNavWidth = 175;
// Initial display state:
// NOTE: fsValidMembers - HHWIN_PARAM_SHOWSTATE must be set.
m_hhWinType.nShowState = SW_RESTORE;
// TOC should be activated.
// NOTE: fsValidMembers - HHWIN PARAM_CUR_TAB must be set.
m_hhWinType.curNavType = HHWIN_NAVTYPE_TOC;
// Tabs on top.
// NOTE: fsValidMembers - HHWIN_PARAM_TABPOS must be set.
m_hhWinType.tabpos = HHWIN_NAVTAB_TOP;
m_hhWinType.pszCaption= "TEST";
// set notification id
m_hhWinType.idNotify = ID_NOTIFICATION;
// rememeber to force the correct size
m_hhWinType.pszType = "test";
m_hhWinType.hwndHelp =HwndDlg;
// now send the new window type
HtmlHelp(HwndDlg, pszFile, HH_SET_WIN_TYPE, (DWORD) &m_hhWinType);
HtmlHelp(HwndDlg,"C:\\Langref.chm>test",HH_HELP_CONTEXT,5223);
if (HwndDlg==NULL) {
printf("Failed to open the Help file\n");
};
if (!HwndDlg)
{
return FALSE;
}
//ShowWindow(hWnd, nCmdShow);
//UpdateWindow(hWnd);
return TRUE;
}
///////////////////////////////////////////////////////////////////
// FUNCTION: WndProc(HWND, unsigned, WORD, LONG)
//
// PURPOSE: Processes messages for the main window.
//
// WM_COMMAND - process the application menu
// WM_PAINT - Paint the main window
// WM_DESTROY - post a quit message and return
//
//////////////////////////////////////////////////////////////////
LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam)
{
int wmId, wmEvent;
PAINTSTRUCT ps;
HDC hdc;
TCHAR szHello[MAX_LOADSTRING];
LoadString(hInst, IDS_HELLO, szHello, MAX_LOADSTRING);
switch (message)
{
case WM_COMMAND:
wmId = LOWORD(wParam);
wmEvent = HIWORD(wParam);
// Parse the menu selections:
switch (wmId)
{
case IDM_ABOUT:
DialogBox(hInst, (LPCTSTR)IDD_ABOUTBOX, hWnd, (DLGPROC)About);
break;
case IDM_EXIT:
DestroyWindow(hWnd);
break;
default:
return DefWindowProc(hWnd, message, wParam, lParam);
}
break;
case WM_PAINT:
hdc = BeginPaint(hWnd, &ps);
// TODO: Add any drawing code here...
RECT rt;
GetClientRect(hWnd, &rt);
DrawText(hdc, szHello, strlen(szHello), &rt, DT_CENTER);
EndPaint(hWnd, &ps);
break;
case WM_DESTROY:
PostQuitMessage(0);
break;
default:
return DefWindowProc(hWnd, message, wParam, lParam);
}
return 0;
}
/////////////////////////////////////////////////////////////////////////
// Mesage handler for about box.
/////////////////////////////////////////////////////////////////////////
LRESULT CALLBACK About(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam)
{
switch (message)
{
case WM_INITDIALOG:
return TRUE;
case WM_COMMAND:
if (LOWORD(wParam) == IDOK || LOWORD(wParam) == IDCANCEL)
{
EndDialog(hDlg, LOWORD(wParam));
return TRUE;
}
break;
}
return FALSE;
}
////////////////////////////////////////////////////////////////////////
// helpwinapp.cpp : Defines the entry point for the application.
///////////////////////////////////////////////////////////////////////
naag
|
|
|
|
|
Hi there,
I output 2 data structs into one file. I need to swap the data in that file. Would I need to create a new struct that is comprised of those two structs, store it, swap the bytes and dump it back into the file? The file contains chars and unsigned shorts.
