|
They must feel it helps organize the drivespace for you.
If it works fine, fine.
As soon as it starts going flaky, slowing down, crashing, etc,
first thing I'd do is repartition it into 1 partition and reinstall the software.
BTW, we had a 6Gig drive arrive partitioned as 2+2+2Gig.
Obviously they used FAT16.
|
|
|
|
|
Where in the registry can I find the information about which is the default mail client in a machine / profile?
Thanks so much,
-- narada
|
|
|
|
|
Check out HKEY_CLASSES_ROOT\Mailto\Shell\Open\Command .
I think that will do what you want.
Good luck.
- Dana
|
|
|
|
|
Super!
Thanks so much, Dana!
That seems to be what I needed!
F
|
|
|
|
|
Am I able to replace my Win 2000 Profesional with Win 2000 Server on my computer through installation/upgrading, while leaving everything that's already on the machine intact?
|
|
|
|
|
No, I don't believe that is possible.
"We will thrive in the new environment, leaping across space and time, everywhere and nowhere, like air or radiation, redundant, self-replicating, and always evolving." -unspecified individual
|
|
|
|
|
In FAT12 & FAT16, every directory has a . and a .. subdirectory.
I seem to remember that this goes back to the old MSDOS days. Anyone know what they are or what they are for?
I'm building an embedded system to read Compact Flash cards and I've got most of the other data about FAT tables etc, but I can't find a refernece to these two directories. Any ideas?
Cheers,
Ali
|
|
|
|
|
The "." directory is used to reference the current directory, while the ".." directory is used to reference the parent directory of the current directory.
Chris Richardson
C/C++ Include Finder[^]
|
|
|
|
|
How do you disable and/or block the windows Messenger pop-ups from sending you spam in winXP? I don't use this function for anything. It's just a back door for spammers to tick me off. Please Help.
"You only disagree because you're a moron. If you were a man of intelligence you would see that I'm obviously right." - The General Consensus
|
|
|
|
|
Try disabling (stopping and setting to manual) the 'Messenger' Service.
Paul Watson wrote:
"At the end of the day it is what you produce that counts, not how many doctorates you have on the wall."
George Carlin wrote:
"Don't sweat the petty things, and don't pet the sweaty things."
|
|
|
|
|
I want to execute a .wsf and .vbs file on a win2k box from a linux box. This script will take hell lot of parameter as well. How do I achieve this quickly. The process must not be interactive i.e should not ask for password.
I want to run this from a linux box and it should just execute the command silently.
Swarup Das
|
|
|
|
|
I am sure there are more practical ways to do it, but for achieving it "quickly", the fastest way I can think of without any real code to write would be to automate the process though SSH.
I would really think about what you want to do to accomplish this, as there are SIGNFICANT security implications if you do this wrong. Anyways.... here would be a simple way to do it:
1) Install Cygwin[^] on the Windows 2000 box and ensure you install the OpenSSH daemon.
2) Set up your SSH daemon to run as a service in W2K. There is a good article on how to do that here[^]
3) Set up your SSH keys so you can SSH into the Windows box without the need for a password with the use of SSH public key authentication. You can learn a bit on how to do that by reading here[^].
4) You should now be able to execute the scripts on the W2K box by automating the call. As an example this might work for ya:
ssh user@w2kbox commandtoexecute
CAUTION: Be careful to understand the implications of setting up SSH to your server. Make sure you have clean ACLs and limit the privileges in what the account you are SSHing in can do. If you require administrative access to run the script, consider using the runas command to do this so that you only elevate privileges for the execution of the script, and nothing more.
P.S> I found the runas command to have some issues under bash in cygwin, so you might have to tinker with this for a bit.
Good luck!
- Dana
|
|
|
|
|
Hello,
I use WinXP Pro. Sometimes CD-ROM Drive disappears???.
I have to go to "Device Manager"->"Scan for hardware changes" then CD-ROM Drive appears again. I don't know why !
Please tell me how to avoid this problem.
Thanks so much
TUI
|
|
|
|
|
A virus or other program has changed the language on all my common controls, whenever anything displays text in a window for the control; dialogs, window titles, save as, etc. the language is germanic. I would assume that this could be fixed in the registry etc.? A virus did this, I have re-installed windows, but the file or entry is still not getting fixed. Has anyone seen this problem and know the registry entry or file(s) to fix to get my language back to English on all the common controls and windows text/messages?
Thanks.
|
|
|
|
|
When you re-install Windows, it seems to do a good job of detecting and preserving your previous settings. That's unfortunate in this case. Try using the Regional Settings applet in Control Panel to reset the settings for your preferred language. This applies specifically to Win2K, but I believe other versions have a similar function. As an afterthought, you might also want to check the startup files (config.sys, win.ini, etc) for a CODEPAGE= command. You shouldn't need one, but if it exists it may override the Windows settings; try REMing it out.
