|
Eddymvp wrote: I couldn't find any forum related to just VB so the closest one to my topic was this one.
This forum is for VB.
Eddymvp wrote: Does anyone know of a VB DEcompiler?
For decompiling a .exe file? You cannot do that, because once a program is compiled, there's no way of decompiling the code because it's just 1s and 0s then.
Trinity: Neo... nobody has ever done this before.
Neo: That's why it's going to work.
|
|
|
|
|
VB5 and 6 both compiled down to native code, but start at too high a level. There is nothing that will decompile it back to anything close to resembling the original source.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Search for reverse engineering and VB.
As already have been pointed out, it's impossible to get the original code back, but it's possible to re-create code that will do the same as the original code did.
---
Year happy = new Year(2007);
|
|
|
|
|
You can try to read the ansi character if you want to get dizzy. Why don't you make the decompiling program by yourself
|
|
|
|
|
Hi
Im wanting to find out alittle about the etiquette or practise if you like about handling databases in terms of do they ever need to be recreated after a certain time or is a database supposed to live for as long as you using the software .
I guess in short what im wanting to know is. if my app is a reciepting software , is there a time i need to tell my app that its time to backup a final copy of the database and create a clean copy perhaps each year or so. how does it work.
thanks. i hope i've been able to relay what i need so understand
Robbo
|
|
|
|
|
vbbeg wrote: Im wanting to find out alittle about the etiquette or practise if you like about handling databases in terms of do they ever need to be recreated after a certain time or is a database supposed to live for as long as you using the software .
It depends. If you want to hose a database and start again, then you'd recreate it. If the data was corrupt, you may restore from a backup. There's no way you regularly backup and restore for no good reason, and running your scripts again will delete all your data, by default.
And, if you're using an MDB, you have a pretty limited database to start with. It's not necessarily a problem, if your app is small, but you end up with a file you can easily just copy over, without having to use management services at all. But, only if you want to reset it, or restore to a point.
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
Hi Christian
from what i've learnt is that its a matter of design right ?. actually i am using access db. is there a pattern i should follow when wanting to recreate or reset the database . for e.g. yearly . end of financial year etc. is that something i should incorporate in my app.
many thanks
|
|
|
|
|
vbbeg wrote: actually i am using access db.
MDB is an Access database, or another name would be "Jet". It's the file extension used by Access.
vbbeg wrote: is there a pattern i should follow when wanting to recreate or reset the database . for e.g. yearly . end of financial year etc. is that something i should incorporate in my app.
If your requirements specify it, then yes. Like Christian said, it's up to you what you do with the data.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Given that you're using an MDB, the easiest solution would be to carry a copy of an empty database in the program, and copy it over the database if you ever want to reset it. But, yes, it's up to you. I've never offered this in any way, if I want to reset a DB, I run the scripts again, but generally a DB exists to store data, and once I store it, I keep it 
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
Thanks a million Chris. I will migrate to SQL hopefully soon. i guess my thought to understand how databases should be maintained to be at a certain size etc especially when it comes to backups etc. in any fact i've got what i need for now and thankyou so much for your assistance.
Regards
Robbo
|
|
|
|
|
vbbeg wrote: I will migrate to SQL hopefully soon
You mean SQL Server ? It makes more sense for a distributed application, for sure.
Glad to help
Christian Graus - C++ MVP
'Why don't we jump on a fad that hasn't already been widely discredited ?' - Dilbert
|
|
|
|
|
Hello,
i've made an extended aero glass form with the DwmExtendFrameIntoClientArea.
The problem now is, that i cannot see the text, because the ForeColor is Black and Vista makes everything is black transparent (like the glass effect), so how get i my text in black there?
I know, i can draw the text, but i have so much controls and have there an textbox control, so i can't draw easily the text.
Look at the MediaPlayer, at the bottom margin, there is the text of the song and so on and that's not drawed, but with an white shadow.
Can somebody help me to get my Text in Black?
|
|
|
|
|
I did the following steps:
1. Created a report using SQL Reporting Services. (OK)
2. Deployed the project (ABC) into the ServerX. (OK)
3. Opened the SQL Reporting Services using the Report Manager on localhost of the ServerX. (OK)
4. Opened the ABC folder. Files deployed. (OK)
5. Created two subscriptions. One (Service1) for printing to the Printer. One (Service2) for saving into a file. (OK)
6. Opened the Service1. In the View Tab, after entering the Report Parameters, clicked on "View Report". (OK)
7. I expected view to show what I viewed in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different)
8. Tried to export to a TIFF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different)
9. Tried to export to a PDF file expecting to see the same view as I saw in the Project (ABC). (NOK - It printed a wrong format. Alignment was completely different)
10. In the subscriptions, I ran the Service1 to print the report from the SQL Reporting Services directly onto the Printer. (NOK - It printed a wrong format. Alignment was completely different)
Is this an expected issue with SQL Reporting Services which incase doesnt make any sense to use it. Or it is an issue with my code. All I assumed that I should expect from SQL Reporting Services is: if I create a Report and I preview the Report, I should get a WYSIWYG formats.