Thanks!
|
|
|
|
|
I'm envisioning something like:
struct s1;
struct s2;
read data into s1;
read data into s2;
write data from s2;
write data from s1; Is that anywhere close?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Yes, write data from s1 and s2 to someFileName. Swap the data in that file and write to PCMCIA card. To extract from the card, we need to reverse the order.
|
|
|
|
|
Hi!
I was wondering if you could help me with something. I have to write code on serial communication for my computing class, and I was hoping you could take a look at it for me?
I can't figure out what the problem is. It's impossible to read data while the program is executed - there's no data in que then - but debugging it, it works fine ...?! I've also used WaitCommEvent, but it works like crap, too. It seems that actually no data arrives, just why?. Isn't it possible to see how much data is present and read exactly that amount? The interface hooked up at Rs232 works faultlessly. What else could cause such problems I'm confronted with?
I hope this and my English did make any sense to you 
Awaiting your response,
Pit
Maybe someone wanna take a closer look at my code. Here it is:
(Please let me know if I've made any terrible errors!)
<br />
#include "Com_Handle.h"<br />
<br />
unsigned char CRC(void);<br />
<br />
<br />
Com_Port::Com_Port()<br />
{<br />
Init_ELM();<br />
}<br />
<br />
Com_Port::~Com_Port()<br />
{<br />
Close_Comport(DriverHandle);<br />
}<br />
<br />
<br />
HANDLE Com_Port::Open_Comport (DWORD Comport)<br />
{ <br />
switch (Comport) <br />
{<br />
case 1:<br />
strcpy (Com_Name, "COM1");<br />
break;<br />
case 2:<br />
strcpy (Com_Name, "COM2");<br />
break;<br />
case 3:<br />
strcpy (Com_Name, "COM3");<br />
break;<br />
case 4:<br />
strcpy (Com_Name, "COM4");<br />
break;<br />
default:<br />
return 0;<br />
}<br />
<br />
<br />
DriverHandle = CreateFile (Com_Name,<br />
GENERIC_READ | GENERIC_WRITE,<br />
0,<br />
NULL,<br />
OPEN_EXISTING,<br />
0,<br />
NULL);<br />
<br />
<br />
if (DriverHandle == INVALID_HANDLE_VALUE) <br />
{<br />
Get_Error();<br />
return (FALSE);<br />
}<br />
return DriverHandle;<br />
}<br />
<br />
<br />
int Com_Port :: Config_ComPort(HANDLE DriverHandle, DWORD BaudRate)<br />
{<br />
cout << "Configuring ELM ..." << endl;<br />
<br />
switch (BaudRate)<br />
{<br />
case 110:<br />
DCB_Baud_Rate = CBR_110;<br />
break; <br />
case 300:<br />
DCB_Baud_Rate = CBR_300;<br />
break; <br />
case 600:<br />
DCB_Baud_Rate = CBR_600;<br />
break; <br />
case 1200:<br />
DCB_Baud_Rate = CBR_1200;<br />
break; <br />
case 2400:<br />
DCB_Baud_Rate = CBR_2400;<br />
break; <br />
case 4800:<br />
DCB_Baud_Rate = CBR_4800;<br />
break; <br />
case 9600:<br />
DCB_Baud_Rate = CBR_9600;<br />
break; <br />
case 14400:<br />
DCB_Baud_Rate = CBR_14400;<br />
break; <br />
case 19200:<br />
DCB_Baud_Rate = CBR_19200;<br />
break;<br />
