C / C++ / MFC

31-May-05 23:10

Have a look at CWinApp::GetPrinterDeviceDefaults()

"You're obviously a superstar." - Christian Graus about me - 12 Feb '03

"Obviously ??? You're definitely a superstar!!!" mYkel - 21 Jun '04

Within you lies the power for good - Use it!

Honoured as one of The Most Helpful Members of 2004

Re: Printing

Nilesh K.1-Jun-05 0:01

Problem receiving UDP packets

1-Jun-05 0:01

Check out for EnumPrinters API, This should be able to get you available printers.

<bold>- Nilesh
<italics>
"Reading made Don Quixote a gentleman. Believing what he read made him mad" -George Bernard Shaw

ilgale31-May-05 22:48

ilgale

31-May-05 22:48

My application uses a socket to receive periodic UDP multicast messages (messages are send every 100 millisecs and theyr size is variable).
When I run my application in some PCs, I've seen that when it receives a long message (1360 bytes or more), that packet is correctly received but sometimes the next one is lost (the socket doesn't receive it) even if it is a small one. Using a network monitor application, I've seen that this problem happens when the packet is fragmented in more than 7 packets at UDP level.

In sinthesys, the problem is that long packets (fragmented in more that 7 packets at UDP level) are received but lets the socket loose the next one. It doesn't happen any time, and it doesn't happen on any PC.

Can someone tell me what is this problem due to ?
Are there some socket options usefull to solve this problem ?

Thanks a lot !!

fstream buffer limits

mcsherry31-May-05 22:30

mcsherry

31-May-05 22:30

Can anyone tell me what the maximum number of unsigned chars that can be read in from a file using the read method.

TIA,
Andy

MFC, push release button help

Rostfrei31-May-05 22:26

Rostfrei

31-May-05 22:26

Hello!

I'm using VC++ in .NET Studio. I made simple MFC dialog based application with resource builder. I know how to handle some button press and event is executed on button release. But I don't know how to handle button press and button release. For example if I press (mouse button down) "LIGHT" button, virtual light would start to shine and when I release button (mouse button up) virtual light would stop shineing.

Can it be done?

Regards,

Rostfrei

Converting txt to bmp

Nilesh K.31-May-05 22:09

31-May-05 22:09

Hi,

Can anyone suggest a way to convert a text file to bmp at runtime Confused | :confused:

,
I was able to create and save the bitmap file but was unable to append text to it. Sigh | :sigh:

<bold>- Nilesh
<italics>
"Reading made Don Quixote a gentleman. Believing what he read made him mad" -George Bernard Shaw

PJ Arends31-May-05 22:15

31-May-05 22:15

Load (or create) the bitmap, select it into a memory DC and use DrawText or TextOut to draw your text onto the bitmap the same as you would draw text onto the screen DC. Select the bitmap out of the DC and save it.

"You're obviously a superstar." - Christian Graus about me - 12 Feb '03

"Obviously ??? You're definitely a superstar!!!" mYkel - 21 Jun '04

Within you lies the power for good - Use it!

Honoured as one of The Most Helpful Members of 2004

Nilesh K.31-May-05 22:24

31-May-05 22:24

already tried that but I don't see any text in the saved bmp file Confused | :confused:

<bold>- Nilesh
<italics>
"Reading made Don Quixote a gentleman. Believing what he read made him mad" -George Bernard Shaw

PJ Arends31-May-05 23:01

31-May-05 23:01

Show your code.

"You're obviously a superstar." - Christian Graus about me - 12 Feb '03

"Obviously ??? You're definitely a superstar!!!" mYkel - 21 Jun '04

Within you lies the power for good - Use it!