Half the way through our project, we are completely stuck up. SOS!!!
|
|
|
|
|
Ummm, this has precisely what to do with VB.NET? Are you sure you're not looking for the SQL Forum[^]?
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Hi there,
Ive been working on a simple VB project for work now for a few months on and off. Its a very simple project, just opening and closing forms, nothing complicated as i have very little experience with programming. Its more for presentations sake than anythin functional.
Its due pretty soon, and of course, somethings gone wrong.
When I build the solution, i get three errors.
1. Could not copy temporary files to the output directory.
2. The file 'Name.exe' cannot be copied to the run directory. The process cannot access the file because it is being used by another process.
3. The file 'Name.pdb' cannot be copied to the run directory. The process cannot access the file because it is being used by another process.
There is nothing else running on the computer at the moment and i cant think of anythin i could have done for this to happen.
If anyone could help me out with this, i would greatly appreciated it
Thanks for your time,
Peter
|
|
|
|
|
Has a reboot fixed your issue? Obviously something is locking your build files (Name.Exe & .Pdb) If that does not work try chaning your build folder. Project->Properties Click the Build Tab. In the output section Change "Output Path"
You can only be young once. But you can always be immature.
- Dave Barry
|
|
|
|
|
how to create login page in vb.net?
hello
|
|
|
|
|
Well, you can use a template login page by selecting Add New Object > Login Form. Or you could create your own using a textbox, then matching the value of the textbox to a password.
Trinity: Neo... nobody has ever done this before.
Neo: That's why it's going to work.
|
|
|
|
|
thanq for ur suggession!!
i did this in ASP.NET but im new to VB.NET.
im tried using textboxes, there im facing problem of navigation from login page to welcome page..
plz help me out !!!!!!
|
|
|
|
|
swathiiiiiiiiii wrote: im tried using textboxes, there im facing problem of navigation from login page to welcome page..
What exactly do you mean?
Trinity: Neo... nobody has ever done this before.
Neo: That's why it's going to work.
|
|
|
|
|
you can use redirect method after the page check the username and password.
<% bla bla bla<your code="">bla bla
.
.
response.redirect <page_name> %>
|
|
|
|
|
hi swathi,
if u are asking the navigation from one winform to another...then do this.
take 2 text boxes (TxtUid, TxtPwd), and a button (BtnSumbit)
Login.vb, Welcome.vb are 2 forms
Private Sub BtnSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnSubmit.Click
Dim Userid As String
Dim Password As String
Userid = "Max"
Password = "Ruby"
Note: i just hard-coded user id and password here. but u have to change the code according to ur requirement. i mean if u want to validate the user id, and password with Database values then just modify the code accordingly
If Me.TxtUid.Text = Userid And Me.TxtPwd.Text = Password Then
Welcome.Show()
Me.Close()
End If
End Sub
End Class
if u want to access the login form values(user id, password values), then first, u need to set the modifiers property of the text boxes to Public. (by default the modifier for the text boxes are "friend"), then just access the values just assaining the first form name.control name.text = from2.control name.text.
if this is not what u r asking about, then please post ur question in detail.
thanks,
Rahi
-- modified at 0:03 Friday 19th January, 2007
If you look at what you do not have in life, you don't have anything,
If you look at what you have in life, you have everything... "
|
|
|
|
|
thanq rahithi i got using database connections also ....
|
|
|
|
|
i want to use Dijkstra algorithm to find the shortest path.
the node is fix. what i found from other source code is quite advanced where user can DRAW the node and the direction.
for my case, my node is fix and direction is fix, nothing is changing. i just want to find the shortest path, for example A to G, the shortest path is
A -> C -> D -> G. that's all.
i just need the source code to find the shortest path providing i have the matrix done. thx.
i am kind of urgent. thx!
|
|
|
|
|
Why does this smell of homework? Google results[^] for "Dijkstra vb". The second link down is an article right here on CP.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