case 38400:<br />
DCB_Baud_Rate = CBR_38400;<br />
break; <br />
case 56000:<br />
DCB_Baud_Rate = CBR_56000;<br />
break; <br />
default:<br />
return 0;<br />
}<br />
<br />
<br />
<br />
if(!SetupComm (DriverHandle, 1024, 1024))<br />
Get_Error();<br />
<br />
<br />
if(!GetCommState (DriverHandle, &ELM_DCB))<br />
Get_Error();<br />
<br />
ELM_DCB.BaudRate = DCB_Baud_Rate;<br />
ELM_DCB.fParity = 0;<br />
ELM_DCB.fOutxCtsFlow = 0;<br />
ELM_DCB.fOutxDsrFlow = 0;<br />
ELM_DCB.fDtrControl = DTR_CONTROL_DISABLE;<br />
ELM_DCB.fDsrSensitivity = FALSE;<br />
ELM_DCB.fTXContinueOnXoff = 0;<br />
ELM_DCB.fOutX = 0;<br />
ELM_DCB.fInX = 0;<br />
ELM_DCB.fErrorChar = 0;<br />
ELM_DCB.fNull = 0;<br />
ELM_DCB.fRtsControl = RTS_CONTROL_DISABLE;<br />
ELM_DCB.fAbortOnError = 0;<br />
ELM_DCB.ByteSize = 8;<br />
ELM_DCB.Parity = NOPARITY;<br />
ELM_DCB.StopBits = ONESTOPBIT;<br />
<br />
if(!SetCommState (DriverHandle, &ELM_DCB))<br />
Get_Error();<br />
<br />
<br />
if(!SetCommMask (DriverHandle, EV_TXEMPTY))<br />
Get_Error();<br />
<br />
COMMTIMEOUTS sTo;<br />
<br />
if(GetCommTimeouts(DriverHandle, &sTo))<br />
{<br />
sTo.ReadIntervalTimeout = 100;<br />
sTo.ReadTotalTimeoutConstant = 100 ;<br />
sTo.ReadTotalTimeoutMultiplier = 100;<br />
sTo.WriteTotalTimeoutConstant = 0;<br />
sTo.WriteTotalTimeoutMultiplier = 0;<br />
}<br />
else<br />
{<br />
return (FALSE);<br />
}<br />
<br />
if(!(SetCommTimeouts(DriverHandle, &sTo)))<br />
{<br />
Get_Error();<br />
}<br />
return 0; <br />
}<br />
<br />
<br />
<br />
<br />
int Com_Port :: Close_Comport (HANDLE DriverHandle)<br />
{<br />
<br />
if ((DriverHandle == 0) || (DriverHandle == INVALID_HANDLE_VALUE))<br />
{<br />
return FALSE; <br />
}<br />
<br />
CloseHandle (DriverHandle);<br />
<br />
<br />
return TRUE;<br />
}<br />
<br />
<br />
int Com_Port :: Write_Comport (HANDLE DriverHandle, DWORD NumBytes, void *Buffer)<br />
{<br />
DWORD BytesWritten; <br />
BOOL status;<br />
<br />
if ((DriverHandle == 0) || (DriverHandle == INVALID_HANDLE_VALUE)) {<br />
return FALSE;<br />
} <br />
<br />
<br />
status = WriteFile (DriverHandle, Buffer, NumBytes, &BytesWritten, 0);<br />
<br />
<br />
return TRUE;<br />
}<br />
<br />
<br />
<br />
<br />
<br />
int Com_Port :: Read_Comport (HANDLE DriverHandle,<br />
DWORD *BytesRead,<br />
DWORD BufferSize,<br />
void *Buffer)<br />
{<br />
COMSTAT Our_Comstat;<br />
<br />
if ((DriverHandle == 0) || (DriverHandle == INVALID_HANDLE_VALUE)) {<br />
return (FALSE);<br />
} <br />
<br />
<br />
ClearCommError (DriverHandle, &Com_Errors, &Our_Comstat);<br />
<br />
<br />
<br />
cout << "QUE: " << Our_Comstat.cbInQue << endl;<br />
<br />
if (Our_Comstat.cbInQue > 0) <br />
{<br />
if (Our_Comstat.cbInQue > BufferSize)<br />
{<br />
BytesToRead = BufferSize;<br />
} <br />
else<br />
{<br />
BytesToRead = Our_Comstat.cbInQue;<br />
}<br />
<br />
<br />
