|
|
Hi,
Could someone tell me how I could get Filesystemwatcher to monitor network drives? I have it monitoring local drives today but when I point it to a network drive does not seem to recognize any changes.
Thanks,
Zenly.
|
|
|
|
|
That depends on what kind of network drives you're talking about. It won't work on Samba (Linux) shares. Also, do not use this to monitor entire volumns. Response to events decreases with the number of directories (sub directories included) that your trying to track.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I'm trying to monitor a standard share on another windows machine. I even shared out a folder on the local machine and mapped to it and it fsw would not respond to changes on this either. I am running Windows xp sp2 and .nte framworks 1.1. Do you know if fsw changed any in VS.2005? I read a bit about it but I have not seen any major changes regarding fsw.
I'm just monitoring a few directories.
|
|
|
|
|
So long as the account that is running your app has the rights to see the files Modified date/time, it should work. There's nothing special to configure.
I don't know of anything that changed between versions.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Thanks Rage,
Yes... It was silly me. I did not use an id with enough privilege.
|
|
|
|
|
I am developing an application that gets streaming video from an ip camera and creates a set of .avi files. I need some way of compressing these individual files (hopefully from within my application) and then decompressing them for playback. Any suggestions?
|
|
|
|
|
Video is usually saved in compressed form. That, of course, depends on the graph that's building the .AVI file from the video source. But, for the most part, the file is already compressed, so trying to compress it again usually won't get you more than 1% reduction in size.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Ok, not sure exactly how to word this so here goes. I have a winform in my project that has the following:
Controls
1. DropDownList1 - Customer Name
2. TextBox1 - Customer ID
3. DropDownList2 - Site Name
DataBase Tables
1. tblCust - Fields(CustName, CustID, Status)
2. tblCustSiteAssoc - Fields(CustId, CustSiteID)
3. tblCustSite - Fields(CustSiteID, CustSiteName, ...)
What I am trying to do is this:
1. When the form open have customers names bound to the DropDownList1 control with nothing selected
2. Once I select something in the DropDownList1 control (SelectedIndexChanged) have it update the other two controls with the selected customers' data.
I assume I make a DataSet that queries all three tables and I understand how to bind the CustName to the first DropDownList box. What I don't understand is how to use the selected information to get the relevant information for the other two controls.
Thanks in advance,
Taen Karth
|
|
|
|
|
When you create your Dataset define a relation between all three tables. It may be better to do this back at the underlying database. Then bind all three controls to the DataSet as you normally would. Now when you select something from DropDownList1 the other two controls will display the proper related data.
I hope this helps.
|
|
|
|
|
Ok I think I need to break this down a little bit more for the relation:
Table1
CustID - PriKey - linked to Table2(CustID)
CustName
Status
Table2
CustID
CustSiteID
Table3
CustSiteID - PriKey - linked to Table2(CustSiteID)
CustSiteName
Addr1
Addr2
City
State
etc...
I have relationships setup like above. I created a new DataSet Item from Add New Item in IDE. Then it asks me to select Tables which I select the three above. It then adds these three tables to the designer with relationships and TableAdapters configured and all.
I then go to DropDownList1 and set the DataSource to the DataSet. It creates a binding source and then I set DisplayMember to CustName and it creates a new TableAdapter.
Now I want to select a customer name in DropDownList1 and have it filter DropDownList2 so that only SiteName shows that has a relationship between CustID and CustSiteID. I can only get DropDownList2 to list all SiteName. I can't figure out how to filter it.
Thanks,
Taen Karth
|
|
|
|
|
To filter use a DataView. You could say something like this:
DropDownList2.DataSource = DataSet.Table3.DefaultView
DropDownList2.DisplayMember = "CustSiteName"
But, since you have the tables related to each other I don't think filtering is neccessary. Instead set it up like this:
DropDownList2.DataSource = DataSet.Table3
DropDownList2.DisplayMember = "CustSiteName"
Since Table3 is in a relation it will show the proper records in DropDownList2
Also, I think you could elliminate Table2 and have CustID in Table3.
|
|
|
|
|
Is it possible to insert a web address in a console project as a hyperlink, and if so, how? I have a function to return a concatenated string as a complete link, but I have found no info as to whether or not it can be active.
J.E.Wier
|
|
|
|
|
As a console application just reads and writes to the Standard In, Standard Out and Standard Error streams it is up to the container (normally the command prompt) to activate links.
My: Blog | Photos
"Man who stand on hill with mouth open will wait long time for roast duck to drop in." -- Confucious
|
|
|
|
|
While I can change the text which appears in the title bar on my Windows forms, is it possible to change the Font property too?
|
|
|
|
|
Not easily. You have to override WndProc and supply the code to draw the non-client area of your form yourself.
The title bars use the systems Display control panel properties, following the theme picked by the user.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I would like some help with a present for my mother
A birthday calender can someone help me with this project
Thank you
Mike Abbinante age 14
|
|
|
|
|
Happy Birthday Mike.
So, what part are you stuck with?
My: Blog | Photos
"Man who stand on hill with mouth open will wait long time for roast duck to drop in." -- Confucious
|
|
|
|
|
I am quoting a clear example of the Junction table, in Northwind sample database.
When employing this database in a DataGrid, I receive DataConstraint Exception Error in the Junction table "Order Details" or in the "Orders" table, with the following error message:
"Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints."
On displaying one of the errant tables, each row complains as below:
"ForeignKeyConstraint, Shipper_Order (for example) requires the child key values ????? to exist in the parent table.
NOTES:
1- I established Relations just according to the ones in MS Access application.
2- The Same Database is Functioning normally inside MS Access application.
3- I am mainly concerned about the Junction table.
I need professional guidance as this is a study project, I am working on.
|
|
|
|
|
is it possible to develop a GUI designer that will generate code in java using vb?
|
|
|
|
|
Yes, but you'll have to supply all the code for writing the Java code and stringing it together properly for creating your UI. The .NET Framework doesn't have anything to do it for you.
Your next stop should be Google and "java UI designer source". But with all the ones that currently exist, why would you want to reinvent the wheel, again?
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
1.How can I allocate memory(dinamic) in vb 6?
2. How can I create aLinked List in VB 6?
|
|
|
|
|
1. Depends on what you mean by "allocate memory dynamically", and what you're using it for. VB6 doesn't have anything to allocate memory like C/C++ can, and doesn't support pointers like it either.
2. Easy. Google for "vb6 linked list[^]".
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hi everybody
I wrote a program in Vb.Net, it can open a text file (*.txt). But I don't know how to make my program that when I click on any text file (*.txt) then my program will run and open this text file.
Vo Duy Hien
|
|
|
|
|
Set that up in your folder options under file types. For the txt file type set your program to open instead of notepad or whatever.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