Honoured as one of The Most Helpful Members of 2004

Nilesh K.31-May-05 23:14

31-May-05 23:14

<br />
        CreateBitmap();<br />
<br />
	m_pMemDC = new CDC;<br />
<br />
	VERIFY( m_pMemDC->CreateCompatibleDC(m_pWinDC) );<br />
<br />
	m_pOldBitmap = m_pMemDC->SelectObject( &m_Bitmap );<br />
<br />
	CString str("This is a test message");<br />
<br />
	CPen cp;<br />
	cp.CreatePen(PS_SOLID, 2,RGB(255,255,255));<br />
<br />
	CRect rect;<br />
	GetClientRect(&rect);<br />
<br />
	m_pMemDC->SelectObject(&cp);<br />
	m_pMemDC->DrawText(str,str.GetLength(),rect,DT_LEFT);<br />
<br />
	PBITMAPINFO pbi = getInfoStruct(m_Bitmap);<br />
<br />
	CreateBMPFile("test.bmp",pbi,m_Bitmap,m_pMemDC->m_hDC);<br />
        m_pMemDC->SelectObject(m_pOldBitmap);<br />

<bold>- Nilesh
<italics>
"Reading made Don Quixote a gentleman. Believing what he read made him mad" -George Bernard Shaw

ThatsAlok1-Jun-05 0:15

ThatsAlok

1-Jun-05 0:15

Nilesh K. wrote:
CreateBMPFile("test.bmp",pbi,m_Bitmap,m_pMemDC->m_hDC);

I Believe, Such function doesn't exist in WIndow's Api!.
could you show coding for that too, as your problem may be at the time of saving!

"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow

cheers,
Alok Gupta

Nilesh K.1-Jun-05 0:23

1-Jun-05 0:23

<br />
CRect rect;<br />
	CSize size;<br />
<br />
	GetClientRect(&rect);<br />
	size = rect.Size();<br />
<br />
	LPBITMAPINFO lpbi;<br />
<br />
	// Fill in the BITMAPINFOHEADER<br />
	lpbi = (LPBITMAPINFO) new BYTE[sizeof(BITMAPINFOHEADER) + (256 * sizeof(RGBQUAD))];<br />
	lpbi->bmiHeader.biSize = sizeof(BITMAPINFOHEADER);<br />
	lpbi->bmiHeader.biWidth = size.cx;<br />
	lpbi->bmiHeader.biHeight = size.cy;<br />
	lpbi->bmiHeader.biPlanes = 1;<br />
	lpbi->bmiHeader.biBitCount = 8;<br />
	lpbi->bmiHeader.biCompression = BI_RGB;<br />
	lpbi->bmiHeader.biSizeImage = WIDTHBYTES((DWORD)size.cx * 8) * size.cy;<br />
	lpbi->bmiHeader.biXPelsPerMeter = 0;<br />
	lpbi->bmiHeader.biYPelsPerMeter = 0;<br />
	lpbi->bmiHeader.biClrUsed = 0;<br />
	lpbi->bmiHeader.biClrImportant = 0;<br />
<br />
	// Fill in the color table<br />
	UINT uUsage = DIB_RGB_COLORS;<br />
<br />
	memcpy( lpbi->bmiColors, m_rgbPalette, sizeof(RGBQUAD) * 256 );<br />
<br />
	m_pWinDC = new CWindowDC(this);<br />
<br />
	HBITMAP hBitmap = CreateDIBSection( m_pWinDC->m_hDC, lpbi, uUsage, (void **)&m_pBits, NULL, 0 );<br />
<br />
	delete [] (BYTE *)lpbi;<br />
<br />
	ASSERT(hBitmap != NULL);<br />
<br />
	m_Bitmap.Attach( hBitmap );<br />

<bold>- Nilesh
<italics>
"Reading made Don Quixote a gentleman. Believing what he read made him mad" -George Bernard Shaw

How can I disable Firewall

khan++1-Jun-05 1:38

khan++

1-Jun-05 1:38

CPen cp;
cp.CreatePen(PS_SOLID, 2,RGB(255,255,255));

Why write white text?

Maybe the color of the bitmap is white: RGB(255,255,255), that is why the text does not show.

this is this.

Ali_quaidian31-May-05 21:42

Ali_quaidian

31-May-05 21:42

I need to disable firewalls. If all firewall cannot be disable then at least guide me to disable WindowsXp firewall.

I am using Visual C++ 6.0

Thanks

Quaidian For Once, Quaidian For Ever

Re: How can I disable Firewall

Christian Graus31-May-05 22:01

Christian Graus

31-May-05 22:01

The firewall is unlikely to shut down quietly - you should just tell your user to turn it off, assuming you absolutely have to.