if (!ReadFile (DriverHandle, Buffer, BytesToRead, BytesRead, NULL))<br />
{<br />
cout << "Read FAIL!\n";<br />
}<br />
}<br />
else<br />
{<br />
*BytesRead = 0;<br />
}<br />
return TRUE;<br />
}<br />
<br />
int Com_Port::Get_Error()<br />
{<br />
Com_Errors = GetLastError();
cout << "An error occured: " << GetLastError() << endl << endl;<br />
return 0;<br />
}<br />
<br />
unsigned int Com_Port::Port_No = 0;<br />
<br />
int Com_Port :: Init_ELM ()<br />
{ <br />
cout << "Searching ComPort, please wait. \n\n";<br />
do<br />
{ <br />
Port_No ++;<br />
DriverHandle = Open_Comport (Port_No);<br />
}<br />
while(!DriverHandle && Port_No != 5);<br />
if (!DriverHandle)<br />
{<br />
cout << "Unable to open port" << endl;<br />
return 0;<br />
}<br />
cout << "Connected on " << Com_Name << endl;<br />
Config_ComPort(DriverHandle, 9600);<br />
ComHandle = DriverHandle;
return 0;<br />
}<br />
<br />
<br />
unsigned char CRC(void)<br />
{<br />
unsigned char msg_buf[20], nBytes=0;<br />
<br />
unsigned char CRC_Reg=0xff;<br />
unsigned char poly,i,j;<br />
unsigned char Checksum=0;<br />
unsigned char *Byte_point, Bit_point;<br />
<br />
for (i=0, Byte_point=msg_buf; i<nBytes; i++, Byte_point++)<br />
{<br />
for (j=0, Bit_point=0x80 ; j<8; j++, Bit_point>>=1)<br />
{<br />
if (Bit_point & *Byte_point)<br />
{<br />
if (CRC_Reg & 0x80)<br />
poly=1;<br />
<br />
else<br />
poly=0x1C;<br />
<br />
CRC_Reg= ( (CRC_Reg << 1) | 1)^poly;<br />
}<br />
else<br />
{<br />
poly=0;<br />
<br />
if (CRC_Reg & 0x80)<br />
poly=0x1D;<br />
<br />
CRC_Reg= (CRC_Reg << 1)^poly;<br />
}<br />
}<br />
}<br />
return ~CRC_Reg;
}<br />
<br />
|
|
|
|
|
#include "Com_Handle.h"
unsigned char CRC(void);
Com_Port::Com_Port()
{
Init_ELM();
}
Com_Port::~Com_Port()
{
Close_Comport(DriverHandle);
}
HANDLE Com_Port::Open_Comport (DWORD Comport)
{
switch (Comport) {
case 1:
strcpy (Com_Name, "COM1");
break;
case 2:
strcpy (Com_Name, "COM2");
break;
case 3:
strcpy (Com_Name, "COM3");
break;
case 4:
strcpy (Com_Name, "COM4");
break;
default:
return 0;
}
DriverHandle=CreateFile(Com_Name,GENERIC_READ|GENERIC_WRITE,0,NULL,OPEN_EXISTING,0,NULL);
if (DriverHandle==INVALID_HANDLE_VALUE) {
Get_Error();
return (FALSE);
}
return DriverHandle;
}
int Com_Port::Config_ComPort(HANDLE DriverHandle,DWORD BaudRate) {
cout << "Configuring ELM ..." << endl;
switch (BaudRate) {
case 110:
DCB_Baud_Rate=CBR_110;
break;
case 300:
DCB_Baud_Rate=CBR_300;
break;
case 600:
DCB_Baud_Rate=CBR_600;
break;
case 1200:
DCB_Baud_Rate=CBR_1200;
break;
case 2400:
DCB_Baud_Rate=CBR_2400;
break;
case 4800:
DCB_Baud_Rate=CBR_4800;
break;
case 9600:
DCB_Baud_Rate=CBR_9600;
break;
case 14400:
DCB_Baud_Rate=CBR_14400;
break;
case 19200:
DCB_Baud_Rate=CBR_19200;
break;
case 38400:
DCB_Baud_Rate=CBR_38400;
break;
case 56000:
DCB_Baud_Rate=CBR_56000;
break;
default:
return 0;
}
if(!SetupComm (DriverHandle, 1024, 1024))
Get_Error();
if(!GetCommState (DriverHandle, &ELM_DCB))
Get_Error();
