|
vivek1323 wrote: how can i use xp & 2000 . whenever i have
tried , within two or three days, it becomes clashes.
then plz tell me procedure of that.......
This is might be you didn't plan well before install these 2 operating system. If you have an opportunity to try again let do as the below instruction:
*** Support that you have 20GB of hard disk drive and you want to install windows xp and windows 2000 on your computer.
1. First of all is install windows 2000 on your computer. During the installation it will ask you to partition your hard disk, look in its option and partition only 10GB for installing windows 2000. After the installation, the C: drive will have 10GB size with windows 2000 operating system.
2. After windows 2000 install successfully and your can use it as normally, then you need to install windows xp via the boot CDROM. During the installation process it will ask you to choose which disk that you want to use, then choose the remain 10GB disk space that you didn't format. Then it will install the operating system on the second drive.
3. After install successfully, you will have a boot menu to chose which OS you want to run. This mean you install windows xp successfully after install windows 2000.
Note:
- Do not install windows 2000 and windows xp on the same partition. Because it will replace the PROGRAM FILE folder which cause your application could not run correctly.
- Do not install windows 2000 after install windows xp. Windows 2000 need to install before windows xp. Install windows 2000 after windows xp, then your xp OS could not run and you could run only windows 2000. This because of the file NTLDR and NTDETECT.COM is replace on windows xp file (the same file name). But if you already install windows xp and want to install windows 2000 later you could fix this problem by reading this article.[^]
|
|
|
|
|
|
|
I think this is OS/Admin forum and my Q. is related to OS WindowsXP buttons that xp does not show XP Style buttons using vb.net with an image as i have given a link[^]). In that image buttons are XP style, in vb.net these can be easily displayed by changing flat style to system.But if i want some image on that xp style button,how this is possible!!!
|
|
|
|
|
this remains a programming question... even if you think it belongs to WindowsXP...
moreover, you link is broken (i cannot see the picture)
TOXCCT >>> GEII power
[toxcct][VisualCalc 2.20][VCalc 3.0 soon...]
|
|
|
|
|
|
Those aren't "XP Buttons" as you call them. Those are custom button controls in the Nero application. Yeah, they have a certain "look and feel" to them, but that is totally independant of the OS it's running under. Nero has that very same "look and feel" in Windows 2000, where the "XP Buttons" are not possible.
And yes, this is a VB.NET or C#, or whatever language, programming question, not an OS question.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
-- modified at 16:12 Tuesday 14th February, 2006
|
|
|
|
|
i have a virus in my pc its restart the computer when ever any exe
file or msdos is opened.
also its copys a file of 42KB in every folder of "my documents" and
the file name is same as its parent folder name and its type
is "Application" and its icon is same as folder icon there is also a
file named as empty and its type is "shortcut to MS-Dos" and size id
42KB and have icon of msdos.plz if any one know about the virus or
know how to remove it inform me.
Thank You.
We Believe in Excellence
|
|
|
|
|
Check whether Applicaton.exe is running in the Task Manager! If it is there just end this process
|
|
|
|
|
Can you tell me plz what is Applicaton.exe?
We Believe in Excellence
|
|
|
|
|
:->sorry for the mistake. it is Application.exe (a running process)
|
|
|
|
|
:->sorry for the mistake. it is Application.exe (a running process)
Any query related to VB.NET+Network Programming
email: sharma.hariomprakash@gmail.com
|
|
|
|
|
In my opinion, you should not try to turn off any process while you do not know its function. Try to use the method that I just post[^].
|
|
|
|
|
open windows in safe mode, look in the Windows Task Manager if there aren't any suspicious programs running, and please scan for any virus (with an up-to-date antivirus)
TOXCCT >>> GEII power
[toxcct][VisualCalc 2.20][VCalc 3.0 soon...]
|
|
|
|
|
Please can you tell me what is application.exe. If it is a virus or some other infaction. I could not get info about it on internet. plz help me.
We Believe in Excellence
|
|
|
|
|
In order to clear your virus, first of all i suggest you to identify the virus name. By identify the virus name, you can search on the internet (access the internet from any clean machine) about the tool to clean and the security patch that you need to apply to your windows in order to keep it secure. I suggest you to use Microsoft® Windows® Malicious Software Removal Tool (KB890830)[^] and Windows Defender[^]. The first tool will identify what is the virus on your computer and the second tool is the tool that could be clean some virus or spyware on your computer.