Christian Graus - Microsoft MVP - C++

transfer data between dialog boxes

abhi_code31-May-05 21:36

abhi_code

31-May-05 21:36

Hi ALL !

actually i have a main dialog which has 3 buttons
the first button when clicked dispplays a dialog
with 3 radio buttons. iam selecting one of radio
button say r1.
the second button when clicked displays another
child dialog with 2 radio buttons. out of which iam
selecting one of radio button say R1.
Now when i press the view properties that is third
button i should get the information from these
selected radio buttons that is r1 and R1 and get it
displayed in new dialog box.
iam able to display third dialog box , but
unable to retrieve info from the 2 radio buttons which
are in 2 dialog boxes.
now the problem is how to retrieve
information from the 2 dialogs and display it in the
third dialog.

So Reply me as soon as possible

Thanks in Advance,

Abhijeet Jadhav

Cedric Moonen31-May-05 21:55

Cedric Moonen

31-May-05 21:55

The best way to do that is something like that:

Say your main dialog is CMainDlg, and your three other dialogs are CDialog1, CDialog2 and CDialog3

void CMainDlg::OnButton1()<br />
{<br />
   CDialog1 Dlg;<br />
   Dlg.DoModal();<br />
<br />
   RadioStatus1 = Dlg.GetRadioStatus();<br />

The same thing for Button2 (retrieving RadioStatus2 from CDialog2

void CMainDlg::OnButton3()<br />
{<br />
   CDialog3 Dlg;<br />
   Dlg.SetRadioStatus(RadioStatus1, RadioStatus2);<br />
   Dlg.DoModal();<br />
}

So, a quick explanation: RadioStatus1 and RadioStatus2 are member variables from your main dialog that will hold the status of the two radio buttons. In the CDialog1 and CDialog2 classes, you must add a handler function for the OnOk event (or when the dialog closes) to retrieve the status of the radio button and save it in a member variable of this class. Then add the member function GetRadioStatus that will return this value.

Finally, for the third dialog, you must add a function that will send the values of the buttons to this dialog before calling DoModal.

Ok, this is just an example of how to do it. Hope this is clear enough...

abhi_code1-Jun-05 0:59

abhi_code

1-Jun-05 0:59

Thanks a lot cedric ...for this information
this solves my problem...in case of any doubt, i will ask you later....

Abhijeet Jadhav

Christian Graus31-May-05 21:58

Christian Graus

31-May-05 21:58

abhi_code wrote:
So Reply me as soon as possible

How unusual, someone in a hurry....

You pass the values on to the third dialog, and expose them in the second dialog using a get method, and variables that you set in the dialog class in the OnClose method, as the radio buttons won't exist once the dialog is closed.

Christian Graus - Microsoft MVP - C++

abhi_code1-Jun-05 1:02

abhi_code

1-Jun-05 1:02

Thanks Christian for the information

Abhijeet Jadhav

Assignement operator

Haakon S.31-May-05 21:17

Haakon S.

31-May-05 21:17

I have a little problem with the assignement operator and inheritance. How does this work:

class CBaseClass{
int m_intB;
const CBaseClass& operator=(const CBaseCase& b);
}

class CDerivedClass : public CBaseClass{
int m_intD;
const CDerivedClass& operator=(const CDerivedClass& d);
}

Both assignement operators are defined like this

const CBaseClass& CBaseClass::operator=(const CBaseClass& b){
m_intB=b.m_intB;
return *this;
}

Subsequently

CDerivedClass* a_obj=new CDerivedClass;
a_obj.m_intB=5;
a_obj.m_intD=6;

CDerivedClass* b_obj=new CDerivedClass;

If I do

*b_obj=*a_obj;

only the CBaseClass member is assigned.

Is it possible to make the assignement operator virtual?

Regards, Haakon S.

A sure cure for seasickness is to sit under a tree.
Spike Milligan

Re: Assignement operator

Haakon S.31-May-05 21:20

Haakon S.

31-May-05 21:20

Oops, a small error.

The statements:

a_obj.m_intB=5;
a_obj.m_intD=6;

shall of course be:

a_obj->m_intB=5;
a_obj->m_intD=6;

Haakon S.

A sure cure for seasickness is to sit under a tree.
Spike Milligan

Re: Assignement operator

PJ Arends31-May-05 21:50