ELM_DCB.BaudRate = DCB_Baud_Rate;
ELM_DCB.fParity = 0;
ELM_DCB.fOutxCtsFlow = 0;
ELM_DCB.fOutxDsrFlow = 0;
ELM_DCB.fDtrControl = DTR_CONTROL_DISABLE;
ELM_DCB.fDsrSensitivity = FALSE;
ELM_DCB.fTXContinueOnXoff = 0;
ELM_DCB.fOutX = 0;
ELM_DCB.fInX = 0;
ELM_DCB.fErrorChar = 0;
ELM_DCB.fNull = 0;
ELM_DCB.fRtsControl = RTS_CONTROL_DISABLE;
ELM_DCB.fAbortOnError = 0;
ELM_DCB.ByteSize = 8;
ELM_DCB.Parity = NOPARITY;
ELM_DCB.StopBits = ONESTOPBIT;
if(!SetCommState (DriverHandle, &ELM_DCB))
Get_Error();
if(!SetCommMask (DriverHandle, EV_TXEMPTY))
Get_Error();
COMMTIMEOUTS sTo;
if(GetCommTimeouts(DriverHandle,&sTo)) {
sTo.ReadIntervalTimeout = 100;
sTo.ReadTotalTimeoutConstant = 100 ;
sTo.ReadTotalTimeoutMultiplier = 100;
sTo.WriteTotalTimeoutConstant = 0;
sTo.WriteTotalTimeoutMultiplier = 0;
} else {
return (FALSE);
}
if(!(SetCommTimeouts(DriverHandle, &sTo))) {
Get_Error();
}
return 0;
}
int Com_Port::Close_Comport(HANDLE DriverHandle)
{
if ((DriverHandle==0)||(DriverHandle==INVALID_HANDLE_VALUE)) {
return FALSE;
}
CloseHandle (DriverHandle);
return TRUE;
}
int Com_Port::Write_Comport (HANDLE DriverHandle, DWORD NumBytes, void *Buffer)
{
DWORD BytesWritten;
BOOL status;
if ((DriverHandle==0) || (DriverHandle==INVALID_HANDLE_VALUE)) {
return FALSE;
}
status=WriteFile(DriverHandle,Buffer,NumBytes,&BytesWritten,0);
return TRUE;
}
int Com_Port::Read_Comport(HANDLE DriverHandle,DWORD * BytesRead,DWORD BufferSize,void *Buffer)
{
COMSTAT Our_Comstat;
if ((DriverHandle==0) || (DriverHandle==INVALID_HANDLE_VALUE)) {
return (FALSE);
}
ClearCommError (DriverHandle,&Com_Errors,&Our_Comstat);
cout << "QUE: " << Our_Comstat.cbInQue << endl;
if (Our_Comstat.cbInQue > 0) {
if (Our_Comstat.cbInQue > BufferSize) {
BytesToRead=BufferSize;
} else {
BytesToRead=Our_Comstat.cbInQue;
}
if (!ReadFile (DriverHandle, Buffer, BytesToRead, BytesRead, NULL)) {
cout << "Read FAIL!\n";
}
} else {
*BytesRead = 0;
}
return TRUE;
}
int Com_Port::Get_Error()
{
Com_Errors= etLastError();
cout << "An error occured: " << GetLastError() << endl << endl;
return 0;
}
unsigned int Com_Port::Port_No=0;
int Com_Port::Init_ELM () {
cout << "Searching ComPort, please wait. \n\n";
do {
Port_No ++;
DriverHandle = Open_Comport (Port_No);
} while(!DriverHandle && Port_No != 5);
if (!DriverHandle) {
cout << "Unable to open port" << endl;
return 0;
}
cout << "Connected on " << Com_Name << endl;
Config_ComPort(DriverHandle, 9600);
ComHandle=DriverHandle;
return 0;
}
unsigned char CRC(void)
{
unsigned char msg_buf[20], nBytes=0;
unsigned char CRC_Reg=0xff;
unsigned char poly,i,j;
unsigned char Checksum=0;
unsigned char *Byte_point, Bit_point;
for (i=0,Byte_point=msg_buf;i {
for (j=0, Bit_point=0x80 ; j<8; j++, Bit_point>>=1) {
if (Bit_point & *Byte_point) {
if (CRC_Reg & 0x80)
poly=1;
else
poly=0x1C;
CRC_Reg= ( (CRC_Reg << 1) | 1)^poly;
} else {
poly=0;
if (CRC_Reg & 0x80)
poly=0x1D;
CRC_Reg= (CRC_Reg << 1)^poly;
}
}
}
return ~CRC_Reg;