Nobody wants to read a diary by someone who has not seen the shadow of Bubba on the prison shower wall in front of them!
Paul Watson, on BLOGS and privacy - 1/16/2003
|
|
|
|
|
Hi All,
I hope this is the right spot for this question. I need to restore the configuration of a computer to its fresh out of the box state. The person who own this machine has (naturally) lost the accompanying disks that belong to the machine. However, I've found the C:\Windows\Options\CABS folder appears to be intact.
Does anyone know how to restore a machine with the contents of the stuff in the CABS folder? Or, better yet, make a bootable rescue disk out of this?
Any help is appreciated.
Thanks,
Aaron
|
|
|
|
|
The CABs folder holds the files that are usually in the \win95 (or \win98 or \winme ) dir on the CD, so you can just put that whole directory on a CD and install from it. (Note that there might not be a setup.exe there. Some OEM CDs don't have setup.exe - you have access to the CABs to install other Windows components, but you can't do a fresh install from the CD.)
--Mike--
The Internet is a place where absolutely nothing happens.
-- Strong Bad
1ClickPicGrabber - Grab & organize pictures from your favorite web pages, with 1 click!
My really out-of-date homepage
Sonork-100.19012 Acid_Helm
|
|
|
|
|
I have no idea if this is in any way possible but,
I was wondering if it's possible to get the complete hardware list which is used when
detecting new hardware, so all possible hardware supported by windows.
I know microsoft has a hardware compatibility list online, but since hardware detection
uses it also, it has to be somewhere inside the system, my question is Where and more important can I use it in my own programs
|
|
|
|
|
The database is the INF files in \windows\inf I don't know about reading them, though.
--Mike--
The Internet is a place where absolutely nothing happens.
-- Strong Bad
1ClickPicGrabber - Grab & organize pictures from your favorite web pages, with 1 click!
My really out-of-date homepage
Sonork-100.19012 Acid_Helm
|
|
|
|
|
I have some customers who have a problem with Windows displaying the wrong character set in various MS common controls. ie. Print Preview, File Open.
This happens in all apps that uses these controls. In XP I found Control Panel|Regional and Language Options|Advanced lets you choose a language for non-Unicode programs to use to display menus and dialogs. One customer is using W2K, and he managed to find the same setting there, but it was already set to "English".
So has anyone seen or heard of this problem and know how to fix it. ie. Get the normal english text back.
Neville Franks, Author of ED for Windows. www.getsoft.com
Make money with our new Affilate program
|
|
|
|
|
Hi,
I'm having some problems. We have an application that we made and when it runs on a dual CPU machine, we lose one CPU after a while.
After checking, we found out that the Process Affinity was changed. We can set it back using the task manager but only to lose it again later. In no way in our code do we set the process affinity. But it seems to happen only when the CPUs are running at 100%.
Can Windows (this was on Windows 2000, Service pack 3) decide to change the CPU access to an application by itself?
Thanks,
Jason Phillips
|
|
|
|
|
I would worry if you have CPU @ 100% on a dual machine. I would not be surprised if the OS took over and changed the settings to make sure that you app did not kill the box.
Is this Win2k server or Pro?
Paul Watson wrote:
"At the end of the day it is what you produce that counts, not how many doctorates you have on the wall."
George Carlin wrote:
"Don't sweat the petty things, and don't pet the sweaty things."
|
|
|
|
|
It runs correctly on Windows XP. The problem only seems to be located on Windows 2000 Server/Pro.
But I'm starting to think the same as you, in that the OS decides that the application is taking to much processing power and removes a CPU from the app.
|
|
|
|
|
I have a dir on my HDD that is 13,5Gb!!
It's named _RESTORE and is hidden. I don't know if WinME or Win2000 created this (I run both on the same computer) but do you know if there is important data in that file!?!??!
These files are listed inside the dir:
DISKCFG.DAT
SRDISKID.DAT
VxDMon.cfg
VxDMon.DAT
Is there any secure copy of data that is saved by Windows automaticly when crashes happen or what!?!?!?
How can I "run" these to restore the configurations!?!?! if it's necesarey!?
Rickard Andersson@Suza Computing
C# and C++ programmer from SWEDEN!
UIN: 50302279
E-Mail: nikado@pc.nu
Speciality: I love C#, ASP.NET and C++!
|
|
|
|
|
Those are created by System Restore.
--Mike--
Looks like I picked the wrong week to stop sniffing glue.
1ClickPicGrabber - Grab & organize pictures from your favorite web pages, with 1 click!
My really out-of-date homepage
Sonork-100.19012 Acid_Helm
|
|
|
|