After you identify the virus name, you could search its name on the internet and find the method to clean it from your computer.
|
|
|
|
|
HI All,
What is the best way to load a dll explicitly? Which all header files and libraries need to be included for that. Actually i am not using gcc. We are using a compiler built internally by our company.
It does not support dllexport and dllimport attributes.
So, i want to link to the dll explicitly using OS calls. So, i want to know for windows/linux which all header files need to be included and which all libraries will be required so that i can include them in my code and see if all build well.
I know the standar procedure is to use LoadLibrary functions. But i have no idea in which files their definitions are present?
Can anybody please provide me the information regarding this?
One mroe question:
Lets say, i have int * i = (int *)0x90000; in my application. Then i write some value to this and then load a dll. In the dll i have another variable pointing to same address 0x90000 . But when i try to read the value in dll i get a different value from the one i set in the application. This is because these addresses are virtual addresses. Can anybody please let me know how this can be done so that both can access same memory.
This issue is very critical. Please help me out.
Regards,
Sapan
|
|
|
|
|
hey dude...
gotta ask u aquestion...wat if a super user in UNIX operating sys has changed the rights of all users...??? is there ne way to change those rights to 777 so that every1 can access the files....plz do reply
manan
|
|
|
|
|
HI All,
What is the best way to load a dll explicitly? Which all header files and libraries need to be included for that. Actually i am not using gcc. We are using a compiler built internally by our company.
It does not support dllexport and dllimport attributes.
So, i want to link to the dll explicitly using OS calls. So, i want to know for windows/linux which all header files need to be included and which all libraries will be required so that i can include them in my code and see if all build well.
I know the standar procedure is to use LoadLibrary functions. But i have no idea in which files their definitions are present?
Can anybody please provide me the information regarding this?
One mroe question:
Lets say, i have int * i = (int *)0x90000; in my application. Then i write some value to this and then load a dll. In the dll i have another variable pointing to same address 0x90000 . But when i try to read the value in dll i get a different value from the one i set in the application. This is because these addresses are virtual addresses. Can anybody please let me know how this can be done so that both can access same memory.
This issue is very critical. Please help me out.
Regards,
Sapan
|
|
|
|
|
Dear All,
How can I solve this problem.
I am having Mandrake 9.1 ,Apache2 web server.
I am getting my .php file through browser but when accessing .js file through this .php file it is giving
HTTP/1.1 304 but .js is already present in correct location.
Please any help.
rpkumar
|
|
|
|
|
The HTTP status code 304 does not indicate an error. Instead, it means that the requested file has not changed since the last time the user agent requested it. This provides a certain amount of efficiency in HTTP-based communications by reducing the amount of bandwidth needed to realize a URL.
If you change one of the JavaScript files, then the next user agent request will result in a 200. Then, on the next request, your user agent should get a 304, again.
|
|
|
|
|
hi, i have a problem with my keyboard laptop. my laptop series dell c600 latitute. and i install two windows to run in order to learn too (windows xp home and xp professional). The problem occure when i try to start my computer in windows xp pro and when i need to type the user name and password, but the character display incorrectly. Key keyboard is QWERTY keyboard lay out but when i press the key on the left hand (ASDFG QWERT ZXCVB) it display correctly. But when i press on the key for right hand its display in correctly such as: when i pres:
- "m" character its display number "0".
- "n" character its display number "1".
... and so on.
I think this might be a problem with my keyboard but when i try to start in windows xp home edition. Every key is typing correctly. it is very surprise for me because i expect that the problem might occure the same as windows xp pro.
So now I do not know what the problem come from. I didn't change any configuration in windows control panel or REGEDIT. But now i can't identify why this problem come from. Could anyone give me any idea or solution to solve this issue?
|
|
|
|
|
|
No I didn't, and i also suspect about this point too. Because this machine is used to download many trail software which leave it online every night. But my windows anti-spyware are schedule to run at 2am in the morning. And every morning when i get up i found it already scan my computer and no spyware or viruses were found on my computer. But i will try to find another way to update its definition engine and try to scan again.
Thank you for your question.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
But this does if I select flat style->standard or others except system....Is there any another method, becouse I've seen some XP Buttons containing image or icon, eg. in the following link(nero burning appls)