}
|
|
|
|
|
Hello,
I have an activeX control project which contains several controls. When you start an AtiveX control project you are allowed to select how many components syou want the project to contain.
What happens now that I want to add more components to this project?Can't seem to find any information elsewhere.
Thanks! 
|
|
|
|
|
hello,
I didn't know where to ask so I hope you can help me ...
I want to develop nokia series 60 applications ... and I am using sdk 2.1 with visual studio .net and I don't see a class wizard ... I have downloaded sdk 1.2 who has a wizard for visual studio 6 and it seems that class wizard is still not implemented... or I didn't figure out how to use it ... plizzz can anyone help me ... what IDE should I use to develop this kind of applications or ... what should I do to make visual studio 6 / visual studio.net class wizard works !
thank you ...
|
|
|
|
|
codewarrior with the symbian simulator for nokias...
TOXCCT >>> GEII power
[toxcct][VisualCalc]
|
|
|
|
|
Hi There,
Does anyone know of a third party software that allows me to do simple graphics (lines, polylines, text, etc...) in an EMF format and be able to drap/drop and edit the images?
I've looked into LEAD Technologies and MetaDraw but they're not exactly what I'm looking for. Ther former doesn't support editing and MetaDraw is a VB OCX, mainly with VB documentation.
Any help in this matter is greatly appreciated.
Thank,
A.
|
|
|
|
|
Hi All
if have a variable
m_e_date = COleDateTime::GetCurrentTime();
which equals the current time,
how do i get it so that its the current time plus 2 hours
similar to DATEADD in SQL
or how do i increase the current time by two hours
so 14:00 would be 16:00
hope that makes sense
|
|
|
|
|
Take a look at COleDateTimeSpan. This should do the trick
|
|
|
|
|
How about:
COleDateTime now = COleDateTime::GetCurrentTime();
now += COleDateTimeSpan(2, 0, 0, 0);
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
DavidCrow wrote:
COleDateTime now = COleDateTime::GetCurrentTime();now += COleDateTimeSpan(2, 0, 0, 0);
superb 
|
|
|
|
|
IS there any way check if file exist without attempting to open the file? Just by looking at directory structure?
I am using MFC and trying to open 2 files simultaneously. Each one can't be open unless the other exist.
|
|
|
|
|
PathFileExists() will be helpfull to u.
-prakash
|
|
|
|
|
i use
BOOL bExist;
CFileFind finder;
bExist=finder.FindFile(strDirPath);
if(bExist)
{
finder.FindNextFile();
if(!finder.IsDirectory())
bExist=FALSE;
}
finder.Close();
|
|
|
|
|
There's always the good old CRT function access()....
onwards and upwards...
|
|
|
|
|
See here for a discussion on this common subject.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
hey David,
do you know your links still don't work ???
TOXCCT >>> GEII power
[toxcct][VisualCalc]
|
|
|
|
|
No I didn't. Thanks.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
